[PATCH 3/6] at91: add Ronetix pm9261 board support
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Wed Aug 18 22:48:27 EDT 2010
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
arch/arm/Makefile | 1 +
arch/arm/boards/pm9261/Makefile | 1 +
arch/arm/boards/pm9261/config.h | 110 +++++++++
arch/arm/boards/pm9261/env/bin/_update | 36 +++
arch/arm/boards/pm9261/env/bin/boot | 47 ++++
arch/arm/boards/pm9261/env/bin/hush_hack | 1 +
arch/arm/boards/pm9261/env/bin/init | 38 +++
.../boards/pm9261/env/bin/update_barebox_xmodem | 26 ++
arch/arm/boards/pm9261/env/bin/update_kernel | 15 ++
arch/arm/boards/pm9261/env/bin/update_root | 16 ++
arch/arm/boards/pm9261/env/config | 28 +++
arch/arm/boards/pm9261/init.c | 169 +++++++++++++
arch/arm/configs/pm9261_defconfig | 250 ++++++++++++++++++++
arch/arm/mach-at91/Kconfig | 8 +
14 files changed, 746 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boards/pm9261/Makefile
create mode 100644 arch/arm/boards/pm9261/config.h
create mode 100644 arch/arm/boards/pm9261/env/bin/_update
create mode 100644 arch/arm/boards/pm9261/env/bin/boot
create mode 100644 arch/arm/boards/pm9261/env/bin/hush_hack
create mode 100644 arch/arm/boards/pm9261/env/bin/init
create mode 100644 arch/arm/boards/pm9261/env/bin/update_barebox_xmodem
create mode 100644 arch/arm/boards/pm9261/env/bin/update_kernel
create mode 100644 arch/arm/boards/pm9261/env/bin/update_root
create mode 100644 arch/arm/boards/pm9261/env/config
create mode 100644 arch/arm/boards/pm9261/init.c
create mode 100644 arch/arm/configs/pm9261_defconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 7d2a118..c1e488c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -78,6 +78,7 @@ board-$(CONFIG_MACH_PCA100) := phycard-i.MX27
board-$(CONFIG_MACH_PCM037) := pcm037
board-$(CONFIG_MACH_PCM038) := pcm038
board-$(CONFIG_MACH_PCM043) := pcm043
+board-$(CONFIG_MACH_PM9261) := pm9261
board-$(CONFIG_MACH_PM9263) := pm9263
board-$(CONFIG_MACH_SCB9328) := scb9328
board-$(CONFIG_MACH_NESO) := guf-neso
diff --git a/arch/arm/boards/pm9261/Makefile b/arch/arm/boards/pm9261/Makefile
new file mode 100644
index 0000000..eb072c0
--- /dev/null
+++ b/arch/arm/boards/pm9261/Makefile
@@ -0,0 +1 @@
+obj-y += init.o
diff --git a/arch/arm/boards/pm9261/config.h b/arch/arm/boards/pm9261/config.h
new file mode 100644
index 0000000..1c57448
--- /dev/null
+++ b/arch/arm/boards/pm9261/config.h
@@ -0,0 +1,110 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define AT91_MAIN_CLOCK 18432000 /* 16.367 MHz crystal */
+
+#define MASTER_PLL_DIV 15
+#define MASTER_PLL_MUL 162
+#define MAIN_PLL_DIV 2
+
+/* clocks */
+#define CONFIG_SYS_MOR_VAL \
+ (AT91_PMC_MOSCEN | \
+ (255 << 8)) /* Main Oscillator Start-up Time */
+#define CONFIG_SYS_PLLAR_VAL \
+ (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
+ AT91_PMC_OUT | \
+ ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
+
+/* PCK/2 = MCK Master Clock from PLLA */
+#define CONFIG_SYS_MCKR1_VAL \
+ (AT91_PMC_CSS_SLOW | \
+ AT91_PMC_PRES_1 | \
+ AT91SAM9_PMC_MDIV_2 | \
+ AT91_PMC_PDIV_1)
+
+/* PCK/2 = MCK Master Clock from PLLA */
+#define CONFIG_SYS_MCKR2_VAL \
+ (AT91_PMC_CSS_PLLA | \
+ AT91_PMC_PRES_1 | \
+ AT91SAM9_PMC_MDIV_2 | \
+ AT91_PMC_PDIV_1)
+
+/* define PDC[31:16] as DATA[31:16] */
+#define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000
+/* no pull-up for D[31:16] */
+#define CONFIG_SYS_PIOC_PPUDR_VAL 0xFFFF0000
+
+/* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */
+#define CONFIG_SYS_MATRIX_EBICSA_VAL \
+ (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC)
+
+/* SDRAM */
+/* SDRAMC_MR Mode register */
+#define CONFIG_SYS_SDRC_MR_VAL1 AT91_SDRAMC_MODE_NORMAL
+/* SDRAMC_TR - Refresh Timer register */
+#define CONFIG_SYS_SDRC_TR_VAL1 0x13C
+/* SDRAMC_CR - Configuration register*/
+#define CONFIG_SYS_SDRC_CR_VAL \
+ (AT91_SDRAMC_NC_9 | \
+ AT91_SDRAMC_NR_13 | \
+ AT91_SDRAMC_NB_4 | \
+ AT91_SDRAMC_CAS_3 | \
+ AT91_SDRAMC_DBW_32 | \
+ (1 << 8) | /* Write Recovery Delay */ \
+ (7 << 12) | /* Row Cycle Delay */ \
+ (3 << 16) | /* Row Precharge Delay */ \
+ (2 << 20) | /* Row to Column Delay */ \
+ (5 << 24) | /* Active to Precharge Delay */ \
+ (1 << 28)) /* Exit Self Refresh to Active Delay */
+
+/* Memory Device Register -> SDRAM */
+#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM
+#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE
+#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH
+#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR
+#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL
+#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */
+#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */
+
+/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
+#define CONFIG_SYS_SMC0_SETUP0_VAL \
+ (AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | \
+ AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
+#define CONFIG_SYS_SMC0_PULSE0_VAL \
+ (AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | \
+ AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
+#define CONFIG_SYS_SMC0_CYCLE0_VAL \
+ (AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
+#define CONFIG_SYS_SMC0_MODE0_VAL \
+ (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \
+ AT91_SMC_DBW_16 | \
+ AT91_SMC_TDFMODE | \
+ AT91_SMC_TDF_(6))
+
+/* user reset enable */
+#define CONFIG_SYS_RSTC_RMR_VAL \
+ (AT91_RSTC_KEY | \
+ AT91_RSTC_PROCRST | \
+ AT91_RSTC_RSTTYP_WAKEUP | \
+ AT91_RSTC_RSTTYP_WATCHDOG)
+
+/* Disable Watchdog */
+#define CONFIG_SYS_WDTC_WDMR_VAL \
+ (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \
+ AT91_WDT_WDV | \
+ AT91_WDT_WDDIS | \
+ AT91_WDT_WDD)
+
+#endif /* __CONFIG_H */
diff --git a/arch/arm/boards/pm9261/env/bin/_update b/arch/arm/boards/pm9261/env/bin/_update
new file mode 100644
index 0000000..014bce3
--- /dev/null
+++ b/arch/arm/boards/pm9261/env/bin/_update
@@ -0,0 +1,36 @@
+#!/bin/sh
+
+if [ -z "$part" -o -z "$image" ]; then
+ echo "define \$part and \$image"
+ exit 1
+fi
+
+if [ ! -e "$part" ]; then
+ echo "Partition $part does not exist"
+ exit 1
+fi
+
+if [ $# = 1 ]; then
+ image=$1
+fi
+
+if [ x$ip = xdhcp ]; then
+ dhcp
+fi
+
+ping $eth0.serverip
+if [ $? -ne 0 ] ; then
+ echo "update aborted"
+ exit 1
+fi
+
+unprotect $part
+
+echo
+echo "erasing partition $part"
+erase $part
+
+echo
+echo "flashing $image to $part"
+echo
+tftp $image $part
diff --git a/arch/arm/boards/pm9261/env/bin/boot b/arch/arm/boards/pm9261/env/bin/boot
new file mode 100644
index 0000000..533dea7
--- /dev/null
