[PATCH 2/4] AT91: move have_intensity_bit into board setup

[Darren Garnier]

Signed-off-by: Darren Garnier <dgarnier at reinrag.net>
---
arch/arm/boards/at91sam9261ek/init.c     | 2 ++
arch/arm/mach-at91/at91sam9261_devices.c | 2 --
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boards/at91sam9261ek/init.c b/arch/arm/boards/at91sam9261ek/init.c
index 00fc745..b420a48 100644
--- a/arch/arm/boards/at91sam9261ek/init.c
+++ b/arch/arm/boards/at91sam9261ek/init.c
@@ -223,6 +223,8 @@ static void ek_add_device_lcdc(void)

	if (machine_is_at91sam9g10ek())
		ek_lcdc_data.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB;
+	else
+		ek_lcdc_data.has_intensity_bit = true;

	at91_add_device_lcdc(&ek_lcdc_data);
}
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index b522afb..ba52e56 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -218,8 +218,6 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_platform_data *data)
{
	BUG_ON(!data);

-	data->have_intensity_bit = true;
-
#if defined(CONFIG_FB_ATMEL_STN)
	at91_set_A_periph(AT91_PIN_PB0, 0);	/* LCDVSYNC */
	at91_set_A_periph(AT91_PIN_PB1, 0);	/* LCDHSYNC */
-- 
1.8.3.1