[PATCH 1/2] pinctrl: at91: add pinctrl driver
Raphaël Poggi
raphio98 at gmail.com
Mon Aug 4 11:37:35 PDT 2014
I have planned to add device tree support for the AT91 port.
So I port the pinctrl driver from linux to barebox to be able to use
the pinctrl in device tree, but maybe I made a mistake and there is
another solution.
Best Regards,
Raphaël
2014-08-04 20:26 GMT+02:00 Jean-Christophe PLAGNIOL-VILLARD
<plagnioj at jcrosoft.com>:
> why do we need it on barebox?
>
> this driver was design for dt-only in linux
>
> Best Regards,
> J.
> On Aug 1, 2014, at 9:24 PM, Raphaël Poggi <poggi.raph at gmail.com> wrote:
>
>> This driver is based on mach-at91/gpio.c and linux pinctrl driver.
>> The driver contains the gpio and pinctrl parts (like in linux) because the two parts
>> share some structures and logics.
>>
>> Signed-off-by: Raphaël Poggi <poggi.raph at gmail.com>
>> ---
>> drivers/pinctrl/Kconfig | 6 +
>> drivers/pinctrl/Makefile | 1 +
>> drivers/pinctrl/pinctrl-at91.c | 529 ++++++++++++++++++++++++++++++++++++++++
>> drivers/pinctrl/pinctrl-at91.h | 148 +++++++++++
>> 4 files changed, 684 insertions(+)
>> create mode 100644 drivers/pinctrl/pinctrl-at91.c
>> create mode 100644 drivers/pinctrl/pinctrl-at91.h
>>
>> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
>> index dffaa4e..ce55c7b 100644
>> --- a/drivers/pinctrl/Kconfig
>> +++ b/drivers/pinctrl/Kconfig
>> @@ -7,6 +7,12 @@ config PINCTRL
>> from the devicetree. Legacy drivers here may not need this core
>> support but instead provide their own SoC specific APIs
>>
>> +config PINCTRL_AT91
>> + select PINCTRL
>> + bool
>> + help
>> + The pinmux controller found on AT91 SoCs.
>> +
>> config PINCTRL_IMX_IOMUX_V1
>> select PINCTRL if OFDEVICE
>> bool
>> diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
>> index 566ba11..3ea8649 100644
>> --- a/drivers/pinctrl/Makefile
>> +++ b/drivers/pinctrl/Makefile
>> @@ -1,4 +1,5 @@
>> obj-$(CONFIG_PINCTRL) += pinctrl.o
>> +obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
>> obj-$(CONFIG_PINCTRL_IMX_IOMUX_V1) += imx-iomux-v1.o
>> obj-$(CONFIG_PINCTRL_IMX_IOMUX_V2) += imx-iomux-v2.o
>> obj-$(CONFIG_PINCTRL_IMX_IOMUX_V3) += imx-iomux-v3.o
>> diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
>> new file mode 100644
>> index 0000000..a92a898
>> --- /dev/null
>> +++ b/drivers/pinctrl/pinctrl-at91.c
>> @@ -0,0 +1,529 @@
>> +/*
>> + * Copyright (C) 2005 HP Labs
>> + * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
>> + * Copyright (C) 2014 Raphaël Poggi
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + */
>> +
>> +#include <common.h>
>> +#include <command.h>
>> +#include <complete.h>
>> +#include <linux/clk.h>
>> +#include <linux/err.h>
>> +#include <errno.h>
>> +#include <io.h>
>> +#include <gpio.h>
>> +#include <init.h>
>> +#include <driver.h>
>> +#include <getopt.h>
>> +
>> +#include <mach/at91_pio.h>
>> +
>> +#include <pinctrl.h>
>> +
>> +#include "pinctrl-at91.h"
>> +
>> +struct at91_pinctrl {
>> + struct pinctrl_device pctl;
>> + struct at91_pinctrl_mux_ops *ops;
>> +};
>> +
>> +struct at91_gpio_chip {
>> + struct gpio_chip chip;
>> + void __iomem *regbase; /* PIO bank virtual address */
>> + struct at91_pinctrl_mux_ops *ops; /* ops */
>> +};
>> +
>> +enum at91_mux {
>> + AT91_MUX_GPIO = 0,
>> + AT91_MUX_PERIPH_A = 1,
>> + AT91_MUX_PERIPH_B = 2,
>> + AT91_MUX_PERIPH_C = 3,
>> + AT91_MUX_PERIPH_D = 4,
>> +};
>> +
>> +#define MAX_GPIO_BANKS 5
>> +#define to_at91_pinctrl(c) container_of(c, struct at91_pinctrl, pctl);
>> +#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
>> +
>> +#define PULL_UP (1 << 0)
>> +#define MULTI_DRIVE (1 << 1)
>> +#define DEGLITCH (1 << 2)
>> +#define PULL_DOWN (1 << 3)
>> +#define DIS_SCHMIT (1 << 4)
>> +#define DEBOUNCE (1 << 16)
>> +#define DEBOUNCE_VAL_SHIFT 17
>> +#define DEBOUNCE_VAL (0x3fff << DEBOUNCE_VAL_SHIFT)
>> +
>> +static int gpio_banks = 0;
>> +
>> +static struct at91_gpio_chip gpio_chip[MAX_GPIO_BANKS];
>> +
>> +static inline void __iomem *pin_to_controller(struct at91_pinctrl *info, unsigned pin)
>> +{
>> + pin /= MAX_NB_GPIO_PER_BANK;
>> + if (likely(pin < gpio_banks))
>> + return gpio_chip[pin].regbase;
>> +
>> + return NULL;
>> +}
>> +
>> +/**
>> + * struct at91_pinctrl_mux_ops - describes an At91 mux ops group
>> + * on new IP with support for periph C and D the way to mux in
>> + * periph A and B has changed
>> + * So provide the right call back
>> + * if not present means the IP does not support it
>> + * @get_periph: return the periph mode configured
>> + * @mux_A_periph: mux as periph A
>> + * @mux_B_periph: mux as periph B
>> + * @mux_C_periph: mux as periph C
>> + * @mux_D_periph: mux as periph D
>> + * @set_deglitch: enable/disable deglitch
>> + * @set_debounce: enable/disable debounce
>> + * @set_pulldown: enable/disable pulldown
>> + * @disable_schmitt_trig: disable schmitt trigger
>> + */
>> +struct at91_pinctrl_mux_ops {
>> + enum at91_mux (*get_periph)(void __iomem *pio, unsigned mask);
>> + void (*mux_A_periph)(void __iomem *pio, unsigned mask);
>> + void (*mux_B_periph)(void __iomem *pio, unsigned mask);
>> + void (*mux_C_periph)(void __iomem *pio, unsigned mask);
>> + void (*mux_D_periph)(void __iomem *pio, unsigned mask);
>> + bool (*get_deglitch)(void __iomem *pio, unsigned pin);
>> + void (*set_deglitch)(void __iomem *pio, unsigned mask, bool in_on);
>> + bool (*get_debounce)(void __iomem *pio, unsigned pin, u32 *div);
>> + void (*set_debounce)(void __iomem *pio, unsigned mask, bool in_on, u32 div);
>> + bool (*get_pulldown)(void __iomem *pio, unsigned pin);
>> + void (*set_pulldown)(void __iomem *pio, unsigned mask, bool in_on);
>> + bool (*get_schmitt_trig)(void __iomem *pio, unsigned pin);
>> + void (*disable_schmitt_trig)(void __iomem *pio, unsigned mask);
>> +};
>> +
>> +static enum at91_mux at91_mux_pio3_get_periph(void __iomem *pio, unsigned mask)
>> +{
>> + unsigned select;
>> +
>> + if (__raw_readl(pio + PIO_PSR) & mask)
>> + return AT91_MUX_GPIO;
>> +
>> + select = !!(__raw_readl(pio + PIO_ABCDSR1) & mask);
>> + select |= (!!(__raw_readl(pio + PIO_ABCDSR2) & mask) << 1);
>> +
>> + return select + 1;
>> +}
>> +
>> +static enum at91_mux at91_mux_get_periph(void __iomem *pio, unsigned mask)
>> +{
>> + unsigned select;
>> +
>> + if (__raw_readl(pio + PIO_PSR) & mask)
>> + return AT91_MUX_GPIO;
>> +
>> + select = __raw_readl(pio + PIO_ABSR) & mask;
>> +
>> + return select + 1;
>> +}
>> +
>> +static bool at91_mux_get_deglitch(void __iomem *pio, unsigned pin)
>> +{
>> + return (__raw_readl(pio + PIO_IFSR) >> pin) & 0x1;
>> +}
>> +
>> +static bool at91_mux_pio3_get_debounce(void __iomem *pio, unsigned pin, u32 *div)
>> +{
>> + *div = __raw_readl(pio + PIO_SCDR);
>> +
>> + return (__raw_readl(pio + PIO_IFSCSR) >> pin) & 0x1;
>> +}
>> +
>> +static bool at91_mux_pio3_get_pulldown(void __iomem *pio, unsigned pin)
>> +{
>> + return (__raw_readl(pio + PIO_PPDSR) >> pin) & 0x1;
>> +}
>> +
>> +static bool at91_mux_pio3_get_schmitt_trig(void __iomem *pio, unsigned pin)
>> +{
>> + return (__raw_readl(pio + PIO_SCHMITT) >> pin) & 0x1;
>> +}
>> +
>> +static struct at91_pinctrl_mux_ops at91rm9200_ops = {
>> + .get_periph = at91_mux_get_periph,
>> + .mux_A_periph = at91_mux_set_A_periph,
>> + .mux_B_periph = at91_mux_set_B_periph,
>> + .get_deglitch = at91_mux_get_deglitch,
>> + .set_deglitch = at91_mux_set_deglitch,
>> +};
>> +
>> +static struct at91_pinctrl_mux_ops at91sam9x5_ops = {
>> + .get_periph = at91_mux_pio3_get_periph,
>> + .mux_A_periph = at91_mux_pio3_set_A_periph,
>> + .mux_B_periph = at91_mux_pio3_set_B_periph,
>> + .mux_C_periph = at91_mux_pio3_set_C_periph,
>> + .mux_D_periph = at91_mux_pio3_set_D_periph,
>> + .get_deglitch = at91_mux_get_deglitch,
>> + .set_deglitch = at91_mux_pio3_set_deglitch,
>> + .get_debounce = at91_mux_pio3_get_debounce,
>> + .set_debounce = at91_mux_pio3_set_debounce,
>> + .get_pulldown = at91_mux_pio3_get_pulldown,
>> + .set_pulldown = at91_mux_pio3_set_pulldown,
>> + .get_schmitt_trig = at91_mux_pio3_get_schmitt_trig,
>> + .disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig,
>> +};
>> +
>> +static int at91_mux_pin(struct at91_pinctrl *info, unsigned pin, enum at91_mux mux, int use_pullup)
>> +{
>> + void __iomem *pio = pin_to_controller(info, pin);
>> + unsigned mask = pin_to_mask(pin);
>> +
>> + if (!info)
>> + return -EINVAL;
>> +
>> + if (!pio)
>> + return -EINVAL;
>> +
>> + at91_mux_disable_interrupt(pio, mask);
>> +
>> + switch(mux) {
>> + case AT91_MUX_GPIO:
>> + at91_mux_gpio_enable(pio, mask);
>> + break;
>> + case AT91_MUX_PERIPH_A:
>> + info->ops->mux_A_periph(pio, mask);
>> + break;
>> + case AT91_MUX_PERIPH_B:
>> + info->ops->mux_B_periph(pio, mask);
>> + break;
>> + case AT91_MUX_PERIPH_C:
>> + if (!info->ops->mux_C_periph)
>> + return -EINVAL;
>> + info->ops->mux_C_periph(pio, mask);
>> + break;
>> + case AT91_MUX_PERIPH_D:
>> + if (!info->ops->mux_D_periph)
>> + return -EINVAL;
>> + info->ops->mux_D_periph(pio, mask);
>> + break;
>> + }
>> + if (mux)
>> + at91_mux_gpio_disable(pio, mask);
>> +
>> + if (use_pullup >= 0)
>> + at91_mux_set_pullup(pio, mask, use_pullup);
>> +
>> + return 0;
>> +}
>> +
>> +static struct of_device_id at91_pinctrl_dt_ids[] = {
>> + {
>> + .compatible = "atmel,at91rm9200-pinctrl",
>> + .data = (unsigned long)&at91rm9200_ops,
>> + }, {
>> + .compatible = "atmel,at91sam9x5-pinctrl",
>> + .data = (unsigned long)&at91sam9x5_ops,
>> + }, {
>> + /* sentinel */
>> + }
>> +};
>> +
>> +static struct at91_pinctrl_mux_ops *at91_pinctrl_get_driver_data(struct device_d *dev)