+++ b/arch/arm/boards/pm9261/env/bin/boot
@@ -0,0 +1,47 @@
+#!/bin/sh
+
+. /env/config
+
+if [ x$1 = xnand ]; then
+ root=nand
+ kernel=nand
+fi
+
+if [ x$1 = xnet ]; then
+ root=net
+ kernel=net
+fi
+
+if [ x$1 = xnor ]; then
+ root=nor
+ kernel=nor
+fi
+
+if [ x$ip = xdhcp ]; then
+ bootargs="$bootargs ip=dhcp"
+else
+ bootargs="$bootargs ip=$eth0.ipaddr:$eth0.serverip:$eth0.gateway:$eth0.netmask:::"
+fi
+
+if [ x$root = xnand ]; then
+ bootargs="$bootargs root=$rootpart_nand rootfstype=jffs2"
+elif [ x$root = xnor ]; then
+ bootargs="$bootargs root=$rootpart_nor rootfstype=jffs2"
+else
+ bootargs="$bootargs root=/dev/nfs nfsroot=$eth0.serverip:$nfsroot,v3,tcp"
+fi
+
+bootargs="$bootargs mtdparts=physmap-flash.0:$nor_parts"
+
+if [ $kernel = net ]; then
+ if [ x$ip = xdhcp ]; then
+ dhcp
+ fi
+ tftp $uimage uImage || exit 1
+ bootm uImage
+elif [ $kernel = nor ]; then
+ bootm /dev/nor0.kernel
+else
+ bootm /dev/nand0.kernel.bb
+fi
+
diff --git a/arch/arm/boards/pm9261/env/bin/hush_hack b/arch/arm/boards/pm9261/env/bin/hush_hack
new file mode 100644
index 0000000..5fffa92
--- /dev/null
+++ b/arch/arm/boards/pm9261/env/bin/hush_hack
@@ -0,0 +1 @@
+nand -a /dev/nand0.*
diff --git a/arch/arm/boards/pm9261/env/bin/init b/arch/arm/boards/pm9261/env/bin/init
new file mode 100644
index 0000000..eaa298d
--- /dev/null
+++ b/arch/arm/boards/pm9261/env/bin/init
@@ -0,0 +1,38 @@
+#!/bin/sh
+
+PATH=/env/bin
+export PATH
+
+. /env/config
+if [ -e /dev/nor0 ]; then
+ addpart /dev/nor0 $nor_parts
+fi
+
+if [ -e /dev/nand0 ]; then
+ addpart /dev/nand0 $nand_parts
+
+ # Uh, oh, hush first expands wildcards and then starts executing
+ # commands. What a bug!
+ source /env/bin/hush_hack
+fi
+
+if [ -z $eth0.ethaddr ]; then
+ while [ -z $eth0.ethaddr ]; do
+ readline "no MAC address set for eth0. please enter the one found on your board: " eth0.ethaddr
+ done
+ echo -a /env/config "eth0.ethaddr=$eth0.ethaddr"
+fi
+
+echo
+echo -n "Hit any key to stop autoboot: "
+timeout -a $autoboot_timeout
+if [ $? != 0 ]; then
+ echo
+ echo "type update_kernel nor [<imagename>] to update kernel into flash"
+ echo "type update_root nor [<imagename>] to update rootfs into flash"
+ echo "type update_barebox_xmodem nor to update barebox into flash"
+ echo
+ exit
+fi
+
+boot
diff --git a/arch/arm/boards/pm9261/env/bin/update_barebox_xmodem b/arch/arm/boards/pm9261/env/bin/update_barebox_xmodem
new file mode 100644
index 0000000..39818b5
--- /dev/null
+++ b/arch/arm/boards/pm9261/env/bin/update_barebox_xmodem
@@ -0,0 +1,26 @@
+#!/bin/sh
+
+. /env/config
+
+if [ x$1 = xnand ]; then
+ part=/dev/nand0.barebox
+elif [ x$1 = xnor ]; then
+ part=/dev/nor0.barebox
+else
+ echo "usage: $0 nor|nand"
+ exit 1
+fi
+
+loadb -f barebox.bin -c
+
+unprotect $part
+echo
+echo "erasing partition $part"
+erase $part
+
+echo
+echo "flashing barebox.bin to $part"
+echo
+cp barebox.bin $part
+crc32 -f barebox.bin
+crc32 -f $part
diff --git a/arch/arm/boards/pm9261/env/bin/update_kernel b/arch/arm/boards/pm9261/env/bin/update_kernel
new file mode 100644
index 0000000..05c822d
--- /dev/null
+++ b/arch/arm/boards/pm9261/env/bin/update_kernel
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+. /env/config
+
+image=$uimage
+if [ x$1 = xnand ]; then
+ part=/dev/nand0.kernel.bb
+elif [ x$1 = xnor ]; then
+ part=/dev/nor0.kernel
+else
+ echo "usage: $0 nor|nand [imagename]"
+ exit 1
+fi
+
+. /env/bin/_update $2
diff --git a/arch/arm/boards/pm9261/env/bin/update_root b/arch/arm/boards/pm9261/env/bin/update_root
new file mode 100644
index 0000000..a751372
--- /dev/null
+++ b/arch/arm/boards/pm9261/env/bin/update_root
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+. /env/config
+
+image=$jffs2
+if [ x$1 = xnand ]; then
+ part=/dev/nand0.root.bb
+elif [ x$1 = xnor ]; then
+ part=/dev/nor0.root
+else
+ echo "usage: $0 nor|nand [imagename]"
+ exit 1
+fi
+
+. /env/bin/_update $2
+
diff --git a/arch/arm/boards/pm9261/env/config b/arch/arm/boards/pm9261/env/config
new file mode 100644
index 0000000..4b322ad
--- /dev/null
+++ b/arch/arm/boards/pm9261/env/config
@@ -0,0 +1,28 @@
+#!/bin/sh
+
+# can be either 'net', 'nor' or 'nand''
+kernel=net
+root=net
+
+uimage=uImage
+jffs2=root.jffs2
+
+autoboot_timeout=3
+
+nfsroot=""
+bootargs="console=ttyS0,115200"
+
+nor_parts="256k(barebox)ro,64k(bareboxenv),1536k(kernel),-(root)"
+rootpart_nor="/dev/mtdblock3"
+
+#nand_parts="256k(barebox)ro,64k(bareboxenv),1536k(kernel),-(root)"
+#rootpart_nand="/dev/mtdblock7"
+
+# use 'dhcp' to do dhcp in barebox and in kernel
+ip=dhcp
+
+# or set your networking parameters here
+#eth0.ipaddr=a.b.c.d
+#eth0.netmask=a.b.c.d
+#eth0.gateway=a.b.c.d
+#eth0.serverip=192.168.23.1
diff --git a/arch/arm/boards/pm9261/init.c b/arch/arm/boards/pm9261/init.c
new file mode 100644
index 0000000..4b0813b
--- /dev/null
+++ b/arch/arm/boards/pm9261/init.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) 2007 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <net.h>
+#include <init.h>
+#include <environment.h>
+#include <asm/armlinux.h>
+#include <asm/mach-types.h>
+#include <partition.h>
+#include <fs.h>
+#include <fcntl.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <nand.h>
+#include <linux/mtd/nand.h>
+#include <mach/at91_pmc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/io.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/sam9_smc.h>
+#include <dm9000.h>
+
+static struct atmel_nand_data nand_pdata = {
+ .ale = 22,
+ .cle = 21,
+/* .det_pin = ... not connected */
+ .rdy_pin = AT91_PIN_PA16,
+ .enable_pin = AT91_PIN_PC14,
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+static struct sam9_smc_config pm_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 2,
+};
+
+static void pm_add_device_nand(void)
+{
+ /* setup bus-width (8 or 16) */
+ if (nand_pdata.bus_width_16)
+ pm_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ pm_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &pm_nand_smc_config);
+
+ at91_add_device_nand(&nand_pdata);
+}
+
+/*
+ * DM9000 ethernet device
+ */
+#if defined(CONFIG_DRIVER_NET_DM9000)
+static struct dm9000_platform_data dm9000_data = {
+ .iobase = AT91_CHIPSELECT_2,
+ .iodata = AT91_CHIPSELECT_2 + 4,
+ .buswidth = DM9000_WIDTH_16,
+ .srom = 1,
+};
+
+static struct device_d dm9000_dev = {
+ .name = "dm9000",
+ .map_base = AT91_CHIPSELECT_2,
+ .size = 8,
+ .platform_data = &dm9000_data,
+};
+
+/*
+ * SMC timings for the DM9000.
+ * Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings.
+ */
+static struct sam9_smc_config __initdata dm9000_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 8,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 8,
+ .nwe_pulse = 4,
+
+ .read_cycle = 16,
+ .write_cycle = 16,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
+ .tdf_cycles = 1,
+};
+
+static void __init pm_add_device_dm9000(void)
+{
+ /* Configure chip-select 2 (DM9000) */
+ sam9_smc_configure(2, &dm9000_smc_config);
+
+ register_device(&dm9000_dev);
+}
+#else
+static void __init ek_add_device_dm9000(void) {}
+#endif /* CONFIG_DRIVER_NET_DM9000 */
+
+static struct device_d cfi_dev = {
+ .name = "cfi_flash",
+ .map_base = AT91_CHIPSELECT_0,
+ .size = 4 * 1024 * 1024,
+};
+
+static int pm9261_devices_init(void)
+{
+
+ at91_add_device_sdram(64 * 1024 * 1024);
+ pm_add_device_nand();
+ register_device(&cfi_dev);
+ pm_add_device_dm9000();
+
+ devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self");
+ devfs_add_partition("nor0", 0x40000, 0x10000, PARTITION_FIXED, "env0");
+
+ armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
+ armlinux_set_architecture(MACH_TYPE_PM9261);
+
+ return 0;
+}
+
+device_initcall(pm9261_devices_init);
+
+static int pm9261_console_init(void)
+{
+ at91_register_uart(0, 0);
+ return 0;
+}
+
+console_initcall(pm9261_console_init);
diff --git a/arch/arm/configs/pm9261_defconfig b/arch/arm/configs/pm9261_defconfig
new file mode 100644
index 0000000..a135ef7
--- /dev/null
+++ b/arch/arm/configs/pm9261_defconfig
@@ -0,0 +1,250 @@
+#
+# Automatically generated make config: don't edit
+# U-Boot version: 2.0.0-rc10
+# Wed Oct 21 16:44:38 2009
+#
+# CONFIG_BOARD_LINKER_SCRIPT is not set
+CONFIG_GENERIC_LINKER_SCRIPT=y
+CONFIG_ARM=y
+
+#
+# System Type
+#
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_S3C24xx is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+
+#
+# processor features
+#
+CONFIG_ARCH_TEXT_BASE=0x23f00000
+CONFIG_BOARDINFO="Ronetix PM9261"
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91SAM9260 is not set
+CONFIG_ARCH_AT91SAM9261=y
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_MACH_AT91SAM9261EK is not set
+CONFIG_MACH_PM9261=y
+# CONFIG_AEABI is not set
+
+#
+# Arm specific settings
+#
+CONFIG_CMD_ARM_CPUINFO=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_GREGORIAN_CALENDER=y
+CONFIG_HAS_KALLSYMS=y
+CONFIG_HAS_MODULES=y
+CONFIG_CMD_MEMORY=y
+CONFIG_ENV_HANDLING=y
+CONFIG_GENERIC_GPIO=y
+
+#
+# General Settings
+#
+CONFIG_LOCALVERSION_AUTO=y
+
+#
+# memory layout
+#
+CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y
+CONFIG_TEXT_BASE=0x23f00000
+CONFIG_HAVE_CONFIGURABLE_MEMORY_LAYOUT=y
+CONFIG_MEMORY_LAYOUT_DEFAULT=y
+# CONFIG_MEMORY_LAYOUT_FIXED is not set
+CONFIG_STACK_SIZE=0x8000
+CONFIG_MALLOC_SIZE=0x400000
+# CONFIG_BROKEN is not set
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_MACH_HAS_LOWLEVEL_INIT=y
+CONFIG_MACH_DO_LOWLEVEL_INIT=y
+CONFIG_PROMPT="PM9261:"
+CONFIG_BAUDRATE=115200
+CONFIG_LONGHELP=y
+CONFIG_CBSIZE=1024
+CONFIG_MAXARGS=16
+CONFIG_SHELL_HUSH=y
+# CONFIG_SHELL_SIMPLE is not set
+CONFIG_GLOB=y
+CONFIG_PROMPT_HUSH_PS2="> "
+# CONFIG_HUSH_FANCY_PROMPT is not set
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_DYNAMIC_CRC_TABLE=y
+CONFIG_ERRNO_MESSAGES=y
+CONFIG_TIMESTAMP=y
+CONFIG_CONSOLE_FULL=y
+CONFIG_CONSOLE_ACTIVATE_FIRST=y
+# CONFIG_OF_FLAT_TREE is not set
+CONFIG_PARTITION=y
+CONFIG_DEFAULT_ENVIRONMENT=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/pm9261/env/"
+
+#
+# Debugging
+#
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_ENABLE_FLASH_NOISE is not set
+# CONFIG_ENABLE_PARTITION_NOISE is not set
+# CONFIG_ENABLE_DEVICE_NOISE is not set
+
+#
+# Commands
+#
+
+#
+# scripting
+#
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TRUE=y
+CONFIG_CMD_FALSE=y
+
+#
+# file commands
+#
+CONFIG_CMD_LS=y
+CONFIG_CMD_RM=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_MKDIR=y
+CONFIG_CMD_RMDIR=y
+CONFIG_CMD_CP=y
+CONFIG_CMD_PWD=y
+CONFIG_CMD_CD=y
+CONFIG_CMD_MOUNT=y
+CONFIG_CMD_UMOUNT=y
+
+#
+# console
+#
+CONFIG_CMD_CLEAR=y
+CONFIG_CMD_ECHO=y
+# CONFIG_CMD_ECHO_E is not set
+
+#
+# memory
+#
+# CONFIG_CMD_LOADB is not set
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_MTEST=y
+# CONFIG_CMD_MTEST_ALTERNATIVE is not set
+
+#
+# flash
+#
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_UBI=y
+
+#
+# booting
+#
+CONFIG_CMD_BOOTM=y
+CONFIG_CMD_BOOTM_ZLIB=y
+CONFIG_CMD_BOOTM_BZLIB=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_BOOTU=y
+# CONFIG_CMD_LINUX16 is not set
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_TEST=y
+CONFIG_CMD_VERSION=y
+CONFIG_CMD_HELP=y
+CONFIG_CMD_DEVINFO=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_UNLZO=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_NFS=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+# CONFIG_NET_TFTP_PUSH is not set
+# CONFIG_NET_NETCONSOLE is not set
+# CONFIG_NET_RESOLV is not set
+
+#
+# Drivers
+#
+
+#
+# serial drivers
+#
+# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
+# CONFIG_DRIVER_SERIAL_NS16550 is not set
+CONFIG_DRIVER_SERIAL_ATMEL=y
+CONFIG_HAS_DM9000=y
+CONFIG_MIIPHY=y
+
+#
+# Network drivers
+#
+# CONFIG_DRIVER_NET_SMC911X is not set
+# CONFIG_DRIVER_NET_SMC91111 is not set
+CONFIG_DRIVER_NET_DM9000=y
+# CONFIG_DRIVER_NET_MACB is not set
+
+#
+# SPI drivers
+#
+# CONFIG_SPI is not set
+# CONFIG_I2C is not set
+
+#
+# flash drivers
+#
+CONFIG_DRIVER_CFI=y
+CONFIG_DRIVER_CFI_INTEL=y
+CONFIG_DRIVER_CFI_AMD=y
+CONFIG_DRIVER_CFI_BANK_WIDTH_1=y
+CONFIG_DRIVER_CFI_BANK_WIDTH_2=y
+CONFIG_DRIVER_CFI_BANK_WIDTH_4=y
+# CONFIG_DRIVER_CFI_BANK_WIDTH_8 is not set
+CONFIG_CFI_BUFFER_WRITE=y
+CONFIG_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_UBI=y
+# CONFIG_ATA is not set
+# CONFIG_USB is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_VIDEO is not set
+
+#
+# Filesystem support
+#
+# CONFIG_FS_CRAMFS is not set
+CONFIG_FS_RAMFS=y
+CONFIG_FS_DEVFS=y
+CONFIG_PARTITION_NEED_MTD=y
+CONFIG_ZLIB=y
+CONFIG_BZLIB=y
+CONFIG_CRC32=y
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_PROCESS_ESCAPE_SEQUENCE is not set
+CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index debc7dc..bea238b 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -9,6 +9,7 @@ config BOARDINFO
default "Atmel at91sam9261-ek" if MACH_AT91SAM9261EK
default "Atmel at91sam9263-ek" if MACH_AT91SAM9263EK
default "Bucyrus MMC-CPU" if MACH_MMCCPU
+ default "Ronetix PM9261" if MACH_PM9261
default "Ronetix PM9263" if MACH_PM9263
comment "Atmel AT91 System-on-Chip"
@@ -23,6 +24,7 @@ config ARCH_AT91SAM9260
config ARCH_AT91SAM9261
bool "AT91SAM9261"
select CPU_ARM926T
+ select MACH_HAS_LOWLEVEL_INIT
config ARCH_AT91SAM9263
bool "AT91SAM9263"
@@ -62,6 +64,12 @@ config MACH_AT91SAM9261EK
Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+config MACH_PM9261
+ bool "Ronetix PM9261"
+ select HAS_DM9000
+ help
+ Say y here if you are using the Ronetix PM9261 Board
+
endchoice
endif
--
1.7.1
More information about the barebox
mailing list