beagle bone black: problem of boot from eMMC

[ManuelCurcio at Eaton.com]

Hi,

I just see your emails (some problem with my spam folder configuration ?..).
I seen also the patch, it works fine.
Thank you!



-----------------------------
Eaton Industries (France) S.A.S ~ Siège social: 110 Rue Blaise Pascal, Immeuble Le Viséo - Bâtiment A Innovallée, 38330, Montbonnot-St.-Martin, France ~ Lieu d'enregistrement au registre du commerce: Grenoble ~ Numéro d'enregistrement: 509 653 176 ~ Capital social souscrit et liberé:€ 16215441 ~ Numéro de TVA: FR47509653176

-----------------------------

-----Original Message-----
From: Sascha Hauer [mailto:s.hauer at pengutronix.de] 
Sent: mardi 6 janvier 2015 10:06
To: Teresa Gámez
Cc: Curcio, Manuel; barebox at lists.infradead.org
Subject: Re: beagle bone black: problem of boot from eMMC

On Mon, Jan 05, 2015 at 10:41:52AM +0100, Teresa Gámez wrote:
> Hello Manuel,
> 
> Am Mittwoch, den 31.12.2014, 14:52 +0000 schrieb ManuelCurcio at Eaton.com:
> > 
> > After, I wanted to boot from the the internal eMMC. 
> > So after boot from sd card, I mounted the eMMC (mount /dev/mmc1.0) 
> > and copied the MLO and barebox.bin in the /mnt/mmc1.0 folder.
> > 
> > When I try to boot from the internal eMMC ,I have the following error: 
> > --------->
> > barebox 2014.12.0 #2 Wed Dec 31 15:29:16 GMT 2014
> > 
> > 
> > Board: TI AM335x BeagleBone
> > detected 'BeagleBone Black'
> > omap-hsmmc 48060000.mmc: registered as 48060000.mmc booting from MMC 
> > fat fat0: probe failed: error 22 Unable to mount  (-22) booting 
> > failed
> > <---------
> 
> This issue comes from commit:
> 
> commit 0d6392de4ad824a6553c0e3e3e18edef689a7c85
> Author: Sascha Hauer <s.hauer at pengutronix.de>
> Date:   Thu Jun 5 12:09:07 2014 +0200
> 
>     ARM: AM335x: Beaglebone: Use stripped down devicetree for MLO
> 
> For the MLO only the am335x-bone-common.dtsi is used to create the 
> device tree. But this does not have the emmc support included.

Damn. Somehow I knew I was guilty :(

> 
> > 
> > I tried myself to find a 'correction' by added the call of
> > am33xx_of_register_bootdevice(void) function at the end of the 
> > static int beaglebone_devices_init(void) function. With this 
> > modification, sometime (depending of the last boot: from SD Card or 
> > from eMMC)  I can boot, someting not.
> 
> What you are also missing is a disabled emmc node from the 
> am335x-boneblack.dts in the am335x-bone-common.dtsi.

I just sent a patch which fixes this.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |