[PATCH v2 11/11] ARM: i.MX: Add support for NXP i.MX7 SABRESD board

[Sam Ravnborg]

Hi Andrey

On Wed, Jul 26, 2017 at 09:31:20AM -0700, Andrey Smirnov wrote:
> Add minimal code to support NXP i.MX7 SABRESD board. Tested to have
> working SD card and first Ethernet port as well as being able to boot
> upstream Linux kernel (4.12+).
> 
> Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
> ---
>  arch/arm/boards/Makefile                           |  1 +
>  arch/arm/boards/freescale-mx7-sabresd/Makefile     |  2 +
>  arch/arm/boards/freescale-mx7-sabresd/board.c      | 58 +++++++++++++++
>  .../flash-header-mx7-sabresd.imxcfg                | 82 ++++++++++++++++++++++
>  arch/arm/boards/freescale-mx7-sabresd/lowlevel.c   | 46 ++++++++++++
>  arch/arm/dts/Makefile                              |  2 +-
>  arch/arm/dts/imx7d-sdb.dts                         | 70 ++++++++++++++++++
>  arch/arm/mach-imx/Kconfig                          | 12 ++++
>  images/Makefile.imx                                |  5 ++
>  9 files changed, 277 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boards/freescale-mx7-sabresd/Makefile
>  create mode 100644 arch/arm/boards/freescale-mx7-sabresd/board.c
>  create mode 100644 arch/arm/boards/freescale-mx7-sabresd/flash-header-mx7-sabresd.imxcfg
>  create mode 100644 arch/arm/boards/freescale-mx7-sabresd/lowlevel.c
>  create mode 100644 arch/arm/dts/imx7d-sdb.dts
> 
> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> index 9bbdd684f..295a362bd 100644
> --- a/arch/arm/boards/Makefile
> +++ b/arch/arm/boards/Makefile
> @@ -148,3 +148,4 @@ obj-$(CONFIG_MACH_WARP7)			+= element14-warp7/
>  obj-$(CONFIG_MACH_VF610_TWR)			+= freescale-vf610-twr/
>  obj-$(CONFIG_MACH_ZII_RDU2)			+= zii-imx6q-rdu2/
>  obj-$(CONFIG_MACH_ZII_VF610_DEV)		+= zii-vf610-dev/
> +obj-$(CONFIG_MACH_FREESCALE_MX7_SABRESD)	+= freescale-mx7-sabresd/
This one slipped through - this should also be in alphabetic order.

	Sam