[PATCH] ARM: dts: i.MX6: update RIoTboard device tree
Sascha Hauer
s.hauer at pengutronix.de
Mon Jul 25 01:17:14 PDT 2016
On Thu, Jul 21, 2016 at 05:10:56PM +0200, Michael Grzeschik wrote:
> From: Ulrich Ölmann <u.oelmann at pengutronix.de>
>
> Barebox and kernel version diverged therefore bring the device tree up to date
> with respect to the kernel being the reference.
>
> Signed-off-by: Ulrich Ölmann <u.oelmann at pengutronix.de>
> Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
> ---
> arch/arm/boards/embest-riotboard/board.c | 2 +-
> arch/arm/dts/imx6s-riotboard.dts | 355 +------------------------------
> 2 files changed, 3 insertions(+), 354 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/boards/embest-riotboard/board.c b/arch/arm/boards/embest-riotboard/board.c
> index a885a08..eb956f1 100644
> --- a/arch/arm/boards/embest-riotboard/board.c
> +++ b/arch/arm/boards/embest-riotboard/board.c
> @@ -64,7 +64,7 @@ static int ar8035_phy_fixup(struct phy_device *dev)
>
> static int riotboard_device_init(void)
> {
> - if (!of_machine_is_compatible("embest,riotboard"))
> + if (!of_machine_is_compatible("riot,imx6s-riotboard"))
> return 0;
>
> phy_register_fixup_for_uid(0x004dd072, 0xffffffef, ar8035_phy_fixup);
> diff --git a/arch/arm/dts/imx6s-riotboard.dts b/arch/arm/dts/imx6s-riotboard.dts
> index 09ac534..7193f28 100644
> --- a/arch/arm/dts/imx6s-riotboard.dts
> +++ b/arch/arm/dts/imx6s-riotboard.dts
> @@ -4,15 +4,11 @@
> * The code contained herein is licensed under the GNU General Public
> * License version 2.
> */
> -/dts-v1/;
>
> -#include <arm/imx6dl.dtsi>
> -#include "imx6dl.dtsi"
> +#include <arm/imx6dl-riotboard.dts>
> +#include "imx6qdl.dtsi"
>
> / {
> - model = "RIoTboard Solo";
> - compatible = "embest,riotboard", "fsl,imx6dl";
> -
> chosen {
> linux,stdout-path = &uart2;
>
> @@ -21,210 +17,13 @@
> device-path = &environment_usdhc4;
> };
> };
> -
> - memory {
> - reg = <0x10000000 0x40000000>;
> - };
> -
> - gpio-leds {
> - compatible = "gpio-leds";
> -
> - d45 {
> - label = "d45";
> - gpios = <&gpio5 2 1>;
> - linux,default-trigger = "heartbeat";
> - };
> -
> - d46 {
> - label = "d46";
> - gpios = <&gpio3 28 1>;
> - linux,default-trigger = "default-on";
> - };
> - };
> -
> -
> - regulators {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - reg_3p3v: regulator at 1 {
> - compatible = "regulator-fixed";
> - reg = <1>;
> - regulator-name = "3P3V";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - };
> - };
> -};
> -
> -&iomuxc {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_hog>;
> -
> - imx6s-riotboard {
> - pinctrl_hog: hoggrp {
> - fsl,pins = <
> - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 /* LED D45 */
> - MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x80000000 /* LED D46 */
> - MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x80000000 /* PMIC_INT_B */
> - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0 /* CAM_MCLK + SGTL_MCLK */
> - >;
> - };
> - pinctrl_uart2: uart2grp {
> - fsl,pins = <
> - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
> - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
> - >;
> - };
> - pinctrl_rgmii_ar8035: rgmii_ar8035 {
> - fsl,pins = <
> - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
> - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
> - /* AR8035 reset */
> - MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0
> - /* AR8035 interrupt */
> - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000
> - /* GPIO16 -> AR8035 25MHz */
> - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000
> - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000
> - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
> - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
> - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
> - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
> - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
> - /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
> - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1
> - /* AR8035 pin strapping: IO voltage: pull up */
> - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
> - /* AR8035 pin strapping: PHYADDR#0: pull down */
> - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0
> - /* AR8035 pin strapping: PHYADDR#1: pull down */
> - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0
> - /* AR8035 pin strapping: MODE#1: pull up */
> - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
> - /* AR8035 pin strapping: MODE#3: pull up */
> - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
> - /* AR8035 pin strapping: MODE#0: pull down */
> - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0
> - >;
> - };
> - pinctrl_usdhc4: usdhc4grp {
> - fsl,pins = <
> - MX6QDL_PAD_SD4_CLK__SD4_CLK 0x80000000
> - MX6QDL_PAD_SD4_CMD__SD4_CMD 0x80000000
> - MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x80000000
> - MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x80000000
> - MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x80000000
> - MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x80000000
> - >;
> - };
> - pinctrl_usdhc2: usdhc2grp {
> - fsl,pins = <
> - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x80000000
> - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x80000000
> - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x80000000
> - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x80000000
> - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x80000000
> - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x80000000
> - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
> - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000
> - >;
> - };
> - pinctrl_usdhc3: usdhc3grp {
> - fsl,pins = <
> - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x80000000
> - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x80000000
> - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x80000000
> - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x80000000
> - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x80000000
> - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x80000000
> - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x80000000
> - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
> - >;
> - };
> - pinctrl_usbotg: usbotggrp {
> - fsl,pins = <
> - MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x80000000
> - MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x80000000
> - MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x80000000
> - >;
> - };
> - pinctrl_i2c1_2: i2c1grp-2 {
> - fsl,pins = <
> - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
> - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
> - >;
> - };
> - pinctrl_i2c2_2: i2c2grp-2 {
> - fsl,pins = <
> - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
> - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
> - >;
> - };
> - pinctrl_i2c3_2: i2c3grp-2 {
> - fsl,pins = <
> - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
> - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
> - >;
> - };
> - pinctrl_i2c4_2: i2c4grp-2 {
> - fsl,pins = <
> - MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
> - MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
> - >;
> - };
> - };
> -};
> -
> -&uart2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_uart2>;
> - status = "okay";
> };
>
> &fec {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_rgmii_ar8035>;
> - phy-mode = "rgmii";
> phy-reset-duration = <2>;
> - phy-reset-gpios = <&gpio3 31 0>;
> - status = "okay";
> -};
> -
> -&usdhc2 {
> - /* SD card socket - bottom */
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_usdhc2>;
> - bus-width = <4>;
> - cd-gpios = <&gpio1 4 0>;
> - wp-gpios = <&gpio1 2 0>;
> - status = "okay";
> - #address-cells = <1>;
> - #size-cells = <1>;
> -};
> -
> -&usdhc3 {
> - /* uSD card socket - top */
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_usdhc3>;
> - bus-width = <4>;
> - cd-gpios = <&gpio7 0 0>;
> - wp-gpios = <&gpio7 1 0>;
> - status = "okay";
> - #address-cells = <1>;
> - #size-cells = <1>;
> };
>
> &usdhc4 {
> - /* eMMC */
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_usdhc4>;
> - bus-width = <4>;
> - non-removable;
> - status = "okay";
> -
> #address-cells = <1>;
> #size-cells = <1>;
>
> @@ -239,156 +38,6 @@
> };
> };
>
> -&usbh1 {
> - status = "okay";
> - phy_type = "utmi";
> - disable-over-current;
> -};
> -
> -&usbotg {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_usbotg>;
> - phy_type = "utmi";
> - dr_mode = "peripheral";
> - otg_id_pin_select_change;
> - status = "okay";
> -};
> -
> -&i2c1 {
> - status = "okay";
> - clock-frequency = <100000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c1_2>;
> -
> - pmic: pf0100 at 08 {
> - compatible = "pf0100-regulator";
> - reg = <0x08>;
> - interrupt-parent = <&gpio5>;
> - interrupts = <16 8>;
> -
> - regulators {
> - reg_vddcore: sw1ab {
> - regulator-min-microvolt = <300000>;
> - regulator-max-microvolt = <1875000>;
> - regulator-always-on;
> - };
> -
> - reg_vddsoc: sw1c {
> - regulator-min-microvolt = <300000>;
> - regulator-max-microvolt = <1875000>;
> - regulator-always-on;
> - };
> -
> - reg_gen_3v3: sw2 {
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - };
> -
> - reg_ddr_1v5a: sw3a {
> - regulator-min-microvolt = <400000>;
> - regulator-max-microvolt = <1975000>;
> - regulator-always-on;
> - };
> -
> - reg_ddr_1v5b: sw3b {
> - regulator-min-microvolt = <400000>;
> - regulator-max-microvolt = <1975000>;
> - regulator-always-on;
> - };
> -
> - reg_ddr_vtt: sw4 {
> - regulator-min-microvolt = <400000>;
> - regulator-max-microvolt = <1975000>;
> - regulator-always-on;
> - };
> -
> - reg_5v_600mA: swbst {
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5150000>;
> - regulator-always-on;
> - };
> -
> - reg_snvs_3v: vsnvs {
> - regulator-min-microvolt = <1500000>;
> - regulator-max-microvolt = <3000000>;
> - regulator-always-on;
> - };
> -
> - reg_vrefddr: vrefddr {
> - regulator-min-microvolt = <750000>;
> - regulator-max-microvolt = <750000>;
> - regulator-always-on;
> - };
> -
> - reg_vgen1_1v5: vgen1 {
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1550000>;
> - /* not used */
> - };
> -
> - reg_vgen2_1v2_eth: vgen2 {
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1550000>;
> - regulator-always-on;
> - };
> -
> - reg_vgen3_2v8: vgen3 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - };
> -
> - reg_vgen4_1v8: vgen4 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - };
> -
> - reg_vgen5_2v5_sgtl: vgen5 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - };
> -
> - reg_vgen6_3v3: vgen6 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - };
> - };
> - };
> -
> - codec: sgtl5000 at 0a {
> - compatible = "fsl,sgtl5000";
> - reg = <0x0a>;
> - clocks = <&clks 201>;
> - VDDA-supply = <®_vgen5_2v5_sgtl>;
> - VDDIO-supply = <®_3p3v>;
> - };
> -};
> -
> -&i2c2 {
> - status = "okay";
> - clock-frequency = <100000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c2_2>;
> -};
> -
> -&i2c3 {
> - status = "okay";
> - clock-frequency = <100000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c3_2>;
> -};
> -
> -&i2c4 {
> - status = "okay";
> - clock-frequency = <100000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c4_2>;
> -};
> -
> &ocotp {
> barebox,provide-mac-address = <&fec 0x620>;
> };
> --
> 2.8.1
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list