[PATCH] Adding minimal support for the UDOO board.
Raphaël POGGI
poggi.raph at gmail.com
Sun Feb 16 17:20:08 EST 2014
From: Raphael Poggi <poggi.raph at gmail.com>
For more information about the board: http://www.udoo.org/
Signed-off-by: Raphael Poggi <poggi.raph at gmail.com>
---
arch/arm/boards/Makefile | 1 +
arch/arm/boards/udoo/Makefile | 3 +
arch/arm/boards/udoo/board.c | 204 ++++++++++++++++++++++
arch/arm/boards/udoo/env/config-board | 6 +
arch/arm/boards/udoo/flash-header-mx6-udoo.imxcfg | 104 +++++++++++
arch/arm/boards/udoo/lowlevel.c | 17 ++
arch/arm/configs/imx_v7_defconfig | 1 +
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/imx6q-udoo.dts | 23 +++
arch/arm/dts/imx6qdl-udoo.dtsi | 108 ++++++++++++
arch/arm/mach-imx/Kconfig | 5 +
images/Makefile.imx | 5 +
12 files changed, 480 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boards/udoo/Makefile
create mode 100644 arch/arm/boards/udoo/board.c
create mode 100644 arch/arm/boards/udoo/env/config-board
create mode 100644 arch/arm/boards/udoo/flash-header-mx6-udoo.imxcfg
create mode 100644 arch/arm/boards/udoo/lowlevel.c
create mode 100644 arch/arm/dts/imx6q-udoo.dts
create mode 100644 arch/arm/dts/imx6qdl-udoo.dtsi
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index befddd0..a45adee 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -91,6 +91,7 @@ obj-$(CONFIG_MACH_TX25) += karo-tx25/
obj-$(CONFIG_MACH_TX28) += karo-tx28/
obj-$(CONFIG_MACH_TX51) += karo-tx51/
obj-$(CONFIG_MACH_TX53) += karo-tx53/
+obj-$(CONFIG_MACH_UDOO) += udoo/
obj-$(CONFIG_MACH_USB_A9260) += usb-a926x/
obj-$(CONFIG_MACH_USB_A9263) += usb-a926x/
obj-$(CONFIG_MACH_USB_A9G20) += usb-a926x/
diff --git a/arch/arm/boards/udoo/Makefile b/arch/arm/boards/udoo/Makefile
new file mode 100644
index 0000000..ae17789
--- /dev/null
+++ b/arch/arm/boards/udoo/Makefile
@@ -0,0 +1,3 @@
+obj-y += board.o flash-header-mx6-udoo.dcd.o
+extra-y += flash-header-mx6-udoo.dcd.S flash-header-mx6-udoo.dcd
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/udoo/board.c b/arch/arm/boards/udoo/board.c
new file mode 100644
index 0000000..8302609
--- /dev/null
+++ b/arch/arm/boards/udoo/board.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2014 Raphaël Poggi
+ * Copyright (C) 2012 Steffen Trumtrar, Pengutronix
+ *
+ * based on arch/arm/boards/freescale-mx6-arm2/board.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <environment.h>
+#include <mach/imx6-regs.h>
+#include <fec.h>
+#include <gpio.h>
+#include <mach/bbu.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+#include <partition.h>
+#include <linux/phy.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <mach/generic.h>
+#include <sizes.h>
+#include <net.h>
+#include <linux/micrel_phy.h>
+#include <mach/imx6.h>
+#include <mach/devices-imx6.h>
+#include <mach/iomux-mx6.h>
+#include <spi/spi.h>
+#include <mach/spi.h>
+#include <mach/usb.h>
+
+static iomux_v3_cfg_t udoo_enet_gpio_pads_1[] = {
+ MX6Q_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
+ MX6Q_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
+ MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
+ MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
+ MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
+ MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
+ MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
+ MX6Q_PAD_RGMII_TX_CTL__ENET_RGMII_TX_CTL | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
+ MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
+ MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
+ /* RGMII reset */
+ /* alimentazione ethernet*/
+ MX6Q_PAD_EIM_EB3__GPIO_2_31 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* pin 32 - 1 - (MODE0) all */
+ MX6Q_PAD_RGMII_RD0__GPIO_6_25 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* pin 31 - 1 - (MODE1) all */
+ MX6Q_PAD_RGMII_RD1__GPIO_6_27 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* pin 28 - 1 - (MODE2) all */
+ MX6Q_PAD_RGMII_RD2__GPIO_6_28 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* pin 27 - 1 - (MODE3) all */
+ MX6Q_PAD_RGMII_RD3__GPIO_6_29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */
+};
+
+static iomux_v3_cfg_t udoo_enet_gpio_pads_2[] = {
+ /* Ethernet */
+ MX6Q_PAD_RGMII_RXC__GPIO_6_30, /* PHYAD */
+ MX6Q_PAD_RGMII_RD0__GPIO_6_25, /* MODE0 */
+ MX6Q_PAD_RGMII_RD1__GPIO_6_27, /* MODE1 */
+ MX6Q_PAD_RGMII_RD2__GPIO_6_28, /* MODE2 */
+ MX6Q_PAD_RGMII_RD3__GPIO_6_29, /* MODE3 */
+ MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24,
+};
+
+static int ksz9021rn_phy_fixup(struct phy_device *dev)
+{
+
+ phy_write(dev, 0x09, 0x1c00);
+ phy_write(dev, 0x4, 0x0000);
+ phy_write(dev, 0x5, 0x0000);
+ phy_write(dev, 0x6, 0x0000);
+ phy_write(dev, 0x8, 0x03ff);
+
+ /* do same as linux kernel */
+ /* min rx data delay */
+ phy_write(dev, 0x0b, 0x8105);
+ phy_write(dev, 0x0c, 0x0000);
+
+ /* max rx/tx clock delay, min rx/tx control delay */
+ phy_write(dev, 0x0b, 0x8104);
+ phy_write(dev, 0x0c, 0xf0f0);
+ phy_write(dev, 0x0b, 0x104);
+
+ return 0;
+}
+
+static int udoo_ksz9021rn_setup(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(udoo_enet_gpio_pads_1,
+ ARRAY_SIZE(udoo_enet_gpio_pads_1));
+
+ gpio_direction_output( IMX_GPIO_NR( 2 , 31 ) , 1 ); /* Power on enet */
+
+ /* MODE strap-in pins: advertise all capabilities */
+ gpio_direction_output(185, 1); /* GPIO 6-25 */
+ gpio_direction_output(187, 1); /* GPIO 6-27 */
+ gpio_direction_output(188, 1); /* GPIO 6-28*/
+ gpio_direction_output(189, 1); /* GPIO 6-29 */
+
+ mdelay(10);
+
+ /* Enable 125 MHz clock output */
+ gpio_direction_output(184, 1); /* GPIO 6-24 */
+
+ mdelay( 100 );
+
+ gpio_free(IMX_GPIO_NR(6, 24));
+ gpio_free(IMX_GPIO_NR(6, 25));
+ gpio_free(IMX_GPIO_NR(6, 27));
+ gpio_free(IMX_GPIO_NR(6, 28));
+ gpio_free(IMX_GPIO_NR(6, 29));
+
+ mxc_iomux_v3_setup_multiple_pads(udoo_enet_gpio_pads_2, ARRAY_SIZE(udoo_enet_gpio_pads_2));
+
+ return 0;
+}
+/*
+ * Do this before the fec initializes but after our
+ * gpios are available.
+ */
+fs_initcall(udoo_ksz9021rn_setup);
+
+static void udoo_ehci_init(void)
+{
+ /* hub reset */
+ gpio_direction_output(204, 0);
+ udelay(2000);
+ gpio_set_value(204, 1);
+}
+
+static iomux_v3_cfg_t const wdog_pads[] = {
+ MX6Q_PAD_EIM_A24__GPIO_5_4 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6Q_PAD_EIM_D19__EPIT1_EPITO,
+};
+
+#define WDT_EN IMX_GPIO_NR(5, 4)
+#define WDT_TRG IMX_GPIO_NR(3, 19)
+static void setup_iomux_wdog(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
+ gpio_direction_output(WDT_TRG, 0);
+ gpio_direction_output(WDT_EN, 1);
+ gpio_direction_input(WDT_TRG);
+}
+
+static void udoo_epit_init( void )
+{
+
+ writel(0x0000000, 0x20D0000);
+ writel(0x142000F, 0x20D0000);
+ writel(0x10000, 0x20D0008);
+ writel(0x0, 0x20D000C);
+}
+
+static int udoo_devices_init(void)
+{
+ if (!of_machine_is_compatible("fsl,imx6q-udoo"))
+ return 0;
+
+ setup_iomux_wdog();
+ udoo_ehci_init();
+ udoo_epit_init();
+
+ armlinux_set_bootparams((void *)0x10000100);
+
+ return 0;
+}
+device_initcall(udoo_devices_init);
+
+static int udoo_coredevices_init(void)
+{
+ if (!of_machine_is_compatible("fsl,imx6q-udoo"))
+ return 0;
+
+ phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
+ ksz9021rn_phy_fixup);
+ return 0;
+}
+coredevice_initcall(udoo_coredevices_init);
+
+static int udoo_postcore_init(void)
+{
+ if (!of_machine_is_compatible("fsl,imx6q-udoo"))
+ return 0;
+
+ imx6_init_lowlevel();
+
+ barebox_set_hostname("udoo");
+
+ return 0;
+}
+postcore_initcall(udoo_postcore_init);
diff --git a/arch/arm/boards/udoo/env/config-board b/arch/arm/boards/udoo/env/config-board
new file mode 100644
index 0000000..4cabac6
--- /dev/null
+++ b/arch/arm/boards/udoo/env/config-board
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+# board defaults, do not change in running system. Change /env/config
+# instead
+
+global.linux.bootargs.base="console=ttymxc1,115200"
diff --git a/arch/arm/boards/udoo/flash-header-mx6-udoo.imxcfg b/arch/arm/boards/udoo/flash-header-mx6-udoo.imxcfg
new file mode 100644
index 0000000..b142f59
--- /dev/null
+++ b/arch/arm/boards/udoo/flash-header-mx6-udoo.imxcfg
@@ -0,0 +1,104 @@
+soc imx6
+loadaddr 0x20000000
+dcdofs 0x400
+
+
+/* MX6_IOM_DRAM_SDQS0 -> MX6_IOM_DRAM_SDQS7 */
+wm 32 0x020e05a8 0x00000030
+wm 32 0x020e05b0 0x00000030
+wm 32 0x020e0524 0x00000030
+wm 32 0x020e051c 0x00000030
+wm 32 0x020e0518 0x00000030
+wm 32 0x020e050c 0x00000030
+wm 32 0x020e05b8 0x00000030
+wm 32 0x020e05c0 0x00000030
+/********************************************/
+
+/* MX6_IOM_DRAM_DQM0 -> MX6_IOM_DRAM_DQM7 */
+wm 32 0x020e05ac 0x00020030
+wm 32 0x020e05b4 0x00020030
+wm 32 0x020e0528 0x00020030
+wm 32 0x020e0520 0x00020030
+wm 32 0x020e0514 0x00020030
+wm 32 0x020e0510 0x00020030
+wm 32 0x020e05bc 0x00020030
+wm 32 0x020e05c4 0x00020030
+/******************************************/
+
+wm 32 0x020e056c 0x00020030 /* MX6_IOM_DRAM_CAS */
+wm 32 0x020e0578 0x00020030 /* MX6_IOM_DRAM_RAS */
+wm 32 0x020e0588 0x00020030 /* MX6_IOM_DRAM_SDCLK_0 */
+wm 32 0x020e0594 0x00020030 /* MX6_IOM_DRAM_SDCLK_1 */
+wm 32 0x020e057c 0x00020030 /* MX6_IOM_DRAM_RESET */
+wm 32 0x020e0590 0x00003000
+wm 32 0x020e0598 0x00003000
+wm 32 0x020e058c 0x00000000
+wm 32 0x020e059c 0x00003030
+wm 32 0x020e05a0 0x00003030
+
+/* MX6_IOM_GRP_B0DS -> MX6_IOM_GRP_B7DS */
+wm 32 0x020e0784 0x00000030
+wm 32 0x020e0788 0x00000030
+wm 32 0x020e0794 0x00000030
+wm 32 0x020e079c 0x00000030
+wm 32 0x020e07a0 0x00000030
+wm 32 0x020e07a4 0x00000030
+wm 32 0x020e07a8 0x00000030
+wm 32 0x020e0748 0x00000030
+/***************************************/
+
+wm 32 0x020e074c 0x00000030 /* MX6_IOM_GRP_ADDDS */
+wm 32 0x020e0750 0x00020000
+wm 32 0x020e0758 0x00000000
+wm 32 0x020e0774 0x00020000
+wm 32 0x020e078c 0x00000030 /* MX6_IOM_GRP_CTLDS */
+wm 32 0x020e0798 0x000c0000
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+wm 32 0x021b481c 0x33333333
+wm 32 0x021b4820 0x33333333
+wm 32 0x021b4824 0x33333333
+wm 32 0x021b4828 0x33333333
+
+
+wm 32 0x021b0004 0x00020036
+wm 32 0x021b0008 0x09444040
+wm 32 0x021b000c 0x54597955
+wm 32 0x021b0010 0xFF328F64
+wm 32 0x021b0014 0x01FF00DB
+wm 32 0x021b0018 0x00001740
+wm 32 0x021b001c 0x00008000
+wm 32 0x021b002c 0x000026D2
+wm 32 0x021b0030 0x00591023
+wm 32 0x021b0040 0x00000027
+wm 32 0x021b0000 0x831A0000
+wm 32 0x021b001c 0x04088032
+wm 32 0x021b001c 0x00008033
+wm 32 0x021b001c 0x00048031
+wm 32 0x021b001c 0x09408030
+wm 32 0x021b001c 0x04008040
+wm 32 0x021b0800 0xA1380003
+wm 32 0x021b4800 0xA1380003
+wm 32 0x021b0020 0x00005800
+wm 32 0x021b0818 0x00011117
+wm 32 0x021b4818 0x00011117
+wm 32 0x021b083c 0x43510360
+wm 32 0x021b0840 0x0342033F
+wm 32 0x021b483c 0x033F033F
+wm 32 0x021b4840 0x03290266
+wm 32 0x021b0848 0x4B3E4141
+wm 32 0x021b4848 0x47413B4A
+wm 32 0x021b0850 0x42404843
+wm 32 0x021b4850 0x4C3F4C45
+wm 32 0x021b080c 0x00350035
+wm 32 0x021b0810 0x001F001F
+wm 32 0x021b480c 0x00010001
+wm 32 0x021b4810 0x00010001
+wm 32 0x021b08b8 0x00000800
+wm 32 0x021b48b8 0x00000800
+wm 32 0x021b0004 0x00025576
+wm 32 0x021b0404 0x00011006
+wm 32 0x021b001c 0x00000000
+
diff --git a/arch/arm/boards/udoo/lowlevel.c b/arch/arm/boards/udoo/lowlevel.c
new file mode 100644
index 0000000..68b261d
--- /dev/null
+++ b/arch/arm/boards/udoo/lowlevel.c
@@ -0,0 +1,17 @@
+#include <common.h>
+#include <sizes.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+
+extern char __dtb_imx6q_udoo_start[];
+
+ENTRY_FUNCTION(start_imx6_udoo, r0, r1, r2)
+{
+ uint32_t fdt;
+
+ arm_cpu_lowlevel_init();
+
+ fdt = (uint32_t)__dtb_imx6q_udoo_start - get_runtime_offset();
+
+ barebox_arm_entry(0x10000000, SZ_1G, fdt);
+}
diff --git a/arch/arm/configs/imx_v7_defconfig b/arch/arm/configs/imx_v7_defconfig
index 0f8b3ef..9634615 100644
--- a/arch/arm/configs/imx_v7_defconfig
+++ b/arch/arm/configs/imx_v7_defconfig
@@ -13,6 +13,7 @@ CONFIG_MACH_TQMA6X=y
CONFIG_MACH_SABRELITE=y
CONFIG_MACH_NITROGEN6X=y
CONFIG_MACH_SOLIDRUN_HUMMINGBOARD=y
+CONFIG_MACH_UDOO=y
CONFIG_IMX_IIM=y
CONFIG_IMX_IIM_FUSE_BLOW=y
CONFIG_IMX_OCOTP=y
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 07508e3..45b4b54 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -23,7 +23,8 @@ dtb-$(CONFIG_ARCH_IMX6) += imx6q-gk802.dtb \
imx6q-phytec-pbab01.dtb \
imx6dl-hummingboard.dtb \
imx6q-nitrogen6x.dtb \
- imx6dl-nitrogen6x.dtb
+ imx6dl-nitrogen6x.dtb \
+ imx6q-udoo.dtb
dtb-$(CONFIG_ARCH_MVEBU) += dove-cubox.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5_sockit.dtb \
socfpga_cyclone5_socrates.dtb
@@ -55,6 +56,7 @@ pbl-$(CONFIG_MACH_SOCFPGA_TERASIC_SOCKIT) += socfpga_cyclone5_sockit.dtb.o
pbl-$(CONFIG_MACH_SOLIDRUN_HUMMINGBOARD) += imx6dl-hummingboard.dtb.o
pbl-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o imx6dl-sabrelite.dtb.o
pbl-$(CONFIG_MACH_NITROGEN6X) += imx6q-nitrogen6x.dtb.o imx6dl-nitrogen6x.dtb.o
+pbl-$(CONFIG_MACH_UDOO) += imx6q-udoo.dtb.o
.SECONDARY: $(obj)/$(BUILTIN_DTB).dtb.S
.SECONDARY: $(patsubst %,$(obj)/%.S,$(dtb-y))
diff --git a/arch/arm/dts/imx6q-udoo.dts b/arch/arm/dts/imx6q-udoo.dts
new file mode 100644
index 0000000..a74048f
--- /dev/null
+++ b/arch/arm/dts/imx6q-udoo.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2014 Raphaël Poggi
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-udoo.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad UDOO Board";
+ compatible = "fsl,imx6q-udoo", "fsl,imx6q";
+};
+
diff --git a/arch/arm/dts/imx6qdl-udoo.dtsi b/arch/arm/dts/imx6qdl-udoo.dtsi
new file mode 100644
index 0000000..c705684
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-udoo.dtsi
@@ -0,0 +1,108 @@
+/*
+ * Copyright 2014 Raphaël Poggi
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ linux,stdout-path = &uart2;
+
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_2p5v: regulator at 0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator at 2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6q-udoo {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* SGTL5000 sys_mclk */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <MX6QDL_I2C1_PINGRP1>;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <MX6QDL_UART2_PINGRP1>;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_USDHC3_PINGRP_D4
+ >;
+ };
+
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ status = "okay";
+};
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5933f81..28d1990 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -37,6 +37,7 @@ config ARCH_TEXT_BASE
default 0x2fc00000 if MACH_TQMA6X
default 0x4fc00000 if MACH_PHYTEC_PFLA02
default 0x4fc00000 if MACH_DFI_FS700_M60
+ default 0x4fc00000 if MACH_UDOO
config ARCH_IMX_INTERNAL_BOOT
bool "support internal boot mode"
@@ -233,6 +234,10 @@ config MACH_SOLIDRUN_HUMMINGBOARD
bool "SolidRun Hummingboard"
select ARCH_IMX6
+config MACH_UDOO
+ bool "Freescale i.MX6 UDOO Board"
+ select ARCH_IMX6
+
endif
# ----------------------------------------------------------
diff --git a/images/Makefile.imx b/images/Makefile.imx
index 9aca871..e3b27b7 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -123,3 +123,8 @@ pblx-$(CONFIG_MACH_NITROGEN6X) += start_imx6dl_nitrogen6x_1g
CFG_start_imx6dl_nitrogen6x_1g.pblx.imximg = $(board)/boundarydevices-nitrogen6x/flash-header-nitrogen6x-1g.imxcfg
FILE_barebox-boundarydevices-imx6dl-nitrogen6x-1g.img = start_imx6dl_nitrogen6x_1g.pblx.imximg
image-$(CONFIG_MACH_NITROGEN6X) += barebox-boundarydevices-imx6dl-nitrogen6x-1g.img
+
+pblx-$(CONFIG_MACH_UDOO) += start_imx6_udoo
+CFG_start_imx6_udoo.pblx.imximg = $(board)/udoo/flash-header-mx6-udoo.imxcfg
+FILE_barebox-freescale-imx6q-udoo.img = start_imx6_udoo.pblx.imximg
+image-$(CONFIG_MACH_UDOO) += barebox-freescale-imx6q-udoo.img
--
1.8.3.2
More information about the barebox
mailing list