[PATCH 1/3] b43: N-PHY: define channel table struct for rev3+ devices

[Rafał Miłecki]

W dniu 15 października 2010 00:39 użytkownik Gábor Stefanik
<netrolller.3d at gmail.com> napisał:
> 2010/10/14 Rafał Miłecki <zajec5 at gmail.com>:
>> Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
>> ---
>>  drivers/net/wireless/b43/radio_2056.c |   51 +++++++++++++++++++++++++++++++++
>>  drivers/net/wireless/b43/radio_2056.h |   40 ++++++++++++++++++++++++--
>>  2 files changed, 88 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/net/wireless/b43/radio_2056.c b/drivers/net/wireless/b43/radio_2056.c
>> index d856319..f710c01 100644
>> --- a/drivers/net/wireless/b43/radio_2056.c
>> +++ b/drivers/net/wireless/b43/radio_2056.c
>> @@ -24,9 +24,60 @@
>>  #include "radio_2056.h"
>>  #include "phy_common.h"
>>
>> +#define RADIOREGS3(r00, r01, r02, r03, r04, r05, r06, r07, r08, r09, \
>> +                  r10, r11, r12, r13, r14, r15, r16, r17, r18, r19, \
>> +                  r20, r21, r22, r23, r24, r25, r26, r27, r28, r29, \
>> +                  r30, r31, r32, r33, r34, r35, r36) \
>> +       .radio_syn_pll_vcocal1          = r00,  \
>> +       .radio_syn_pll_vcocal2          = r01,  \
>> +       .radio_syn_pll_refdiv           = r02,  \
>> +       .radio_syn_pll_mmd2             = r03,  \
>> +       .radio_syn_pll_mmd1             = r04,  \
>> +       .radio_syn_pll_loopfilter1      = r05,  \
>> +       .radio_syn_pll_loopfilter2      = r06,  \
>> +       .radio_syn_pll_loopfilter3      = r07,  \
>> +       .radio_syn_pll_loopfilter4      = r08,  \
>> +       .radio_syn_pll_loopfilter5      = r09,  \
>> +       .radio_syn_reserved_addr27      = r10,  \
>> +       .radio_syn_reserved_addr28      = r11,  \
>> +       .radio_syn_reserved_addr29      = r12,  \
>> +       .radio_syn_logen_vcobuf1        = r13,  \
>> +       .radio_syn_logen_mixer2         = r14,  \
>> +       .radio_syn_logen_buf3           = r15,  \
>> +       .radio_syn_logen_buf4           = r16,  \
>> +       .radio_rx0_lnaa_tune            = r17,  \
>> +       .radio_rx0_lnag_tune            = r18,  \
>> +       .radio_tx0_intpaa_boost_tune    = r19,  \
>> +       .radio_tx0_intpag_boost_tune    = r20,  \
>> +       .radio_tx0_pada_boost_tune      = r21,  \
>> +       .radio_tx0_padg_boost_tune      = r22,  \
>> +       .radio_tx0_pgaa_boost_tune      = r23,  \
>> +       .radio_tx0_pgag_boost_tune      = r24,  \
>> +       .radio_tx0_mixa_boost_tune      = r25,  \
>> +       .radio_tx0_mixg_boost_tune      = r26,  \
>> +       .radio_rx1_lnaa_tune            = r27,  \
>> +       .radio_rx1_lnag_tune            = r28,  \
>> +       .radio_tx1_intpaa_boost_tune    = r29,  \
>> +       .radio_tx1_intpag_boost_tune    = r30,  \
>> +       .radio_tx1_pada_boost_tune      = r31,  \
>> +       .radio_tx1_padg_boost_tune      = r32,  \
>> +       .radio_tx1_pgaa_boost_tune      = r33,  \
>> +       .radio_tx1_pgag_boost_tune      = r34,  \
>> +       .radio_tx1_mixa_boost_tune      = r35,  \
>> +       .radio_tx1_mixg_boost_tune      = r36
>
> You might want to use parentheses around parameter names: e.g.:
> .radio_tx1_mixa_boost_tune = (r35), \

We use this macro only for defining radio tables, only in this file.
Plus we don't use any math or sth as you can see in next patch (3/3).
That way it will not hit random developer using this macro in other
place of code.

-- 
Rafał