[PATCH] ARM: i.MX6 Phytec phyFLEX: Fix imx6_bbu_nand_register_handler usage

[Andrey Smirnov]

Sure. Will post the patch in a separate thread.

On Tue, Nov 11, 2014 at 6:06 AM, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> On Mon, Nov 10, 2014 at 09:46:10AM -0800, Andrey Smirnov wrote:
>> imx6_bbu_nand_register_handler is not availible if
>> CONFIG_BAREBOX_UPDATE_IMX6_NAND is not selected. Fix this by wrapping
>> it's usage in preprocessor statements.
>>
>> Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
>> ---
>>  arch/arm/boards/phytec-phyflex-imx6/board.c | 3 ++-
>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boards/phytec-phyflex-imx6/board.c b/arch/arm/boards/phytec-phyflex-imx6/board.c
>> index 09a5c79..9acbd7a 100644
>> --- a/arch/arm/boards/phytec-phyflex-imx6/board.c
>> +++ b/arch/arm/boards/phytec-phyflex-imx6/board.c
>> @@ -81,8 +81,9 @@ static int phytec_pfla02_init(void)
>>
>>       phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
>>                                          ksz9031rn_phy_fixup);
>> -
>> +#ifdef CONFIG_BAREBOX_UPDATE_IMX6_NAND
>>       imx6_bbu_nand_register_handler("nand", BBU_HANDLER_FLAG_DEFAULT);
>> +#endif
>
> the bbu handler register functions normally have a static inline wrapper
> if disabled. imx6_bbu_nand_register_handler is a static inline when
> CONFIG_BAREBOX_UPDATE is disabled. Maybe this should rather be under
> CONFIG_BAREBOX_UPDATE_IMX6_NAND instead. Could you update the patch
> accordingly?
>
> Sascha
>
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |