[PATCH v3] omap: Unify run_shell() in xload configuration

Sanjeev Premi premi at ti.com
Wed Oct 12 07:03:50 EDT 2011


Currently, there are multiple definitions of run_shell()
for each board that can be build in "xload" configuration.
Now there is only one function used by all boards.

The functions defined in xload.c are used only when "xload"
configuration used; but it gets compiled unconditionally.
This has been fixed as well.

Signed-off-by: Sanjeev Premi <premi at ti.com>
---

 Change in v3:
    Added function omap_bootsrc() to replace the #ifdef
    around the switch-case.

 Change in v2:
    Fixed the typo in the subject s/iomap/omap/
    ...observed when mail reached my inbox :(

 Only build tested with these commands:
   make distclean ; make omap3530_beagle_defconfig ; make ;
   make distclean ; make omap3530_beagle_xload_defconfig ; make ;
   make distclean ; make panda_xload_defconfig ; make ;
   make distclean ; make panda_defconfig ; make ;
   make distclean ; make pcm049_defconfig ; make ;
   make distclean ; make pcm049_xload_defconfig ; make ;


 arch/arm/boards/omap/board-beagle.c |   31 --------------------------
 arch/arm/boards/panda/board.c       |   19 ----------------
 arch/arm/boards/pcm049/board.c      |   30 -------------------------
 arch/arm/mach-omap/Makefile         |    3 +-
 arch/arm/mach-omap/xload.c          |   41 +++++++++++++++++++++++++++++++++++
 5 files changed, 43 insertions(+), 81 deletions(-)

diff --git a/arch/arm/boards/omap/board-beagle.c b/arch/arm/boards/omap/board-beagle.c
index 4e7f179..bcebd5c 100644
--- a/arch/arm/boards/omap/board-beagle.c
+++ b/arch/arm/boards/omap/board-beagle.c
@@ -313,34 +313,3 @@ static int beagle_devices_init(void)
 	return 0;
 }
 device_initcall(beagle_devices_init);
-
-#ifdef CONFIG_SHELL_NONE
-
-int run_shell(void)
-{
-	int (*func)(void) = NULL;
-
-	switch (omap3_bootsrc()) {
-	case OMAP_BOOTSRC_MMC1:
-		printf("booting from MMC1\n");
-		func = omap_xload_boot_mmc();
-		break;
-	case OMAP_BOOTSRC_UNKNOWN:
-		printf("unknown boot source. Fall back to nand\n");
-	case OMAP_BOOTSRC_NAND:
-		printf("booting from NAND\n");
-		func = omap_xload_boot_nand(SZ_128K, SZ_256K);
-		break;
-	}
-
-	if (!func) {
-		printf("booting failed\n");
-		while (1);
-	}
-
-	shutdown_barebox();
-	func();
-
-	while (1);
-}
-#endif
diff --git a/arch/arm/boards/panda/board.c b/arch/arm/boards/panda/board.c
index 33ec144..cfc5bb9 100644
--- a/arch/arm/boards/panda/board.c
+++ b/arch/arm/boards/panda/board.c
@@ -170,22 +170,3 @@ static int panda_env_init(void)
 }
 late_initcall(panda_env_init);
 #endif
-
-
-#ifdef CONFIG_SHELL_NONE
-int run_shell(void)
-{
-	int (*func)(void);
-
-	func = omap_xload_boot_mmc();
-	if (!func) {
-		printf("booting failed\n");
-		while (1);
-	}
-
-	shutdown_barebox();
-	func();
-
-	while (1);
-}
-#endif
diff --git a/arch/arm/boards/pcm049/board.c b/arch/arm/boards/pcm049/board.c
index 3d02779..6814b59 100644
--- a/arch/arm/boards/pcm049/board.c
+++ b/arch/arm/boards/pcm049/board.c
@@ -112,33 +112,3 @@ static int pcm049_devices_init(void)
 	return 0;
 }
 device_initcall(pcm049_devices_init);
-
-#ifdef CONFIG_SHELL_NONE
-int run_shell(void)
-{
-	int (*func)(void) = NULL;
-
-	switch (omap4_bootsrc()) {
-	case OMAP_BOOTSRC_MMC1:
-		printf("booting from MMC1\n");
-		func = omap_xload_boot_mmc();
-		break;
-	case OMAP_BOOTSRC_UNKNOWN:
-		printf("unknown boot source. Fall back to nand\n");
-	case OMAP_BOOTSRC_NAND:
-		printf("booting from NAND\n");
-		func = omap_xload_boot_nand(SZ_128K, SZ_256K);
-		break;
-	}
-
-	if (!func) {
-		printf("booting failed\n");
-		while (1);
-	}
-
-	shutdown_barebox();
-	func();
-
-	while (1);
-}
-#endif
diff --git a/arch/arm/mach-omap/Makefile b/arch/arm/mach-omap/Makefile
index 7204746..07bf30a 100644
--- a/arch/arm/mach-omap/Makefile
+++ b/arch/arm/mach-omap/Makefile
@@ -25,4 +25,5 @@ obj-$(CONFIG_ARCH_OMAP3) += omap3_core.o omap3_generic.o
 obj-$(CONFIG_ARCH_OMAP4) += omap4_generic.o omap4_clock.o
 obj-$(CONFIG_OMAP3_CLOCK_CONFIG) += omap3_clock_core.o omap3_clock.o
 obj-$(CONFIG_OMAP_GPMC) += gpmc.o devices-gpmc-nand.o
-obj-y += gpio.o xload.o
+obj-$(CONFIG_SHELL_NONE) += xload.o
+obj-y += gpio.o
diff --git a/arch/arm/mach-omap/xload.c b/arch/arm/mach-omap/xload.c
index 216b9b5..a52a8ba 100644
--- a/arch/arm/mach-omap/xload.c
+++ b/arch/arm/mach-omap/xload.c
@@ -52,3 +52,44 @@ void *omap_xload_boot_mmc(void)
 
 	return buf;
 }
+
+enum omap_boot_src omap_bootsrc(void)
+{
+#if defined(CONFIG_ARCH_OMAP3)
+	return omap3_bootsrc();
+#elif defined(CONFIG_ARCH_OMAP4)
+	return omap4_bootsrc();
+#endif
+}
+
+/*
+ * Replaces the default shell in xload configuration
+ */
+int run_shell(void)
+{
+	int (*func)(void) = NULL;
+
+	switch (omap_bootsrc())
+	{
+	case OMAP_BOOTSRC_MMC1:
+		printf("booting from MMC1\n");
+		func = omap_xload_boot_mmc();
+		break;
+	case OMAP_BOOTSRC_UNKNOWN:
+		printf("unknown boot source. Fall back to nand\n");
+	case OMAP_BOOTSRC_NAND:
+		printf("booting from NAND\n");
+		func = omap_xload_boot_nand(SZ_128K, SZ_256K);
+		break;
+	}
+
+	if (!func) {
+		printf("booting failed\n");
+		while (1);
+	}
+
+	shutdown_barebox();
+	func();
+
+	while (1);
+}
-- 
1.7.0.4




More information about the barebox mailing list