[PATCH 1/2] ARM: i.MX50: Replace expicit casts with IOMEM

[Alexander Kurz]

Signed-off-by: Alexander Kurz <akurz at blala.de>
---
 arch/arm/mach-imx/imx50.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-imx/imx50.c b/arch/arm/mach-imx/imx50.c
index d6ff6dfc2..6d121eaf8 100644
--- a/arch/arm/mach-imx/imx50.c
+++ b/arch/arm/mach-imx/imx50.c
@@ -83,7 +83,7 @@ int imx50_devices_init(void)
 
 void imx50_init_lowlevel_early(unsigned int cpufreq_mhz)
 {
-	void __iomem *ccm = (void __iomem *)MX50_CCM_BASE_ADDR;
+	void __iomem *ccm = IOMEM(MX50_CCM_BASE_ADDR);
 	u32 r;
 
 	imx5_init_lowlevel();
@@ -113,11 +113,11 @@ void imx50_init_lowlevel_early(unsigned int cpufreq_mhz)
 	writel(0x4, ccm + MX5_CCM_CCSR);
 
 	if (cpufreq_mhz == 400)
-		imx5_setup_pll_400((void __iomem *)MX50_PLL1_BASE_ADDR);
+		imx5_setup_pll_400(IOMEM(MX50_PLL1_BASE_ADDR));
 	else
-		imx5_setup_pll_800((void __iomem *)MX50_PLL1_BASE_ADDR);
+		imx5_setup_pll_800(IOMEM(MX50_PLL1_BASE_ADDR));
 
-	imx5_setup_pll_216((void __iomem *)MX50_PLL3_BASE_ADDR);
+	imx5_setup_pll_216(IOMEM(MX50_PLL3_BASE_ADDR));
 
 	/* Switch peripheral to PLL3 */
 	writel(0x00015154, ccm + MX5_CCM_CBCMR);
@@ -126,7 +126,7 @@ void imx50_init_lowlevel_early(unsigned int cpufreq_mhz)
 	/* make sure change is effective */
 	while (readl(ccm + MX5_CCM_CDHIPR));
 
-	imx5_setup_pll_400((void __iomem *)MX50_PLL2_BASE_ADDR);
+	imx5_setup_pll_400(IOMEM(MX50_PLL2_BASE_ADDR));
 
 	/* Switch peripheral to PLL2 */
 	r = 0x02800145 |
-- 
2.11.0