[PATCH v2 00/19] PCI and Tegra series revamp

[Sascha Hauer]

On Sat, Oct 04, 2014 at 07:40:06PM +0200, Lucas Stach wrote:
> Ok, I got around to work a bit more on this. I now
> actually finished the rtl8169 network driver, so
> this series yields working PCI attached ethernet
> on Tegra30 Beaver.
> 
> For Jetson K1 some work is left to setup the PHYs, but
> that shouldn't be far out. 
> 
> While working on this I stumbled upon a few more issues,
> so I decided to just roll the fixes into this series
> and resend.
> 
> Lucas Stach (19):
>   MIPS: malta: fix pci IO resource assignment
>   pci: split out device init
>   pci: add resource enum
>   pci: properly populate prefetchable BARs
>   pci: setup bridges and traverse buses behind them
>   pci: defer device registration until after bridge setup
>   pci: prettyprint device names
>   pci: track parent<->child relationship
>   commands: lspci: go down into subordinate busses
>   clk: tegra: add PLLE setup functions
>   clk: tegra30: add PCIe clocks
>   i2c: tegra: move to fs initcall
>   ARM: tegra: beaver: enable PEX voltage rail
>   tegra: pmc: add powerdomain handling
>   of: import pci range parser from linux
>   pci: add Tegra host controller driver
>   ARM: tegra: advertise PCI support
>   net: add rtl8169 driver
>   ARM: tegra: enable network related options in defconfig

Applied, thanks

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |