[PATCH] MIPS: dts: reuse TP-LINK MR3020 dts file from linux

Antony Pavlov antonynpavlov at gmail.com
Thu Aug 18 02:43:28 PDT 2016


On Thu, 18 Aug 2016 08:32:27 +0200
Sascha Hauer <s.hauer at pengutronix.de> wrote:

> On Wed, Aug 17, 2016 at 12:36:09AM +0300, Antony Pavlov wrote:
> > At the moment barebox tplink-mr3020.dts file has almost
> > the same content as linux ar9331_tl_mr3020.dts file
> > so we can reuse linux dts-file and drop duplicated lines
> > from barebox dts-file.
> > 
> > Signed-off-by: Antony Pavlov <antonynpavlov at gmail.com>
> > ---
> >  arch/mips/dts/tplink-mr3020.dts | 68 +----------------------------------------
> >  1 file changed, 1 insertion(+), 67 deletions(-)
> 
> Applied, thanks
> 
> There is no difference between the two patches you sent, right?

Yes, there is no difference. My bad --- I have used wrong maillist address in the first patch
(barebox at lists.infradead.orgc instead of barebox at lists.infradead.org).
 
> Sascha
> 
> 
> > 
> > diff --git a/arch/mips/dts/tplink-mr3020.dts b/arch/mips/dts/tplink-mr3020.dts
> > index 831fab8..1e843ee 100644
> > --- a/arch/mips/dts/tplink-mr3020.dts
> > +++ b/arch/mips/dts/tplink-mr3020.dts
> > @@ -1,73 +1,7 @@
> > -/dts-v1/;
> > -
> > -#include <dt-bindings/gpio/gpio.h>
> > -
> > -#include <mips/qca/ar9331.dtsi>
> > +#include <mips/qca/ar9331_tl_mr3020.dts>
> >  
> >  / {
> > -	model = "TP-Link TL-MR3020";
> > -	compatible = "tplink,tl-mr3020";
> > -
> >  	aliases {
> >  		spiflash = &spiflash;
> >  	};
> > -
> > -	memory at 0 {
> > -		device_type = "memory";
> > -		reg = <0x00000000 0x2000000>;
> > -	};
> > -
> > -	leds {
> > -		compatible = "gpio-leds";
> > -
> > -		wlan {
> > -			label = "tp-link:green:wlan";
> > -			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
> > -			default-state = "off";
> > -		};
> > -
> > -		lan {
> > -			label = "tp-link:green:lan";
> > -			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
> > -			default-state = "off";
> > -		};
> > -
> > -		wps {
> > -			label = "tp-link:green:wps";
> > -			gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
> > -			default-state = "off";
> > -		};
> > -
> > -		led3g {
> > -			label = "tp-link:green:3g";
> > -			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
> > -			default-state = "off";
> > -		};
> > -	};
> > -};
> > -
> > -&ref {
> > -	clock-frequency = <25000000>;
> > -};
> > -
> > -&uart {
> > -	status = "okay";
> > -};
> > -
> > -&gpio {
> > -	status = "okay";
> > -};
> > -
> > -&spi {
> > -	num-chipselects = <1>;
> > -	status = "okay";
> > -
> > -	/* Spansion S25FL032PIF SPI flash */
> > -	spiflash: s25sl032p at 0 {
> > -		#address-cells = <1>;
> > -		#size-cells = <1>;
> > -		compatible = "spansion,s25sl032p", "jedec,spi-nor";
> > -		spi-max-frequency = <104000000>;
> > -		reg = <0>;
> > -	};
> >  };
> > -- 
> > 2.8.1
> > 
> > 
> > _______________________________________________
> > barebox mailing list
> > barebox at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> > 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |


-- 
-- 
Best regards,
  Antony Pavlov



More information about the barebox mailing list