[PATCH v3 0/4] ath12k: Factory test mode support
Aaradhana Sahu
quic_aarasahu at quicinc.com
Mon Jun 17 04:17:01 PDT 2024
On 6/13/2024 7:00 PM, Kalle Valo wrote:
> Jeff Johnson <quic_jjohnson at quicinc.com> writes:
>
>> On 6/11/2024 1:34 AM, Aaradhana Sahu wrote:
>>
>>> Device is booted in factory test mode for calibration.
>>> The commands are sent from userspace application, which
>>> is sent to firmware using wmi commands. Firmware sends
>>> the response to driver as wmi events and driver sends
>>> these events to the application via netlink message.
>>>
>>> Also added changes related to correct pdev id access for
>>> fw test cmd.
>>>
>>> Aaradhana Sahu (3):
>>> wifi: ath: create common testmode_i.h file for ath drivers
>>> wifi: ath12k: export ath12k_wmi_tlv_hdr for testmode
>>> wifi: ath12k: add factory test mode support
>>>
>>> Rajat Soni (1):
>>> wifi: ath12k: Fill pdev id for fw test cmd
>>>
>>> ---
>>> v3:
>>> -Rebased on latest ToT
>>> -Updated Tested-on Tag
>>> -Removed second parameter of ath12k_core_start()
>>> -Updated copyright
>>> v2:
>>> -Rebased on latest ath ToT
>>> ---
>>>
>>> drivers/net/wireless/ath/ath11k/testmode.c | 78 ++--
>>> drivers/net/wireless/ath/ath12k/Makefile | 1 +
>>> drivers/net/wireless/ath/ath12k/core.c | 22 +-
>>> drivers/net/wireless/ath/ath12k/core.h | 13 +
>>> drivers/net/wireless/ath/ath12k/debug.h | 1 +
>>> drivers/net/wireless/ath/ath12k/dp.c | 3 +
>>> drivers/net/wireless/ath/ath12k/mac.c | 15 +-
>>> drivers/net/wireless/ath/ath12k/pci.c | 1 +
>>> drivers/net/wireless/ath/ath12k/testmode.c | 422 ++++++++++++++++++
>>> drivers/net/wireless/ath/ath12k/testmode.h | 40 ++
>>> drivers/net/wireless/ath/ath12k/wmi.c | 39 +-
>>> drivers/net/wireless/ath/ath12k/wmi.h | 21 +
>>> .../wireless/ath/{ath11k => }/testmode_i.h | 52 +--
>>> 13 files changed, 634 insertions(+), 74 deletions(-)
>>> create mode 100644 drivers/net/wireless/ath/ath12k/testmode.c
>>> create mode 100644 drivers/net/wireless/ath/ath12k/testmode.h
>>> rename drivers/net/wireless/ath/{ath11k => }/testmode_i.h (53%)
>>>
>>>
>>> base-commit: a116bf2be795eb1db75fa6a48aa85c397be001a6
>>
>> FYI this series is not applying cleanly in my tree for validation:
>>
>> Base: using specified base-commit a116bf2be795eb1db75fa6a48aa85c397be001a6
>> Applying: wifi: ath: create common testmode_i.h file for ath drivers
>> Using index info to reconstruct a base tree...
>> Patch failed at 0001 wifi: ath: create common testmode_i.h file for ath drivers
>> When you have resolved this problem, run "git am --continue".
>> If you prefer to skip this patch, run "git am --skip" instead.
>> To restore the original branch and stop patching, run "git am --abort".
>> error: patch failed: drivers/net/wireless/ath/ath11k/testmode_i.h:4
>> error: drivers/net/wireless/ath/ath11k/testmode_i.h: patch does not apply
>> error: Did you hand edit your patch?
>> It does not apply to blobs recorded in its index.
>>
>> I initially used b4, but tried again directly with git, and it failed for me
>> with both mechanisms.
>> Kalle, do you have any issues with this series?
>
> Also fails for me on top of commit a116bf2be795:
>
> Applying: wifi: ath: create common testmode_i.h file for ath drivers
> Using index info to reconstruct a base tree...
> error: patch failed: drivers/net/wireless/ath/ath11k/testmode_i.h:4
> error: drivers/net/wireless/ath/ath11k/testmode_i.h: patch does not apply
> error: Did you hand edit your patch?
> It does not apply to blobs recorded in its index.
> Patch failed at 0001 wifi: ath: create common testmode_i.h file for ath drivers
>
> Setting the patchset to Changes Requested.
>
I have rebased and sent the next version.
More information about the ath12k
mailing list