unwanted client isolation AR9280 @ 5GHz mode
Oleksij Rempel
linux at rempel-privat.de
Thu Nov 28 05:33:41 EST 2013
Hi Gertjan,
suddenly i do not have HW to test it. My ar7010+ar2080 adapter has
blacklisted AP and IBSS modes for all 5GHz channels.
If some one else can answer here, it will be great.
Am 28.11.2013 00:54, schrieb Gertjan Hofman:
>
>
> Apologies if this should go to the ath mailing list, but we are not sure where in the stack the problem lies.
>
> On a 3.11 kernel, we are trying to create a AP host using the following hardware: driver (usb) ath9k_htc: Atheros AR9280 Rev:2 using htc_7010.fw firmware (1.3, extracted from debian unstable) After solving some regulatory domain issues by patching the ath driver, we can force the card into becoming master at 5 GHz. However, at 5GHz, the clients are isolated from each other (can not ping etc). When we switch back to 2.4 GHz (making only two changes in the hostapd file, hw_mode=a->g, channel=36->1) the system works as expected.
>
>
> Using wireshark/tcpdump I verified that ARP packets are _not_ transmitted from the AP host to other clients. In other words, ARP from client to AP hosts are resolved ok, but a client trying to resolve the MAC from another client gets no response and the packet is not seen even on a Windows host running wireshark. Switch to 2.4 GHz and the ARP packets return.
>
>
> Looking at mac80211/cfg.c, I see that host isolation is indeed an option. I printed the value of IEEE80211_SDATA_DONT_BRIDGE_PACKETS but it is false as expected.
>
>
> Can anyone tell me whether this is likely a problem at the mac80211 levelor the firmware ? Are there other settings that kick in a 5 GHz that would not at 2.4 GHz ?
>
> We are quite capable of modifying drivers but have little knowledge of wireless hardware. Any information would be much appreciated.
>
>
> Sincerely,
>
> Gertjan
>
>
> hostapd (v1.1) settings are:
> interface=wlan0
> driver=nl80211
> ssid=MSS-01
> ieee80211n=1
> macaddr_acl=0
> auth_algs=1
> ignore_broadcast_ssid=1
> require_ht=1
> ht_capab=[HT40+][SHORT-GI-40][TXSTBC][RXSTBC123]
> wmm_enabled=1
> hw_mode=a
> channel=36
> country_code=US
> ap_isolate=0
>
--
Regards,
Oleksij
More information about the ath9k_htc_fw
mailing list