[PATCH 1/3] b43: N-PHY: define channel table struct for rev3+ devices

[Gábor Stefanik]

2010/10/15 Rafał Miłecki <zajec5 at gmail.com>:
> W dniu 15 października 2010 00:39 użytkownik Gábor Stefanik
> <netrolller.3d at gmail.com> napisał:
>> 2010/10/14 Rafał Miłecki <zajec5 at gmail.com>:
>>> Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
>>> ---
>>>  drivers/net/wireless/b43/radio_2056.c |   51 +++++++++++++++++++++++++++++++++
>>>  drivers/net/wireless/b43/radio_2056.h |   40 ++++++++++++++++++++++++--
>>>  2 files changed, 88 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/net/wireless/b43/radio_2056.c b/drivers/net/wireless/b43/radio_2056.c
>>> index d856319..f710c01 100644
>>> --- a/drivers/net/wireless/b43/radio_2056.c
>>> +++ b/drivers/net/wireless/b43/radio_2056.c
>>> @@ -24,9 +24,60 @@
>>>  #include "radio_2056.h"
>>>  #include "phy_common.h"
>>>
>>> +#define RADIOREGS3(r00, r01, r02, r03, r04, r05, r06, r07, r08, r09, \
>>> +                  r10, r11, r12, r13, r14, r15, r16, r17, r18, r19, \
>>> +                  r20, r21, r22, r23, r24, r25, r26, r27, r28, r29, \
>>> +                  r30, r31, r32, r33, r34, r35, r36) \
>>> +       .radio_syn_pll_vcocal1          = r00,  \
>>> +       .radio_syn_pll_vcocal2          = r01,  \
>>> +       .radio_syn_pll_refdiv           = r02,  \
>>> +       .radio_syn_pll_mmd2             = r03,  \
>>> +       .radio_syn_pll_mmd1             = r04,  \
>>> +       .radio_syn_pll_loopfilter1      = r05,  \
>>> +       .radio_syn_pll_loopfilter2      = r06,  \
>>> +       .radio_syn_pll_loopfilter3      = r07,  \
>>> +       .radio_syn_pll_loopfilter4      = r08,  \
>>> +       .radio_syn_pll_loopfilter5      = r09,  \
>>> +       .radio_syn_reserved_addr27      = r10,  \
>>> +       .radio_syn_reserved_addr28      = r11,  \
>>> +       .radio_syn_reserved_addr29      = r12,  \
>>> +       .radio_syn_logen_vcobuf1        = r13,  \
>>> +       .radio_syn_logen_mixer2         = r14,  \
>>> +       .radio_syn_logen_buf3           = r15,  \
>>> +       .radio_syn_logen_buf4           = r16,  \
>>> +       .radio_rx0_lnaa_tune            = r17,  \
>>> +       .radio_rx0_lnag_tune            = r18,  \
>>> +       .radio_tx0_intpaa_boost_tune    = r19,  \
>>> +       .radio_tx0_intpag_boost_tune    = r20,  \
>>> +       .radio_tx0_pada_boost_tune      = r21,  \
>>> +       .radio_tx0_padg_boost_tune      = r22,  \
>>> +       .radio_tx0_pgaa_boost_tune      = r23,  \
>>> +       .radio_tx0_pgag_boost_tune      = r24,  \
>>> +       .radio_tx0_mixa_boost_tune      = r25,  \
>>> +       .radio_tx0_mixg_boost_tune      = r26,  \
>>> +       .radio_rx1_lnaa_tune            = r27,  \
>>> +       .radio_rx1_lnag_tune            = r28,  \
>>> +       .radio_tx1_intpaa_boost_tune    = r29,  \
>>> +       .radio_tx1_intpag_boost_tune    = r30,  \
>>> +       .radio_tx1_pada_boost_tune      = r31,  \
>>> +       .radio_tx1_padg_boost_tune      = r32,  \
>>> +       .radio_tx1_pgaa_boost_tune      = r33,  \
>>> +       .radio_tx1_pgag_boost_tune      = r34,  \
>>> +       .radio_tx1_mixa_boost_tune      = r35,  \
>>> +       .radio_tx1_mixg_boost_tune      = r36
>>
>> You might want to use parentheses around parameter names: e.g.:
>> .radio_tx1_mixa_boost_tune = (r35), \
>
> We use this macro only for defining radio tables, only in this file.
> Plus we don't use any math or sth as you can see in next patch (3/3).
> That way it will not hit random developer using this macro in other
> place of code.

That's OK, but I believe that there is a coding style requirement to
always parenthesize macro parameters. If there isn't, then it's OK.

>
> --
> Rafał
>



-- 
Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-)