nvidia jetson tk1 help

Ryan Du Bois rdub at kamama.com
Thu Sep 25 13:53:24 PDT 2014

Oh, I see! I thought the image names were named after the default kernel source (e.g., where they'd read the kernel from), not where barebox itself was loaded from...
Makes sense now...

+Ryan Du Bois
rdub at kamama.com

On Sep 25, 2014, at 1:51 PM, Lucas Stach <dev at lynxeye.de> wrote:

> Am Donnerstag, den 25.09.2014, 10:55 -0700 schrieb Ryan Du Bois:
>> Okay, that worked, but I have to use the *-usbloader.img image.  The emmc image doesn't output anything over UART.  
>> Is that expected?
> That's expected. As said in the docs the images for Tegra are specific
> for the boot source. If you are starting with tegrarcm this would be the
> -usbloader boot source. If you want to persist barebox on the EMMC by
> copying the image to the boot0 partition you need to use the -emmc
> image, the -usbloader image won't come up there.
> If the doc isn't clear enough in that regard and you have suggestions on
> how to improve this: patches welcome. :)
> Regards,
> Lucas

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 496 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <http://lists.infradead.org/pipermail/barebox/attachments/20140925/69362532/attachment.sig>

More information about the barebox mailing list