[PATCH v2 00/11] i.MX7 SabreSD support

[Sam Ravnborg]

Hi Andrey.

On Wed, Jul 26, 2017 at 09:31:09AM -0700, Andrey Smirnov wrote:
> Hi everyone,
> 
> This is a v2 of the patch series to add support for NXP's i.MX7
> SabreSD board. It's most likely lacking some advanced features, but
> basics such as SD card, Ethernet and, of course, booting Linux seem to
> work OK.
> 
> The patchset is updated to use defenitions from Uwe's most recent
> submission ("ARM: i.MX7: provide DDR register definitions") so this
> series has that as a dependency.
> 
> Patch 1/9 contains a fix for a pretty serious screw-up on my part, so
> I think it should be applied to master as well.
> 
> Also, note, that for a reason I haven't been able to track down yet,
> compiling Barebox + this patchset without support for FEC will cause
> upstream kernel (at least 4.12-rc1) to hang during boot while trying
> to access FEC's register file. I suspect clock initialization issue,
> but, as I said, I did not find that out conclusively.
> 
> Anyway, as usual, any feedback is wellcome.
> 
> Thanks,
> Andrey Smirnov

Other than a notpick comment everything looks good to me.
For the whole series:
Acked-by: Sam Ravnborg <sam at ravnborg.org>

	Sam