[PATCH] ARM: stm32mp: add support for Seeed Odyssey board

Mon Aug 3 15:15:59 EDT 2020

On Fri, Jul 31, 2020 at 06:59:05AM +0200, Ahmad Fatoum wrote:
> Board consists of SoM with stm32mp157c with 4G eMMC and 512M DDR3 RAM.
> Carrier board features USB and ETH interfaces and SD card connector.
> 
> USB and ETH interfaces not yet operational.
> 
> Boot from eMMC requires boot ack bit set.
> 
> Device Tree taken from v5 of kernel device tree off mailing list[1].
> 
> [1]: https://lore.kernel.org/linux-arm-kernel/20200724145107.35772-3-marcin.sloniewski@gmail.com/
> 
> Tested-by: Jookia <contact at jookia.org>
> Tested-by: Xogium <contact at xogium.me>
> Signed-off-by: Ahmad Fatoum <ahmad at a3f.at>
> ---

Applied, thanks

Sascha


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |