at91sam9263ek, few issues

[Nataraj S Narayan]

Hi

Changed nand_chip_delay =50 from 20 in
./drivers/mtd/nand/atmel_nand.c, and presently getting:-

barebox at Atmel at91sam9263-ek:/ ubiattach /dev/nand0.root
UBI: attaching mtd0 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
registering /dev/ubi0
UBI: attached mtd0 to ubi0
UBI: MTD device name:            "nand0.root"
UBI: MTD device size:            254 MiB
UBI: number of good PEBs:        2028
UBI: number of bad PEBs:         5
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     0
UBI: available PEBs:             2004
UBI: total number of reserved PEBs: 24
UBI: number of PEBs reserved for bad PEB handling: 20
UBI: max/mean erase counter: 1/1

But further giving a

barebox at Atmel at91sam9263-ek:/ tftp rootfs1.ubif /dev/ubi0
TFTP from server 192.168.0.110 ('rootfs1.ubif' -> '/dev/ubi0')
        write: No space left on device

tftp failed: error -28

Btw , which is the irc channel of Barebox?

regards

Nataraj

On Fri, Aug 12, 2011 at 6:45 AM, Nataraj S Narayan <natarajsn at gmail.com> wrote:
> Hi
>
> The following is the gist of issues seen,  namely
>
>  1. unable to saveenv
>  2.  ubiattach issue.
>
> I am using NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung
> NAND 256MiB 3,3V 8-bit).
>
> Please help
>
> regards
>
> Nataraj
>
> barebox at Atmel at91sam9263-ek:/  eth0.serverip=192.168.0.110
> barebox at Atmel at91sam9263-ek:/ eth0.ipaddr=192.168.0.105
>
> barebox at Atmel at91sam9263-ek:/ saveenv
> saving environment
> could not open /dev/env0: Read-only file system
>
> barebox at Atmel at91sam9263-ek:/ printenv
> locals:
> ip=dhcp
> kernel_loc=tftp
> rootfs_loc=net
> rootfs_type=ubifs
> rootfsimage=root.ubifs
> kernelimage_type=uimage
> kernelimage=uImage
> nand_device=atmel_nand
> nand_parts=256k(barebox)ro,128k(bareboxenv),1536k(kernel),-(root)
> rootfs_mtdblock_nand=3
> autoboot_timeout=3
> bootargs=console=ttyS0,115200
> PS1=\e[1;32mbarebox@\e[1;31m\h:\w\e[0m
> globals:
> PATH=/env/bin
>
>
>
>
> barebox at Atmel at91sam9263-ek:/ ubiattach dev/nand0.root
> UBI: attaching mtd0 to ubi0
> UBI: physical eraseblock size:   131072 bytes (128 KiB)
> UBI: logical eraseblock size:    126976 bytes
> UBI: smallest flash I/O unit:    2048
> UBI: VID header offset:          2048 (aligned 2048)
> UBI: data offset:                4096
> UBI error: ubi_io_read: error -74 while reading 64 bytes from PEB 0:0,
> read 64 bytes
> UBI error: ubi_io_read: error -74 while reading 64 bytes from PEB
> 476:0, read 64 bytes
> UBI error: ubi_io_read: error -74 while reading 64 bytes from PEB
> 489:0, read 64 bytes
>