[PATCH] iomux-mx25: fix MDIO pin configuration

[Sascha Hauer]

On Wed, Aug 24, 2011 at 04:30:59PM +0400, Paul Fertser wrote:
> According to the datasheet, PUE is not effective without PKE set.
> 
> Signed-off-by: Paul Fertser <fercerpav at gmail.com>

Applied to master.

Sascha

> ---
>  arch/arm/mach-imx/include/mach/iomux-mx25.h |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/include/mach/iomux-mx25.h b/arch/arm/mach-imx/include/mach/iomux-mx25.h
> index e636c7f..ae29323 100644
> --- a/arch/arm/mach-imx/include/mach/iomux-mx25.h
> +++ b/arch/arm/mach-imx/include/mach/iomux-mx25.h
> @@ -425,7 +425,7 @@
>  #define MX25_PAD_FEC_MDC__AUD4_TXD	IOMUX_PAD(0x3c0, 0x1c8, 0x02, 0x464, 1, NO_PAD_CTRL)
>  #define MX25_PAD_FEC_MDC__GPIO_3_5	IOMUX_PAD(0x3c0, 0x1c8, 0x05, 0, 0, NO_PAD_CTRL)
>  
> -#define MX25_PAD_FEC_MDIO__FEC_MDIO	IOMUX_PAD(0x3c4, 0x1cc, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP | PAD_CTL_PUE)
> +#define MX25_PAD_FEC_MDIO__FEC_MDIO	IOMUX_PAD(0x3c4, 0x1cc, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP | PAD_CTL_PUE | PAD_CTL_PKE)
>  #define MX25_PAD_FEC_MDIO__AUD4_RXD	IOMUX_PAD(0x3c4, 0x1cc, 0x02, 0x460, 1, NO_PAD_CTRL)
>  #define MX25_PAD_FEC_MDIO__GPIO_3_6	IOMUX_PAD(0x3c4, 0x1cc, 0x05, 0, 0, NO_PAD_CTRL)
>  
> -- 
> 1.7.2.3
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |