Barebox working on freescale-mx25-3-stack?

Sascha Hauer s.hauer at
Tue Mar 23 10:26:43 EDT 2010

Hi Matthias,

On Tue, Mar 23, 2010 at 02:32:17PM +0100, Matthias Kaehlcke wrote:
> hi,
> i'm trying to run barebox on a Freescale i.MX25 3-Stack board. for
> this purpose i built barebox with the freescale-mx25-3-stack
> defconfig, using the toolchain provided by the Freescale BSP (i also
> tried it with a custom one). i then dumped the barebox.bin on a MMC
> card, plugged the card into the socket of the board and switched the
> board on, but nothing happened :(

I just checked, it works, but not with the current defconfig. Please
enable CONFIG_ARCH_IMX_INTERNAL_BOOT to boot from MMC. Note that
currently the CPLD is not initialised in barebox and so the FEC is not
working (It is working if barebox runs as a second stage loader after
Freescales redboot).


Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 |  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

More information about the barebox mailing list