[PATCH 3/5] mtd: atmel_nand: retrieve ecc_mode from pdata

[Raphaël Poggi]

By retrieving the ecc_mode from pdata we can use the same code for device tree and
non device tree probing. Which was not possible before, because ecc_mode was arbitrarily set to
NAND_ECC_SOFT.

Signed-off-by: Raphaël Poggi <poggi.raph at gmail.com>
---
 drivers/mtd/nand/atmel_nand.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 3ec6450..780d266 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1157,7 +1157,7 @@ static int __init atmel_nand_probe(struct device_d *dev)
 		}
 	}
 
-	nand_chip->ecc.mode = NAND_ECC_SOFT;
+	nand_chip->ecc.mode = pdata->ecc_mode;
 
 	if (IS_ENABLED(CONFIG_NAND_ECC_HW) &&
 	    pdata->ecc_mode == NAND_ECC_HW) {
-- 
1.7.9.5