>> +{
>> + struct at91_pinctrl_mux_ops *ops_data = NULL;
>> + int rc;
>> +
>> + if (dev->device_node) {
>> + const struct of_device_id *match;
>> + match = of_match_node(at91_pinctrl_dt_ids, dev->device_node);
>> + if (!match)
>> + ops_data = NULL;
>> + else
>> + ops_data = (struct at91_pinctrl_mux_ops *)match->data;
>> + }
>> + else {
>> + rc = dev_get_drvdata(dev, (unsigned long *)&ops_data);
>> + if (rc)
>> + ops_data = NULL;
>> + }
>> +
>> + return ops_data;
>> +}
>> +
>> +static int at91_pinctrl_set_conf(struct at91_pinctrl *info, unsigned int pin_num, unsigned int mux, unsigned int conf)
>> +{
>> + unsigned int mask;
>> + void __iomem *pio;
>> +
>> + pio = pin_to_controller(info, pin_num);
>> + mask = pin_to_mask(pin_num);
>> +
>> + if (conf & PULL_UP && conf & PULL_DOWN)
>> + return -EINVAL;
>> +
>> + at91_mux_set_pullup(pio, mask, conf & PULL_UP);
>> + at91_mux_set_multidrive(pio, mask, conf & MULTI_DRIVE);
>> + if (info->ops->set_deglitch)
>> + info->ops->set_deglitch(pio, mask, conf & DEGLITCH);
>> + if (info->ops->set_debounce)
>> + info->ops->set_debounce(pio, mask, conf & DEBOUNCE,
>> + (conf & DEBOUNCE_VAL) >> DEBOUNCE_VAL_SHIFT);
>> + if (info->ops->set_pulldown)
>> + info->ops->set_pulldown(pio, mask, conf & PULL_DOWN);
>> + if (info->ops->disable_schmitt_trig && conf & DIS_SCHMIT)
>> + info->ops->disable_schmitt_trig(pio, mask);
>> +
>> + return 0;
>> +}
>> +
>> +static int at91_pinctrl_set_state(struct pinctrl_device *pdev, struct device_node *np)
>> +{
>> + struct at91_pinctrl *info;
>> + const __be32 *list;
>> + int i, size;
>> + int ret = 0;
>> + int bank_num, pin_num, mux, conf;
>> +
>> + info = to_at91_pinctrl(pdev);
>> +
>> + list = of_get_property(np, "atmel,pins", &size);
>> + size /= sizeof(*list);
>> +
>> + if (!size || size % 4) {
>> + dev_err(pdev->dev, "wrong pins number or pins and configs should be by 4\n");
>> + return -EINVAL;
>> + }
>> +
>> + for (i = 0; i < size; i += 4) {
>> + bank_num = be32_to_cpu(*list++);
>> + pin_num = be32_to_cpu(*list++);
>> + mux = be32_to_cpu(*list++);
>> + conf = be32_to_cpu(*list++);
>> +
>> + ret = at91_mux_pin(info, pin_num, mux, conf & PULL_UP);
>> + if (ret) {
>> + dev_err(pdev->dev, "failed to mux pin %d\n", pin_num);
>> + return ret;
>> + }
>> +
>> + ret = at91_pinctrl_set_conf(info, pin_num, mux, conf);
>> + if (ret) {
>> + dev_err(pdev->dev, "failed to set conf on pin %d\n", pin_num);
>> + return ret;
>> + }
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static struct pinctrl_ops at91_pinctrl_ops = {
>> + .set_state = at91_pinctrl_set_state,
>> +};
>> +
>> +static int at91_pinctrl_probe(struct device_d *dev)
>> +{
>> + struct at91_pinctrl *info;
>> + int ret;
>> +
>> + info = xzalloc(sizeof(struct at91_pinctrl));
>> +
>> + info->ops = at91_pinctrl_get_driver_data(dev);
>> + if (!info->ops) {
>> + dev_err(dev, "failed to retrieve driver data\n");
>> + return -ENODEV;
>> + }
>> +
>> + info->pctl.dev = dev;
>> + info->pctl.ops = &at91_pinctrl_ops;
>> +
>> + ret = pinctrl_register(&info->pctl);
>> + if (ret)
>> + return ret;
>> +
>> + dev_info(dev, "AT91 pinctrl registred\n");
>> +
>> + return 0;
>> +}
>> +
