[PATCH v2] omap: Unify run_shell() in xload configuration

Jean-Christophe PLAGNIOL-VILLARD plagnioj at jcrosoft.com
Tue Oct 11 16:30:11 EDT 2011


> -
> -	if (!func) {
> -		printf("booting failed\n");
> -		while (1);
> -	}
> -
> -	shutdown_barebox();
> -	func();
> -
> -	while (1);
> -}
> -#endif
> diff --git a/arch/arm/mach-omap/Makefile b/arch/arm/mach-omap/Makefile
> index 7204746..07bf30a 100644
> --- a/arch/arm/mach-omap/Makefile
> +++ b/arch/arm/mach-omap/Makefile
> @@ -25,4 +25,5 @@ obj-$(CONFIG_ARCH_OMAP3) += omap3_core.o omap3_generic.o
>  obj-$(CONFIG_ARCH_OMAP4) += omap4_generic.o omap4_clock.o
>  obj-$(CONFIG_OMAP3_CLOCK_CONFIG) += omap3_clock_core.o omap3_clock.o
>  obj-$(CONFIG_OMAP_GPMC) += gpmc.o devices-gpmc-nand.o
> -obj-y += gpio.o xload.o
> +obj-$(CONFIG_SHELL_NONE) += xload.o
> +obj-y += gpio.o
> diff --git a/arch/arm/mach-omap/xload.c b/arch/arm/mach-omap/xload.c
> index 216b9b5..ac859fa 100644
> --- a/arch/arm/mach-omap/xload.c
> +++ b/arch/arm/mach-omap/xload.c
> @@ -52,3 +52,39 @@ void *omap_xload_boot_mmc(void)
>  
>  	return buf;
>  }
> +
> +/*
> + * Replaces the default shell in xload configuration
> + */
> +int run_shell(void)
> +{
> +	int (*func)(void) = NULL;
> +
> +#if defined(CONFIG_ARCH_OMAP3)
> +	switch (omap3_bootsrc())
> +#elif  defined(CONFIG_ARCH_OMAP4)
> +	switch (omap4_bootsrc())
> +#endif
I really don't like this

please create a small local station like this to manage the OMAPx

static u32 omap_bootsrc(void)
{
#if defined(CONFIG_ARCH_OMAP3)
	return omap3_bootsrc())
#elif defined(CONFIG_ARCH_OMAP4)
	return omap4_bootsrc())
	switch (omap4_bootsrc())
#endif
}

and then
	switch (omap_bootsrc()) {


Best Regards,
J.



More information about the barebox mailing list