[PATCH 10/10] ARM: pbl: Add an option to validate DRAM

[Andrey Smirnov]

On Tue, May 19, 2015 at 12:06 AM, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> Hi Andrey,
>
> On Wed, May 13, 2015 at 07:54:27PM -0700, Andrey Smirnov wrote:
>> Add an option to perform DRAM region validation before using it. The
>> framework allows individual boards to set up a memory validaion hook
>> that would be called prior to Barebox using that region of memory.
>>
>> Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
>
> What usecase do you have for this patch?

The usecase is to be able to have a hardware verification build of the
boot-loader which can be used to test the boards in manufacturing.

> Is it debugging or something  you always want to enable on your hardware?

I need it to be always enabled only in a special build of the BL.

> Why must the validate_memory_range function be board specific?

Because the choice of a memory validation algorithm depends on many factors:
- Speed vs. how extensive you want your tests to be
- Chosen memory fault model (DDR vs. SRAM would be different)
- etc.

Also various memory controllers also might various degree of low level
control so some might allow the developer to flip more switches and
test more corner cases.

>
> I see that you call validate_memory_range on potentially large areas of
> memory, so I wonder if you can't call validate_memory_range from your
> board setup code with the complete memory instead.

Even with the current algorithm implemented in mem_test() (which ,
having read a number of academic papers on memory testing, I don't
believe is comprehensible enough) testing any significant of memory
takes a very noticeable amount of time. I wanted to spend as little
amount of time without having access to extended Barebox functionality
to communicate with the rest of the world(like networking, proper
serial) as possible so I set up the algorithm the way it is and
configured Barebox to have a small(3MB) heap.

Also, testing all of the memory in PBL code brings up the question of
what is the point of 'memtest' command? If the only comprehensive way
of testing memory is in PBL code than, IMHO, that function is not very
useful.

> I am not very fond of overly using get_runtime_offset to calculate
> pointers. Setting callback functions from early code which does not run
> on its link address is something I really want to avoid.

I agree with you on this point. I don't like that code very much either.

>
> Sascha
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |