[PATCH v2 10/27] MCI: dw-mmc: convert to streaming DMA ops
Lucas Stach
dev at lynxeye.de
Thu Mar 5 13:50:04 PST 2015
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev at lynxeye.de>
---
drivers/mci/Kconfig | 2 +-
drivers/mci/dw_mmc.c | 24 ++++++++++++------------
2 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig
index dbcc38d..a5cf2fe 100644
--- a/drivers/mci/Kconfig
+++ b/drivers/mci/Kconfig
@@ -36,7 +36,7 @@ comment "--- MCI host drivers ---"
config MCI_DW
bool "Synopsys DesignWare Memory Card Interface"
- depends on ARM
+ depends on HAS_DMA
help
This selects support for the Synopsys DesignWare Mobile Storage IP
block, this provides host support for SD and MMC interfaces, in both
diff --git a/drivers/mci/dw_mmc.c b/drivers/mci/dw_mmc.c
index 0ec37b6..ac940e8 100644
--- a/drivers/mci/dw_mmc.c
+++ b/drivers/mci/dw_mmc.c
@@ -29,7 +29,6 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <asm-generic/errno.h>
-#include <asm/mmu.h>
#define DWMCI_CTRL 0x000
#define DWMCI_PWREN 0x004
@@ -282,7 +281,6 @@ dwmci_cmd(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data)
uint64_t start;
int ret;
unsigned int num_bytes = 0;
- const void *writebuf = NULL;
start = get_time_ns();
while (1) {
@@ -300,12 +298,12 @@ dwmci_cmd(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data)
if (data) {
num_bytes = data->blocks * data->blocksize;
- if (data->flags & MMC_DATA_WRITE) {
- dma_flush_range((unsigned long)data->src,
- (unsigned long)(data->src + data->blocks * 512));
-
- writebuf = data->src;
- }
+ if (data->flags & MMC_DATA_WRITE)
+ dma_sync_single_for_device((unsigned long)data->src,
+ num_bytes, DMA_TO_DEVICE);
+ else
+ dma_sync_single_for_device((unsigned long)data->dest,
+ num_bytes, DMA_FROM_DEVICE);
ret = dwmci_prepare_data(host, data);
if (ret)
@@ -389,10 +387,12 @@ dwmci_cmd(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data)
ctrl &= ~(DWMCI_DMA_EN);
dwmci_writel(host, DWMCI_CTRL, ctrl);
- if (data->flags & MMC_DATA_READ) {
- dma_inv_range((unsigned long)data->dest,
- (unsigned long)(data->dest + data->blocks * 512));
- }
+ if (data->flags & MMC_DATA_WRITE)
+ dma_sync_single_for_cpu((unsigned long)data->src,
+ num_bytes, DMA_TO_DEVICE);
+ else
+ dma_sync_single_for_cpu((unsigned long)data->dest,
+ num_bytes, DMA_FROM_DEVICE);
}
udelay(100);
--
2.1.0
More information about the barebox
mailing list