[ath9k-devel] ath9k_htc: Target is unresponsive

[Eugene Krasnikov]

Did anybody tried to force the usb to go to suspend? If something like
this "echo suspend | sudo tee /sys/bus/usb/devices/usb3/power/level"
will help to reproduce this issue?

2013/5/17 Oleksij Rempel <linux at rempel-privat.de>:
> Am 17.05.2013 10:15, schrieb Ignacy Gawedzki:
>
>> On Fri, May 17, 2013 at 10:07:00AM +0200, thus spake Oleksij Rempel:
>>>
>>> OK, now i was able to reproduce it on ar9271.
>>
>>
>> Ah, good, but what did you do wrong previously then?
>
>
> Nothing. I needed to start single user mode first, and reboot the system to
> et this error.
>
>
>>
>>> In attachment is the log i grubbed form adapter.
>>> Lines starting with ######### are my comments
>>
>>
>> At least we can already diagnose a problem with A_PRINTF. :/
>>
>> Do these logs speak to anyone?
>>
>
> Here are some explanations:
> "ASIC-ROM_1.8" - is start of boot loader on device. It should go immediately
> after adapter got power.
> "8. download" - at this stage bootloader is ready to receive firmware.
> "[Tgt running" - firmware was downloaded and running.
> "!USB suspend" - means usb suspend was initiated
> And that is probably our problem.
>
> --
> Regards,
> Oleksij



-- 
Best regards,
Eugene