[PATCH] ARM: socfpga: remove unused fpgaintf setup

[Steffen Trumtrar]

The disable bits for the ethernet interfaces between FPGA and HPS are read
and configured, but never written back.
The configuration itself doesn't make that much sense however. So instead of
writing it back to the register, remove the whole read-modify operation altogether.

Reported-by: Ian Abbott <abbotti at mev.co.uk>
Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
---
 arch/arm/mach-socfpga/arria10-generic.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm/mach-socfpga/arria10-generic.c b/arch/arm/mach-socfpga/arria10-generic.c
index b8129eaf23ff..6a10c19d1417 100644
--- a/arch/arm/mach-socfpga/arria10-generic.c
+++ b/arch/arm/mach-socfpga/arria10-generic.c
@@ -37,14 +37,6 @@ static void arria10_init_emac(void)
 	val |= ARRIA10_SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
 	writel(val, ARRIA10_SYSMGR_EMAC2);
 
-	val = readl(ARRIA10_SYSMGR_FPGAINTF_EN_3);
-	val &= ~(ARRIA10_SYSMGR_FPGAINTF_EN3_EMAC0 |
-		 ARRIA10_SYSMGR_FPGAINTF_EN3_EMAC0_SW |
-		 ARRIA10_SYSMGR_FPGAINTF_EN3_EMAC1 |
-		 ARRIA10_SYSMGR_FPGAINTF_EN3_EMAC1_SW |
-		 ARRIA10_SYSMGR_FPGAINTF_EN3_EMAC2 |
-		 ARRIA10_SYSMGR_FPGAINTF_EN3_EMAC2_SW);
-
 	rst = readl(ARRIA10_RSTMGR_ADDR + ARRIA10_RSTMGR_PER0MODRST);
 	rst &= ~(ARRIA10_RSTMGR_PER0MODRST_EMAC0 |
 		 ARRIA10_RSTMGR_PER0MODRST_EMAC1 |
-- 
2.11.0