[PATCH] ARM: phytec-som-imx6: add automount for first partition on eMMC

[Stefan Christ]

For the phyCORE-i.MX6 add an automount command for the first partition
on the eMMC device.

Signed-off-by: Stefan Christ <s.christ at phytec.de>
---
 .../phytec-som-imx6/defaultenv-physom-imx6-phycore/init/automount      | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boards/phytec-som-imx6/defaultenv-physom-imx6-phycore/init/automount b/arch/arm/boards/phytec-som-imx6/defaultenv-physom-imx6-phycore/init/automount
index 3659cf7..a059e19 100644
--- a/arch/arm/boards/phytec-som-imx6/defaultenv-physom-imx6-phycore/init/automount
+++ b/arch/arm/boards/phytec-som-imx6/defaultenv-physom-imx6-phycore/init/automount
@@ -12,3 +12,6 @@ automount /mnt/tftp 'ifup eth0 && mount -t tftp $eth0.serverip /mnt/tftp'
 
 mkdir -p /mnt/mmc
 automount -d /mnt/mmc 'mmc0.probe=1 && [ -e /dev/mmc0.0 ] && mount /dev/mmc0.0 /mnt/mmc'
+
+mkdir -p /mnt/emmc
+automount -d /mnt/emmc 'mmc3.probe=1 && [ -e /dev/mmc3.0 ] && mount /dev/mmc3.0 /mnt/emmc'
-- 
1.9.1