[PATCH] ARM: i.MX6 Phytec phyFLEX: Fix imx6_bbu_nand_register_handler usage

[Sascha Hauer]

On Mon, Nov 10, 2014 at 09:46:10AM -0800, Andrey Smirnov wrote:
> imx6_bbu_nand_register_handler is not availible if
> CONFIG_BAREBOX_UPDATE_IMX6_NAND is not selected. Fix this by wrapping
> it's usage in preprocessor statements.
> 
> Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
> ---
>  arch/arm/boards/phytec-phyflex-imx6/board.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boards/phytec-phyflex-imx6/board.c b/arch/arm/boards/phytec-phyflex-imx6/board.c
> index 09a5c79..9acbd7a 100644
> --- a/arch/arm/boards/phytec-phyflex-imx6/board.c
> +++ b/arch/arm/boards/phytec-phyflex-imx6/board.c
> @@ -81,8 +81,9 @@ static int phytec_pfla02_init(void)
>  
>  	phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
>  					   ksz9031rn_phy_fixup);
> -
> +#ifdef CONFIG_BAREBOX_UPDATE_IMX6_NAND
>  	imx6_bbu_nand_register_handler("nand", BBU_HANDLER_FLAG_DEFAULT);
> +#endif

the bbu handler register functions normally have a static inline wrapper
if disabled. imx6_bbu_nand_register_handler is a static inline when
CONFIG_BAREBOX_UPDATE is disabled. Maybe this should rather be under
CONFIG_BAREBOX_UPDATE_IMX6_NAND instead. Could you update the patch
accordingly?

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |