[PATCH v2 00/21] Vybrid related patches

[Andrey Smirnov]

Hi everyone,

This is second version of my "Vybrid related patches" patchset (for v1
see [1]), and the changes are as follows:

    - Converted multi-MAC patch to name the device variables as per
      discussion with Sascha and Stefan [2]. (Stefan, I hope you don't
      mind my taking the liberty to implement this and it is not too
      much inconvenice to rebase your patch on top of this change. Let
      me know if there's a better way for us to sync up on this)

    - Dropped configurability from VF610 clock ramping code

    - Converted said code to use imx_ocotp_read_field

    - Added fusemap for VF610 to accomodate previous change

    - Added imx_ocotp_sense_enable() API to accomodate reading speed
      grading information on VF610 (it doesn't seem to be read into
      shadow memory on chip's bootup)

    - Add a number of small code cleanups for OCOTP driver


[1] http://lists.infradead.org/pipermail/barebox/2016-December/028652.html
[2] http://lists.infradead.org/pipermail/barebox/2016-December/028669.html

Andrey Smirnov (21):
  i.MX: esdhc: Enable host->clk during initialization
  i.MX: ocotp: Move memory reversing into a subroutine
  i.MX: ocotp: Simplify MAC address storing logic
  i.MX: ocotp: Add provisions for storing multiple MAC addresses
  i.MX: ocotp: Initialize OCOTP as early as possible
  i.MX: clk: Add IMX_PLLV3_SYS_VF610 subtype
  i.MX: ocotp: Add imx_ocotp_sense_enable()
  i.MX: imx6-fusemap: Fix SJC_RESP_LOCK width
  i.MX: Add fusemap for VF610
  i.MX: vf610: Ramp CPU clock to maximum frequency
  i.MX: iomuxv3: Add low-level pad code to headers
  i.MX: iomuxv3: Add helper type to deconstruct iomux_v3_cfg_t values
  i.MX: iomuxv3: Add low-level pad configuration routine
  i.MX6: sabresd: Remove magic numbers in setup_uart
  i.MX: iomuxv3: Use helper functions in iomux-v3.h
  i.MX: vf610: Add low-level pin configuration helper
  i.MX: iomux-vf610: Add missing pad definitions
  i.MX: imx-usb-phy: Add VF610 OF compatiblity string
  i.MX: Default CONFI_USB_IMX_PHY to 'y' on Vybrid
  i.MX: imx-usb-misc: Add Vybrid support
  i.MX: vf610-twr: Remove MSCM setup code

 arch/arm/boards/freescale-mx6-sabresd/lowlevel.c |   9 +-
 arch/arm/boards/freescale-vf610-twr/lowlevel.c   |   5 -
 arch/arm/mach-imx/Kconfig                        |   1 +
 arch/arm/mach-imx/include/mach/imx6-fusemap.h    |  42 +-----
 arch/arm/mach-imx/include/mach/iomux-v3.h        |  61 +++++++++
 arch/arm/mach-imx/include/mach/iomux-vf610.h     |  20 +++
 arch/arm/mach-imx/include/mach/ocotp-fusemap.h   |  49 +++++++
 arch/arm/mach-imx/include/mach/ocotp.h           |   1 +
 arch/arm/mach-imx/include/mach/vf610-fusemap.h   |  15 +++
 arch/arm/mach-imx/ocotp.c                        |  93 +++++++++----
 drivers/clk/imx/clk-pllv3.c                      | 108 +++++++++++++++
 drivers/clk/imx/clk-vf610.c                      | 163 ++++++++++++++++++++++-
 drivers/clk/imx/clk.h                            |   5 +
 drivers/mci/imx-esdhc.c                          |   7 +
 drivers/pinctrl/imx-iomux-v3.c                   |  38 +-----
 drivers/pinctrl/pinctrl-vf610.c                  |  11 +-
 drivers/usb/imx/Kconfig                          |   2 +-
 drivers/usb/imx/imx-usb-misc.c                   |  28 ++++
 drivers/usb/imx/imx-usb-phy.c                    |   2 +
 19 files changed, 542 insertions(+), 118 deletions(-)
 create mode 100644 arch/arm/mach-imx/include/mach/ocotp-fusemap.h
 create mode 100644 arch/arm/mach-imx/include/mach/vf610-fusemap.h

-- 
2.5.5