[RFC] add Tegra support to barebox

Antony Pavlov antonynpavlov at gmail.com
Thu Aug 11 02:12:01 EDT 2011


On 11 August 2011 00:24, Antony Pavlov <antonynpavlov at gmail.com> wrote:

> AFAIK tegra is not resemble to current arm machines, supported by barebox.
>
> For example, this is the comment from barebox tegra source code:

Sorry, of cause, this is a comment from __U-Boot__ tegra source code:

> /*
>  * Tegra2 uses 2 separate CPUs - the AVP (ARM7TDMI) and the CPU (dual A9s).
>  * U-Boot runs on the AVP first, setting things up for the CPU (PLLs,
>  * muxes, clocks, clamps, etc.). Then the AVP halts, and expects the CPU
>  * to pick up its reset vector, which points here.
>  */


-- 
Best regards,
  Antony Pavlov



More information about the barebox mailing list