>> +static struct platform_device_id at91_pinctrl_ids[] = {
>> + {
>> + .name = "at91rm9200-pinctrl",
>> + .driver_data = (unsigned long)&at91rm9200_ops,
>> + }, {
>> + .name = "at91sam9x5-pinctrl",
>> + .driver_data = (unsigned long)&at91sam9x5_ops,
>> + }, {
>> + /* sentinel */
>> + },
>> +};
>> +
>> +static struct driver_d at91_pinctrl_driver = {
>> + .name = "pinctrl-at91",
>> + .probe = at91_pinctrl_probe,
>> + .id_table = at91_pinctrl_ids,
>> + .of_compatible = DRV_OF_COMPAT(at91_pinctrl_dt_ids),
>> +};
>> +
>> +static int at91_pinctrl_init(void)
>> +{
>> + return platform_driver_register(&at91_pinctrl_driver);
>> +}
>> +coredevice_initcall(at91_pinctrl_init);
>> +
>> +static int at91_gpio_get(struct gpio_chip *chip, unsigned offset)
>> +{
>> + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
>> + void __iomem *pio = at91_gpio->regbase;
>> + unsigned mask = 1 << offset;
>> +
>> + return at91_mux_gpio_get(pio, mask);
>> +}
>> +
>> +static void at91_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
>> +{
>> + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
>> + void __iomem *pio = at91_gpio->regbase;
>> + unsigned mask = 1 << offset;
>> +
>> + at91_mux_gpio_set(pio, mask, value);
>> +}
>> +
>> +static int at91_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
>> + int value)
>> +{
>> + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
>> + void __iomem *pio = at91_gpio->regbase;
>> + unsigned mask = 1 << offset;
>> +
>> + at91_mux_gpio_set(pio, mask, value);
>> + __raw_writel(mask, pio + PIO_OER);
>> +
>> + return 0;
>> +}
>> +
>> +static int at91_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
>> +{
>> + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
>> + void __iomem *pio = at91_gpio->regbase;
>> + unsigned mask = 1 << offset;
>> +
>> + __raw_writel(mask, pio + PIO_ODR);
>> +
>> + return 0;
>> +}
>> +
>> +static int at91_gpio_request(struct gpio_chip *chip, unsigned offset)
>> +{
>> + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
>> + void __iomem *pio = at91_gpio->regbase;
>> + unsigned mask = 1 << offset;
>> +
>> + dev_dbg(chip->dev, "%s:%d pio%c%d(%d)\n", __func__, __LINE__,
>> + 'A' + pin_to_bank(chip->base), offset, chip->base + offset);
>> + at91_mux_gpio_enable(pio, mask);
>> +
>> + return 0;
>> +}
>> +
>> +static void at91_gpio_free(struct gpio_chip *chip, unsigned offset)
>> +{
>> + dev_dbg(chip->dev, "%s:%d pio%c%d(%d)\n", __func__, __LINE__,
>> + 'A' + pin_to_bank(chip->base), offset, chip->base + offset);
>> +}
>> +
>> +static struct gpio_ops at91_gpio_ops = {
>> + .request = at91_gpio_request,
>> + .free = at91_gpio_free,
>> + .direction_input = at91_gpio_direction_input,
>> + .direction_output = at91_gpio_direction_output,
>> + .get = at91_gpio_get,
>> + .set = at91_gpio_set,
>> +};
>> +
>> +static struct of_device_id at91_gpio_dt_ids[] = {
>> + {
>> + .compatible = "atmel,at91rm9200-gpio",
>> + }, {
>> + .compatible = "atmel,at91sam9x5-gpio",
>> + }, {
>> + /* sentinel */
>> + },
>> +};
>> +
>> +static int at91_gpio_probe(struct device_d *dev)
>> +{
>> + struct at91_gpio_chip *at91_gpio;
>> + struct clk *clk;
>> + int ret;
>> + int alias_idx = of_alias_get_id(dev->device_node, "gpio");
>> +
>> + BUG_ON(dev->id > MAX_GPIO_BANKS);
>> +
>> + at91_gpio = &gpio_chip[alias_idx];
>> +
>> + clk = clk_get(dev, NULL);
>> + if (IS_ERR(clk)) {
>> + ret = PTR_ERR(clk);
>> + dev_err(dev, "clock not found: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = clk_enable(clk);
>> + if (ret < 0) {
>> + dev_err(dev, "clock failed to enable: %d\n", ret);
>> + clk_put(clk);
>> + return ret;
>> + }
>> +
>> + gpio_banks = max(gpio_banks, alias_idx + 1);
>> + at91_gpio->regbase = dev_request_mem_region(dev, 0);
>> +
>> + at91_gpio->chip.ops = &at91_gpio_ops;
>> + at91_gpio->chip.ngpio = MAX_NB_GPIO_PER_BANK;
>> + at91_gpio->chip.dev = dev;
>> + at91_gpio->chip.base = dev->id * MAX_NB_GPIO_PER_BANK;
>> +
>> + ret = gpiochip_add(&at91_gpio->chip);
>> + if (ret) {
>> + dev_err(dev, "couldn't add gpiochip, ret = %d\n", ret);
>> + return ret;
>> + }
>> +
>> + dev_info(dev, "AT91 gpio driver registred\n");
>> +
>> + return 0;
>> +}
>> +
>> +static struct platform_device_id at91_gpio_ids[] = {
>> + {
>> + .name = "at91rm9200-gpio",
>> + }, {
>> + .name = "at91sam9x5-gpio",
>> + }, {
>> + /* sentinel */
>> + },
>> +};
>> +
>> +static struct driver_d at91_gpio_driver = {
>> + .name = "gpio-at91",
>> + .probe = at91_gpio_probe,
>> + .id_table = at91_gpio_ids,
>> + .of_compatible = DRV_OF_COMPAT(at91_gpio_dt_ids),
>> +};
>> +
>> +static int at91_gpio_init(void)
>> +{
>> + return platform_driver_register(&at91_gpio_driver);
>> +}
>> +coredevice_initcall(at91_gpio_init);
>> diff --git a/drivers/pinctrl/pinctrl-at91.h b/drivers/pinctrl/pinctrl-at91.h
>> new file mode 100644
>> index 0000000..e719fb8
>> --- /dev/null
>> +++ b/drivers/pinctrl/pinctrl-at91.h
>> @@ -0,0 +1,148 @@
>> +/*
>> + * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
>> + *
>> + * Under GPLv2 only
>> + */
>> +
>> +#ifndef __AT91_GPIO_H__
>> +#define __AT91_GPIO_H__
>> +
>> +#ifndef __gpio_init
>> +#define __gpio_init
>> +#endif
>> +
>> +#define MAX_NB_GPIO_PER_BANK 32
>> +
>> +static inline unsigned pin_to_bank(unsigned pin)
>> +{
>> + return pin / MAX_NB_GPIO_PER_BANK;
>> +}
>> +
>> +static inline unsigned pin_to_bank_offset(unsigned pin)
>> +{
>> + return pin % MAX_NB_GPIO_PER_BANK;
>> +}
>> +
>> +static inline unsigned pin_to_mask(unsigned pin)
>> +{
>> + return 1 << pin_to_bank_offset(pin);
>> +}
>> +
>> +static inline void at91_mux_disable_interrupt(void __iomem *pio, unsigned mask)
>> +{
>> + __raw_writel(mask, pio + PIO_IDR);
>> +}
>> +
>> +static inline void at91_mux_set_pullup(void __iomem *pio, unsigned mask, bool on)
>> +{
>> + __raw_writel(mask, pio + (on ? PIO_PUER : PIO_PUDR));
>> +}
>> +
>> +static inline void at91_mux_set_multidrive(void __iomem *pio, unsigned mask, bool on)
>> +{
>> + __raw_writel(mask, pio + (on ? PIO_MDER : PIO_MDDR));
>> +}
>> +
>> +static inline void at91_mux_set_A_periph(void __iomem *pio, unsigned mask)
>> +{
>> + __raw_writel(mask, pio + PIO_ASR);
>> +}
>> +
>> +static inline void at91_mux_set_B_periph(void __iomem *pio, unsigned mask)
>> +{
>> + __raw_writel(mask, pio + PIO_BSR);
>> +}
>> +
>> +static inline void at91_mux_pio3_set_A_periph(void __iomem *pio, unsigned mask)
>> +{
>> +
>> + __raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask,
>> + pio + PIO_ABCDSR1);
>> + __raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask,
>> + pio + PIO_ABCDSR2);
>> +}
>> +
>> +static inline void at91_mux_pio3_set_B_periph(void __iomem *pio, unsigned mask)
>> +{
>> + __raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask,
>> + pio + PIO_ABCDSR1);
>> + __raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask,
>> + pio + PIO_ABCDSR2);
>> +}
>> +
>> +static inline void at91_mux_pio3_set_C_periph(void __iomem *pio, unsigned mask)
>> +{
>> + __raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask, pio + PIO_ABCDSR1);
>> + __raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
>> +}
>> +
>> +static inline void at91_mux_pio3_set_D_periph(void __iomem *pio, unsigned mask)
>> +{
>> + __raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask, pio + PIO_ABCDSR1);
>> + __raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
>> +}
>> +
>> +static inline void at91_mux_set_deglitch(void __iomem *pio, unsigned mask, bool is_on)
>> +{
>> + __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
>> +}
>> +
>> +static inline void at91_mux_pio3_set_deglitch(void __iomem *pio, unsigned mask, bool is_on)
>> +{
>> + if (is_on)
>> + __raw_writel(mask, pio + PIO_IFSCDR);
>> + at91_mux_set_deglitch(pio, mask, is_on);
>> +}
>> +
>> +static inline void at91_mux_pio3_set_debounce(void __iomem *pio, unsigned mask,
>> + bool is_on, u32 div)
>> +{
>> + if (is_on) {
>> + __raw_writel(mask, pio + PIO_IFSCER);
>> + __raw_writel(div & PIO_SCDR_DIV, pio + PIO_SCDR);
>> + __raw_writel(mask, pio + PIO_IFER);
>> + } else {
>> + __raw_writel(mask, pio + PIO_IFDR);
>> + }
>> +}
>> +
>> +static inline void at91_mux_pio3_set_pulldown(void __iomem *pio, unsigned mask, bool is_on)
>> +{
>> + __raw_writel(mask, pio + (is_on ? PIO_PPDER : PIO_PPDDR));
>> +}
>> +
>> +static inline void at91_mux_pio3_disable_schmitt_trig(void __iomem *pio, unsigned mask)
>> +{
>> + __raw_writel(__raw_readl(pio + PIO_SCHMITT) | mask, pio + PIO_SCHMITT);
>> +}
>> +
>> +static inline void at91_mux_gpio_disable(void __iomem *pio, unsigned mask)
>> +{
>> + __raw_writel(mask, pio + PIO_PDR);
>> +}
>> +
>> +static inline void at91_mux_gpio_enable(void __iomem *pio, unsigned mask)
>> +{
>> + __raw_writel(mask, pio + PIO_PER);
>> +}
>> +
>> +static inline void at91_mux_gpio_input(void __iomem *pio, unsigned mask, bool input)
>> +{
>> + __raw_writel(mask, pio + (input ? PIO_ODR : PIO_OER));
>> +}
>> +
>> +static inline void at91_mux_gpio_set(void __iomem *pio, unsigned mask,
>> +int value)
>> +{
>> + __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
>> +}
>> +
>> +static inline int at91_mux_gpio_get(void __iomem *pio, unsigned mask)
>> +{
>> + u32 pdsr;
>> +
>> + pdsr = __raw_readl(pio + PIO_PDSR);
>> + return (pdsr & mask) != 0;
>> +}
>> +
>> +#endif /* __AT91_GPIO_H__ */
>> --
>> 1.7.9.5
>>
>>
>> _______________________________________________
>> barebox mailing list
>> barebox at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/barebox
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
More information about the barebox
mailing list