[PATCH 2/2] mach-imx: iim: cosmetic changes to the code to make it easier to follow

Paul Fertser fercerpav at gmail.com
Wed Sep 28 05:16:58 EDT 2011


This brings consistency to the way variables are named and used
according to the Freescale documentation. Also, since user is
supplying row indicies, and not offsets, it's reasonable to amend the
error message accordingly.

Signed-off-by: Paul Fertser <fercerpav at gmail.com>
---
 arch/arm/mach-imx/iim.c |   20 ++++++++++----------
 1 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-imx/iim.c b/arch/arm/mach-imx/iim.c
index ca89710..85bcfdb 100644
--- a/arch/arm/mach-imx/iim.c
+++ b/arch/arm/mach-imx/iim.c
@@ -51,8 +51,8 @@ static int do_fuse_sense(void __iomem *reg_base, unsigned int bank,
 		return -EINVAL;
 	}
 
-	if (row > 0x3ff) {
-		printf("%s: invalid row offset\n", __func__);
+	if (row > 255) {
+		printf("%s: invalid row index\n", __func__);
 		return -EINVAL;
 	}
 
@@ -61,8 +61,8 @@ static int do_fuse_sense(void __iomem *reg_base, unsigned int bank,
 	writeb(0xfe, reg_base + IIM_ERR);
 
 	/* upper and lower address halves */
-	writeb((bank << 3) | (row >> 7), reg_base + IIM_UA);
-	writeb((row << 1) & 0xf8, reg_base + IIM_LA);
+	writeb((bank << 3) | (row >> 5), reg_base + IIM_UA);
+	writeb((row << 3) & 0xf8, reg_base + IIM_LA);
 
 	/* start fuse sensing */
 	writeb(0x08, reg_base + IIM_FCTL);
@@ -100,7 +100,7 @@ static ssize_t imx_iim_cdev_read(struct cdev *cdev, void *buf, size_t count,
 			int row_val;
 
 			row_val = do_fuse_sense(priv->base,
-				priv->bank, (offset + i) * 4);
+						priv->bank, offset + i);
 			if (row_val < 0)
 				return row_val;
 			((u8 *)buf)[i] = (u8)row_val;
@@ -125,8 +125,8 @@ static int do_fuse_blow(void __iomem *reg_base, unsigned int bank,
 		return -EINVAL;
 	}
 
-	if (row > 0x3ff) {
-		printf("%s: invalid row offset\n", __func__);
+	if (row > 255) {
+		printf("%s: invalid row index\n", __func__);
 		return -EINVAL;
 	}
 
@@ -138,14 +138,14 @@ static int do_fuse_blow(void __iomem *reg_base, unsigned int bank,
 	writeb(0xaa, reg_base + IIM_PREG_P);
 
 	/* upper half address register */
-	writeb((bank << 3) | (row >> 7), reg_base + IIM_UA);
+	writeb((bank << 3) | (row >> 5), reg_base + IIM_UA);
 
 	for (bit = 0; bit < 8; bit++) {
 		if (((value >> bit) & 1) == 0)
 			continue;
 
 		/* lower half address register */
-		writeb(((row << 1) | bit), reg_base + IIM_LA);
+		writeb(((row << 3) | bit), reg_base + IIM_LA);
 
 		/* start fuse programing */
 		writeb(0x71, reg_base + IIM_FCTL);
@@ -193,7 +193,7 @@ static ssize_t imx_iim_cdev_write(struct cdev *cdev, const void *buf, size_t cou
 			int ret;
 
 			ret = do_fuse_blow(priv->base, priv->bank,
-					(offset + i) * 4, ((u8 *)buf)[i]);
+					   offset + i, ((u8 *)buf)[i]);
 			if (ret < 0)
 				return ret;
 		}
-- 
1.7.3.4




More information about the barebox mailing list