Getting serial console output on new imx7d tqma7 board UART4

[Lars Pedersen]

Hi Sascha thx for the reply.

/Lars Pedersen

On Mon, 3 Aug 2020 at 23:51, Sascha Hauer <s.hauer at pengutronix.de> wrote:
>
> Hi Lars,
>
> On Thu, Jul 30, 2020 at 12:16:14PM +0200, Lars Pedersen wrote:
>
> > CONFIG_DEBUG_IMX_UART_PORT=1
> > CONFIG_HAS_DEBUG_LL=y
>
> This config still has CONFIG_DEBUG_IMX_UART_PORT=1. You probably sent
> this before you changed it to '4', right? Otherwise this might be the
> issue.

Yes, it has been changed to 4.

>
> Sascha
>
> --
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |