Antwort: Re: i.MX6Q Boot from NAND

[Sascha Hauer]

On Wed, Feb 26, 2014 at 08:15:00AM +0100, andreas.willig at rafi.de wrote:
>    Hi Sascha
>    i saw this Thread too in the archives, but since no code was entered into
>    repo i suppose the effort was not successful. By my opinion it should be
>    solvable, since U-Boot get's it running and sources are not that different
>    concerning this point. I did compare the BCB section in U-Boot with BCB
>    sections in Barebox and for the first point of view, i did not find the
>    difference, I'm just about to debug this using Lauterbach.
> 
>    Btw is there a well known procedure to keep i.MX6Q cool? I got a passive
>    cooler, but especially during debugging system get's heat up over 80�C !!!
>    Which issues a reset using u-boot.

Philipp has recently sent a patch which turns off the GPU clocks in
barebox. This could help a little. The path sits in -next right now.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |