lib/md5.o build problem

[Sascha Hauer]

On Mon, Oct 24, 2011 at 07:33:59PM +0400, Antony Pavlov wrote:
> Hi!
> 
> I can't build barebox with md5sum command.

Grumpf. Something went seriously wrong while merging Jean-Christophes
digest patch series. Sorry for this, it's my bad. I remerged this series
again and pushed it to a temporary branch here:

git://git.pengutronix.de/git/barebox.git digest-next

Jean-Christophe, can you have a look at it and see if it looks like
you originally intended?

Sascha

> 
> Here is the log:
> 
> $ date
> Mon Oct 24 19:29:51 MSD 2011
> $ git clone --branch next git://git.pengutronix.de/git/barebox.git
> barebox.git.next
> $ cd barebox.git.next
> $ make ARCH=arm versatilepb_defconfig
> $ sed "s/# CONFIG_CMD_MD5SUM.*/CONFIG_CMD_MD5SUM=y/" -i .config
> $ make ARCH=arm oldconfig
> $ make -j 2 ARCH=arm CROSS_COMPILE=arm-realview-linux-gnueabi-
> ...
>   CC      lib/show_progress.o
>   CC      lib/decompress_unlzo.o
> make[1]: *** No rule to make target `lib/md5.o', needed by
> `lib/built-in.o'.  Stop.
> make[1]: *** Waiting for unfinished jobs....
>   CC      lib/process_escape_sequence.o
> make: *** [lib] Error 2
> make: *** Waiting for unfinished jobs....
>   LD      fs/built-in.o
> 
> -- 
> Best regards,
>   Antony Pavlov
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |