[PATCH 3/5] board: atmel: initialise the has_pmecc member

[Raphaël Poggi]

---
 arch/arm/boards/at91sam9n12ek/init.c    |    1 +
 arch/arm/boards/at91sam9x5ek/init.c     |    1 +
 arch/arm/boards/sama5d3_xplained/init.c |    1 +
 arch/arm/boards/sama5d3xek/init.c       |    1 +
 4 files changed, 4 insertions(+)

diff --git a/arch/arm/boards/at91sam9n12ek/init.c b/arch/arm/boards/at91sam9n12ek/init.c
index a206d6b..818a598 100644
--- a/arch/arm/boards/at91sam9n12ek/init.c
+++ b/arch/arm/boards/at91sam9n12ek/init.c
@@ -47,6 +47,7 @@ static struct atmel_nand_data nand_pdata = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PD5,
 	.enable_pin	= AT91_PIN_PD4,
+	.has_pmecc	= 1,
 	.ecc_mode	= NAND_ECC_HW,
 	.pmecc_sector_size = 512,
 	.pmecc_corr_cap = 2,
diff --git a/arch/arm/boards/at91sam9x5ek/init.c b/arch/arm/boards/at91sam9x5ek/init.c
index 62e5652..183ddc7 100644
--- a/arch/arm/boards/at91sam9x5ek/init.c
+++ b/arch/arm/boards/at91sam9x5ek/init.c
@@ -57,6 +57,7 @@ static struct atmel_nand_data nand_pdata = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PD5,
 	.enable_pin	= AT91_PIN_PD4,
+	.has_pmecc	= 1,
 	.ecc_mode	= NAND_ECC_HW,
 	.pmecc_sector_size = 512,
 	.pmecc_corr_cap = 2,
diff --git a/arch/arm/boards/sama5d3_xplained/init.c b/arch/arm/boards/sama5d3_xplained/init.c
index ae18863..b182802 100644
--- a/arch/arm/boards/sama5d3_xplained/init.c
+++ b/arch/arm/boards/sama5d3_xplained/init.c
@@ -48,6 +48,7 @@ static struct atmel_nand_data nand_pdata = {
 	.rdy_pin	= -EINVAL,
 	.enable_pin	= -EINVAL,
 	.ecc_mode	= NAND_ECC_HW,
+	.has_pmecc	= 1,
 	.pmecc_sector_size = 512,
 	.pmecc_corr_cap = 4,
 #if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
diff --git a/arch/arm/boards/sama5d3xek/init.c b/arch/arm/boards/sama5d3xek/init.c
index 743197f..49d2b37 100644
--- a/arch/arm/boards/sama5d3xek/init.c
+++ b/arch/arm/boards/sama5d3xek/init.c
@@ -63,6 +63,7 @@ static struct atmel_nand_data nand_pdata = {
 	.rdy_pin	= -EINVAL,
 	.enable_pin	= -EINVAL,
 	.ecc_mode	= NAND_ECC_HW,
+	.has_pmecc	= 1,
 	.pmecc_sector_size = 512,
 	.pmecc_corr_cap = 4,
 #if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-- 
1.7.9.5