[PATCH 14/20] mfd: Add pca9440 register map
Sascha Hauer
s.hauer at pengutronix.de
Tue Jun 23 09:16:00 EDT 2020
The pca9440 is a PMIC found on the i.MX8MP-EVK board. This adds the
register map for it.
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
include/mfd/pca9450.h | 55 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
create mode 100644 include/mfd/pca9450.h
diff --git a/include/mfd/pca9450.h b/include/mfd/pca9450.h
new file mode 100644
index 0000000000..256f661911
--- /dev/null
+++ b/include/mfd/pca9450.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef PCA9450_H_
+#define PCA9450_H_
+
+enum {
+ PCA9450_REG_DEV_ID = 0x00,
+ PCA9450_INT1 = 0x01,
+ PCA9450_INT1_MSK = 0x02,
+ PCA9450_STATUS1 = 0x03,
+ PCA9450_STATUS2 = 0x04,
+ PCA9450_PWRON_STAT = 0x05,
+ PCA9450_SW_RST = 0x06,
+ PCA9450_PWR_CTRL = 0x07,
+ PCA9450_RESET_CTRL = 0x08,
+ PCA9450_CONFIG1 = 0x09,
+ PCA9450_CONFIG2 = 0x0A,
+ PCA9450_BUCK123_DVS = 0x0C,
+ PCA9450_BUCK1OUT_LIMIT = 0x0D,
+ PCA9450_BUCK2OUT_LIMIT = 0x0E,
+ PCA9450_BUCK3OUT_LIMIT = 0x0F,
+ PCA9450_BUCK1CTRL = 0x10,
+ PCA9450_BUCK1OUT_DVS0 = 0x11,
+ PCA9450_BUCK1OUT_DVS1 = 0x12,
+ PCA9450_BUCK2CTRL = 0x13,
+ PCA9450_BUCK2OUT_DVS0 = 0x14,
+ PCA9450_BUCK2OUT_DVS1 = 0x15,
+ PCA9450_BUCK3CTRL = 0x16,
+ PCA9450_BUCK3OUT_DVS0 = 0x17,
+ PCA9450_BUCK3OUT_DVS1 = 0x18,
+ PCA9450_BUCK4CTRL = 0x19,
+ PCA9450_BUCK4OUT = 0x1A,
+ PCA9450_BUCK5CTRL = 0x1B,
+ PCA9450_BUCK5OUT = 0x1C,
+ PCA9450_BUCK6CTRL = 0x1D,
+ PCA9450_BUCK6OUT = 0x1E,
+ PCA9450_LDO_AD_CTRL = 0x20,
+ PCA9450_LDO1CTRL = 0x21,
+ PCA9450_LDO2CTRL = 0x22,
+ PCA9450_LDO3CTRL = 0x23,
+ PCA9450_LDO4CTRL = 0x24,
+ PCA9450_LDO5CTRL_L = 0x25,
+ PCA9450_LDO5CTRL_H = 0x26,
+ PCA9450_LOADSW_CTRL = 0x2A,
+ PCA9450_VRFLT1_STS = 0x2B,
+ PCA9450_VRFLT2_STS = 0x2C,
+ PCA9450_VRFLT1_MASK = 0x2D,
+ PCA9450_VRFLT2_MASK = 0x2E,
+ PCA9450_REG_NUM,
+};
+
+#endif
--
2.27.0
More information about the barebox
mailing list