[PATCHv2 11/12] ARM OMAP: get barebox partion information from boardcode

Teresa Gámez t.gamez at phytec.de
Tue Jul 9 05:23:21 EDT 2013


The size and offset of the barebox partition in nand and spi nor flash
may vary on different boards. Make it possible to pass this information
over boardfile if needed.

Signed-off-by: Teresa Gámez <t.gamez at phytec.de>
---
 arch/arm/mach-omap/include/mach/generic.h |   16 ++++++++++++
 arch/arm/mach-omap/xload.c                |   38 +++++++++++++++++++++++-----
 2 files changed, 47 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-omap/include/mach/generic.h b/arch/arm/mach-omap/include/mach/generic.h
index 9c474e2..3314faf 100644
--- a/arch/arm/mach-omap/include/mach/generic.h
+++ b/arch/arm/mach-omap/include/mach/generic.h
@@ -33,6 +33,22 @@
 #define cpu_is_am33xx()		(0)
 #endif
 
+struct omap_barebox_part {
+	unsigned int nand_offset;
+	unsigned int nand_size;
+	unsigned int nor_offset;
+	unsigned int nor_size;
+};
+
+#ifdef CONFIG_SHELL_NONE
+int omap_set_barebox_part(struct omap_barebox_part *part);
+#else
+static inline int omap_set_barebox_part(struct omap_barebox_part *part)
+{
+	return 0;
+}
+#endif
+
 extern uint32_t omap_bootinfo[3];
 void omap_save_bootinfo(void);
 
diff --git a/arch/arm/mach-omap/xload.c b/arch/arm/mach-omap/xload.c
index 3dbdef5..76746e2 100644
--- a/arch/arm/mach-omap/xload.c
+++ b/arch/arm/mach-omap/xload.c
@@ -11,6 +11,15 @@
 #include <filetype.h>
 #include <mach/generic.h>
 
+struct omap_barebox_part *barebox_part;
+
+static struct omap_barebox_part default_part = {
+	.nand_offset = SZ_128K,
+	.nand_size = SZ_1M,
+	.nor_offset = SZ_128K,
+	.nor_size = SZ_1M,
+};
+
 static void *read_image_head(const char *name)
 {
 	void *header = xmalloc(ARM_HEAD_SIZE);
@@ -46,14 +55,15 @@ static unsigned int get_image_size(void *head)
 	return ret;
 }
 
-static void *omap_xload_boot_nand(int offset)
+static void *omap_xload_boot_nand(int offset, int part_size)
 {
 	int ret;
 	int size;
 	void *to, *header;
 	struct cdev *cdev;
 
-	devfs_add_partition("nand0", offset, SZ_1M, DEVFS_PARTITION_FIXED, "x");
+	devfs_add_partition("nand0", offset, part_size,
+					DEVFS_PARTITION_FIXED, "x");
 	dev_add_bb_dev("x", "bbx");
 
 	header = read_image_head("bbx");
@@ -105,14 +115,15 @@ static void *omap_xload_boot_mmc(void)
 	return buf;
 }
 
-static void *omap_xload_boot_spi(int offset)
+static void *omap_xload_boot_spi(int offset, int part_size)
 {
 	int ret;
 	int size;
 	void *to, *header;
 	struct cdev *cdev;
 
-	devfs_add_partition("m25p0", offset, SZ_1M, DEVFS_PARTITION_FIXED, "x");
+	devfs_add_partition("m25p0", offset, part_size,
+					DEVFS_PARTITION_FIXED, "x");
 
 	header = read_image_head("x");
 	if (header == NULL)
@@ -167,6 +178,9 @@ static __noreturn int omap_xload(void)
 	int (*func)(void *) = NULL;
 	uint32_t *arg;
 
+	if (!barebox_part)
+		barebox_part = &default_part;
+
 	switch (bootsource_get())
 	{
 	case BOOTSOURCE_MMC:
@@ -183,15 +197,18 @@ static __noreturn int omap_xload(void)
 		}
 	case BOOTSOURCE_NAND:
 		printf("booting from NAND\n");
-		func = omap_xload_boot_nand(SZ_128K);
+		func = omap_xload_boot_nand(barebox_part->nand_offset,
+					barebox_part->nand_size);
 		break;
 	case BOOTSOURCE_SPI:
 		printf("booting from SPI\n");
-		func = omap_xload_boot_spi(SZ_128K);
+		func = omap_xload_boot_spi(barebox_part->nor_offset,
+					barebox_part->nor_size);
 		break;
 	default:
 		printf("unknown boot source. Fall back to nand\n");
-		func = omap_xload_boot_nand(SZ_128K);
+		func = omap_xload_boot_nand(barebox_part->nand_offset,
+					barebox_part->nand_size);
 		break;
 	}
 
@@ -208,6 +225,13 @@ static __noreturn int omap_xload(void)
 	while (1);
 }
 
+int omap_set_barebox_part(struct omap_barebox_part *part)
+{
+	barebox_part = part;
+
+	return 0;
+}
+
 static int omap_set_xload(void)
 {
 	barebox_main = omap_xload;
-- 
1.7.0.4




More information about the barebox mailing list