[PATCHv2 2/3] x86: Add support for IDE on the legacy I/O ports
michel at reverze.net
michel at reverze.net
Fri Apr 4 11:09:46 PDT 2014
From: Michel Stam <m.stam at fugro.nl>
---
arch/x86/boards/x86_generic/generic_pc.c | 73 +++++++++++++++++++++++
drivers/ata/ide-sff.c | 94 ++++++++++++++++++++++++-----
drivers/ata/intf_platform_ide.c | 33 +++++++++-
include/ata_drive.h | 1 +
4 files changed, 180 insertions(+), 21 deletions(-)
diff --git a/arch/x86/boards/x86_generic/generic_pc.c b/arch/x86/boards/x86_generic/generic_pc.c
index 74a7224..895b88d 100644
--- a/arch/x86/boards/x86_generic/generic_pc.c
+++ b/arch/x86/boards/x86_generic/generic_pc.c
@@ -27,6 +27,10 @@
#include <ns16550.h>
#include <linux/err.h>
+#ifdef CONFIG_DISK_INTF_PLATFORM_IDE
+#include <platform_ide.h>
+#endif
+
/*
* These datas are from the MBR, created by the linker and filled by the
* setup tool while installing barebox on the disk drive
@@ -41,17 +45,85 @@ extern uint8_t pers_env_drive;
*/
#define PATCH_AREA_PERS_SIZE_UNUSED 0x000
+#ifdef CONFIG_DISK_INTF_PLATFORM_IDE
+
+static struct ide_port_info ide_plat = {
+ .ioport_shift = 0,
+ .dataif_be = 0,
+};
+
+static struct resource primary_ide_resources[] = {
+ {
+ .name = "base",
+ .start = 0x1f0,
+ .end = 0x1f7,
+ .flags = IORESOURCE_IO
+ },
+ {
+ .name = "alt",
+ .start = 0x3f6,
+ .end = 0x3f7,
+ .flags = IORESOURCE_IO
+ }
+};
+
+static struct resource secondary_ide_resources[] = {
+ {
+ .name = "base",
+ .start = 0x170,
+ .end = 0x177,
+ .flags = IORESOURCE_IO
+ },
+};
+
+static struct device_d primary_ide_device = {
+ .name = "ide_intf",
+ .id = 0,
+ .platform_data = &ide_plat,
+ .resource = primary_ide_resources,
+ .num_resources = ARRAY_SIZE( primary_ide_resources ),
+};
+
+static struct device_d secondary_ide_device = {
+ .name = "ide_intf",
+ .id = 1,
+ .platform_data = &ide_plat,
+ .resource = secondary_ide_resources,
+ .num_resources = ARRAY_SIZE( secondary_ide_resources ),
+};
+
+#endif /* CONFIG_DISK_INTF_PLATFORM_IDE */
+
static int devices_init(void)
{
+#ifdef CONFIG_DISK_INTF_PLATFORM_IDE
struct cdev *cdev;
+#endif
/* extended memory only */
add_mem_device("ram0", 0x0, bios_get_memsize() << 10,
IORESOURCE_MEM_WRITEABLE);
+#ifdef CONFIG_DISK_BIOS
add_generic_device("biosdrive", DEVICE_ID_DYNAMIC, NULL, 0, 0, IORESOURCE_MEM,
NULL);
+#endif
+
+#ifdef CONFIG_DISK_INTF_PLATFORM_IDE
+ platform_device_register( &primary_ide_device );
+ platform_device_register( &secondary_ide_device );
if (pers_env_size != PATCH_AREA_PERS_SIZE_UNUSED) {
+ cdev = devfs_add_partition("ata0",
+ pers_env_storage * 512,
+ (unsigned)pers_env_size * 512,
+ DEVFS_PARTITION_FIXED, "env0");
+ printf("Partition: %ld\n", IS_ERR(cdev) ? PTR_ERR(cdev) : 0);
+ } else
+ printf("No persistent storage defined\n");
+#endif /* CONFIG_DISK_INTF_PLATFORM_IDE */
+
+#ifdef CONFIG_DISK_BIOS
+ if (pers_env_size != PATCH_AREA_PERS_SIZE_UNUSED) {
cdev = devfs_add_partition("biosdisk0",
pers_env_storage * 512,
(unsigned)pers_env_size * 512,
@@ -59,6 +131,7 @@ static int devices_init(void)
printf("Partition: %ld\n", IS_ERR(cdev) ? PTR_ERR(cdev) : 0);
} else
printf("No persistent storage defined\n");
+#endif
return 0;
}
diff --git a/drivers/ata/ide-sff.c b/drivers/ata/ide-sff.c
index 3d5932e..f3a5cbd 100644
--- a/drivers/ata/ide-sff.c
+++ b/drivers/ata/ide-sff.c
@@ -15,13 +15,71 @@
#define DISK_SLAVE 1
/**
+ * Read a byte from the ATA controller
+ * @param ide IDE port structure
+ * @param addr Register adress
+ * @return Register's content
+ */
+static inline uint8_t ata_rd_byte(struct ide_port *ide, void __iomem *addr )
+{
+ if (ide->io.mmio)
+ return readb(addr);
+ else
+ return (uint8_t) inb((int) addr);
+}
+
+/**
+ * Write a byte to the ATA controller
+ * @param ide IDE port structure
+ * @param value Value to write
+ * @param addr Register adress
+ * @return Register's content
+ */
+static inline void ata_wr_byte(struct ide_port *ide, uint8_t value, void __iomem *addr )
+{
+ if (ide->io.mmio)
+ writeb(value, addr);
+ else
+ outb(value, (int) addr);
+}
+
+/**
+ * Read a word from the ATA controller
+ * @param ide IDE port structure
+ * @param addr Register adress
+ * @return Register's content
+ */
+static inline uint16_t ata_rd_word(struct ide_port *ide, void __iomem *addr )
+{
+ if (ide->io.mmio)
+ return readw(addr);
+ else
+ return (uint16_t) inw((int) addr);
+}
+
+/**
+ * Write a word to the ATA controller
+ * @param ide IDE port structure
+ * @param value Value to write
+ * @param addr Register adress
+ * @return Register's content
+ */
+static inline void ata_wr_word(struct ide_port *ide, uint16_t value, void __iomem *addr )
+{
+ if (ide->io.mmio)
+ writew(value, addr);
+ else
+ outw(value, (int) addr);
+}
+
+/**
* Read the status register of the ATA drive
* @param io Register file
* @return Register's content
*/
static uint8_t ata_rd_status(struct ide_port *ide)
{
- return readb(ide->io.status_addr);
+ return ata_rd_byte(ide,ide->io.status_addr);
}
/**
@@ -83,12 +141,12 @@ static int ata_set_lba_sector(struct ide_port *ide, unsigned drive, uint64_t num
if (num > 0x0FFFFFFF || drive > 1)
return -EINVAL;
- writeb(0xA0 | LBA_FLAG | drive << 4 | num >> 24, ide->io.device_addr);
- writeb(0x00, ide->io.error_addr);
- writeb(0x01, ide->io.nsect_addr);
- writeb(num, ide->io.lbal_addr); /* 0 ... 7 */
- writeb(num >> 8, ide->io.lbam_addr); /* 8 ... 15 */
- writeb(num >> 16, ide->io.lbah_addr); /* 16 ... 23 */
+ ata_wr_byte(ide, 0xA0 | LBA_FLAG | drive << 4 | num >> 24, ide->io.device_addr);
+ ata_wr_byte(ide, 0x00, ide->io.error_addr);
+ ata_wr_byte(ide, 0x01, ide->io.nsect_addr);
+ ata_wr_byte(ide, num, ide->io.lbal_addr); /* 0 ... 7 */
+ ata_wr_byte(ide, num >> 8, ide->io.lbam_addr); /* 8 ... 15 */
+ ata_wr_byte(ide, num >> 16, ide->io.lbah_addr); /* 16 ... 23 */
return 0;
}
@@ -107,7 +165,7 @@ static int ata_wr_cmd(struct ide_port *ide, uint8_t cmd)
if (rc != 0)
return rc;
- writeb(cmd, ide->io.command_addr);
+ ata_wr_byte(ide, cmd, ide->io.command_addr);
return 0;
}
@@ -118,7 +176,7 @@ static int ata_wr_cmd(struct ide_port *ide, uint8_t cmd)
*/
static void ata_wr_dev_ctrl(struct ide_port *ide, uint8_t val)
{
- writeb(val, ide->io.ctl_addr);
+ ata_wr_byte(ide, val, ide->io.ctl_addr);
}
/**
@@ -133,10 +191,10 @@ static void ata_rd_sector(struct ide_port *ide, void *buf)
if (ide->io.dataif_be) {
for (; u > 0; u--)
- *b++ = be16_to_cpu(readw(ide->io.data_addr));
+ *b++ = be16_to_cpu(ata_rd_word(ide, ide->io.data_addr));
} else {
for (; u > 0; u--)
- *b++ = le16_to_cpu(readw(ide->io.data_addr));
+ *b++ = le16_to_cpu(ata_rd_word(ide, ide->io.data_addr));
}
}
@@ -152,10 +210,10 @@ static void ata_wr_sector(struct ide_port *ide, const void *buf)
if (ide->io.dataif_be) {
for (; u > 0; u--)
- writew(cpu_to_be16(*b++), ide->io.data_addr);
+ ata_wr_word(ide, cpu_to_be16(*b++), ide->io.data_addr);
} else {
for (; u > 0; u--)
- writew(cpu_to_le16(*b++), ide->io.data_addr);
+ ata_wr_word(ide, cpu_to_le16(*b++), ide->io.data_addr);
}
}
@@ -169,10 +227,10 @@ static int ide_read_id(struct ata_port *port, void *buf)
struct ide_port *ide = to_ata_drive_access(port);
int rc;
- writeb(0xA0, ide->io.device_addr); /* FIXME drive */
- writeb(0x00, ide->io.lbal_addr);
- writeb(0x00, ide->io.lbam_addr);
- writeb(0x00, ide->io.lbah_addr);
+ ata_wr_byte(ide, 0xA0, ide->io.device_addr); /* FIXME drive */
+ ata_wr_byte(ide, 0x00, ide->io.lbal_addr);
+ ata_wr_byte(ide, 0x00, ide->io.lbam_addr);
+ ata_wr_byte(ide, 0x00, ide->io.lbah_addr);
rc = ata_wr_cmd(ide, ATA_CMD_ID_ATA);
if (rc != 0)
@@ -327,6 +385,8 @@ int ide_port_register(struct ide_port *ide)
ide->port.ops = &ide_ops;
ret = ata_port_register(&ide->port);
+ if ( !ret )
+ ata_port_detect(&ide->port);
if (ret)
free(ide);
diff --git a/drivers/ata/intf_platform_ide.c b/drivers/ata/intf_platform_ide.c
index 8ae0f05..5ad4c3d 100644
--- a/drivers/ata/intf_platform_ide.c
+++ b/drivers/ata/intf_platform_ide.c
@@ -81,16 +81,43 @@ static int platform_ide_probe(struct device_d *dev)
int rc;
struct ide_port_info *pdata = dev->platform_data;
struct ide_port *ide;
+ struct resource *res;
void *reg_base, *alt_base;
+ int mmio;
if (pdata == NULL) {
dev_err(dev, "No platform data. Cannot continue\n");
return -EINVAL;
}
+ reg_base = NULL;
+ alt_base = NULL;
+ res = dev_get_resource(dev, IORESOURCE_MEM, 0);
+ mmio = (res != NULL);
+ if (res && (res = request_iomem_region(dev_name(dev),res->start,res->end)))
+ {
+ reg_base = (void __force __iomem*) res->start;
+ res = dev_get_resource(dev, IORESOURCE_MEM, 1);
+ if (res && (res = request_iomem_region(dev_name(dev),res->start,res->end)))
+ alt_base = (void __force __iomem*) res->start;
+ }
+ else
+ {
+ res = dev_get_resource(dev, IORESOURCE_IO, 0);
+ if (res && (res = request_ioport_region(dev_name(dev),res->start,res->end)))
+ {
+ reg_base = (void __force *) res->start;
+ res = dev_get_resource(dev, IORESOURCE_IO, 1);
+ if (res && (res = request_ioport_region(dev_name(dev),res->start,res->end)))
+ alt_base = (void __force *) res->start;
+ }
+ }
+ if (!reg_base)
+ return -ENODEV;
+
ide = xzalloc(sizeof(*ide));
- reg_base = dev_request_mem_region(dev, 0);
- alt_base = dev_request_mem_region(dev, 1);
+ ide->io.mmio = mmio;
+
platform_ide_setup_port(reg_base, alt_base, &ide->io, pdata->ioport_shift);
ide->io.reset = pdata->reset;
ide->io.dataif_be = pdata->dataif_be;
@@ -125,6 +152,4 @@ device_platform_driver(platform_ide_driver);
*
* This driver does not change any access timings due to the fact it has no idea
* how to do so. So, do not expect an impressive data throughput.
- *
- * @todo Support also the IO port access method, the x86 architecture is using
*/
diff --git a/include/ata_drive.h b/include/ata_drive.h
index 6d6cca4..44073cb 100644
--- a/include/ata_drive.h
+++ b/include/ata_drive.h
@@ -119,6 +119,7 @@ struct ata_ioports {
/* hard reset line handling */
void (*reset)(int); /* true: assert reset, false: de-assert reset */
int dataif_be; /* true if 16 bit data register is big endian */
+ int mmio; /* true if memory-mapped io */
};
struct ata_port;
--
1.7.1
More information about the barebox
mailing list