Barebox working on freescale-mx25-3-stack?

[Eric Bénard]

Hi Matthias,

Le 23/03/2010 14:32, Matthias Kaehlcke a écrit :
> i'm trying to run barebox on a Freescale i.MX25 3-Stack board. for
> this purpose i built barebox with the freescale-mx25-3-stack
> defconfig, using the toolchain provided by the Freescale BSP (i also
> tried it with a custom one). i then dumped the barebox.bin on a MMC
> card, plugged the card into the socket of the board and switched the
> board on, but nothing happened :(
>
> booting u-boot or redboot from MMC succeeds, so the settings of SW21
> and SW22 shouldn't be the problem
>
> is barebox supposed to work on this board or is the port still in
> preliminary state?
>
you can check the patch I sent last friday, it works fine on our i.MX25 
board for NAND boot (MMC boot not tested yet).
I'll post an updated version of the patch in a few days as per Sascha's 
comments + a few tuning in the env.

Eric