[PATCH v3 0/4] ath12k: Factory test mode support
Kalle Valo
kvalo at kernel.org
Thu Jun 13 06:30:34 PDT 2024
Jeff Johnson <quic_jjohnson at quicinc.com> writes:
> On 6/11/2024 1:34 AM, Aaradhana Sahu wrote:
>
>> Device is booted in factory test mode for calibration.
>> The commands are sent from userspace application, which
>> is sent to firmware using wmi commands. Firmware sends
>> the response to driver as wmi events and driver sends
>> these events to the application via netlink message.
>>
>> Also added changes related to correct pdev id access for
>> fw test cmd.
>>
>> Aaradhana Sahu (3):
>> wifi: ath: create common testmode_i.h file for ath drivers
>> wifi: ath12k: export ath12k_wmi_tlv_hdr for testmode
>> wifi: ath12k: add factory test mode support
>>
>> Rajat Soni (1):
>> wifi: ath12k: Fill pdev id for fw test cmd
>>
>> ---
>> v3:
>> -Rebased on latest ToT
>> -Updated Tested-on Tag
>> -Removed second parameter of ath12k_core_start()
>> -Updated copyright
>> v2:
>> -Rebased on latest ath ToT
>> ---
>>
>> drivers/net/wireless/ath/ath11k/testmode.c | 78 ++--
>> drivers/net/wireless/ath/ath12k/Makefile | 1 +
>> drivers/net/wireless/ath/ath12k/core.c | 22 +-
>> drivers/net/wireless/ath/ath12k/core.h | 13 +
>> drivers/net/wireless/ath/ath12k/debug.h | 1 +
>> drivers/net/wireless/ath/ath12k/dp.c | 3 +
>> drivers/net/wireless/ath/ath12k/mac.c | 15 +-
>> drivers/net/wireless/ath/ath12k/pci.c | 1 +
>> drivers/net/wireless/ath/ath12k/testmode.c | 422 ++++++++++++++++++
>> drivers/net/wireless/ath/ath12k/testmode.h | 40 ++
>> drivers/net/wireless/ath/ath12k/wmi.c | 39 +-
>> drivers/net/wireless/ath/ath12k/wmi.h | 21 +
>> .../wireless/ath/{ath11k => }/testmode_i.h | 52 +--
>> 13 files changed, 634 insertions(+), 74 deletions(-)
>> create mode 100644 drivers/net/wireless/ath/ath12k/testmode.c
>> create mode 100644 drivers/net/wireless/ath/ath12k/testmode.h
>> rename drivers/net/wireless/ath/{ath11k => }/testmode_i.h (53%)
>>
>>
>> base-commit: a116bf2be795eb1db75fa6a48aa85c397be001a6
>
> FYI this series is not applying cleanly in my tree for validation:
>
> Base: using specified base-commit a116bf2be795eb1db75fa6a48aa85c397be001a6
> Applying: wifi: ath: create common testmode_i.h file for ath drivers
> Using index info to reconstruct a base tree...
> Patch failed at 0001 wifi: ath: create common testmode_i.h file for ath drivers
> When you have resolved this problem, run "git am --continue".
> If you prefer to skip this patch, run "git am --skip" instead.
> To restore the original branch and stop patching, run "git am --abort".
> error: patch failed: drivers/net/wireless/ath/ath11k/testmode_i.h:4
> error: drivers/net/wireless/ath/ath11k/testmode_i.h: patch does not apply
> error: Did you hand edit your patch?
> It does not apply to blobs recorded in its index.
>
> I initially used b4, but tried again directly with git, and it failed for me
> with both mechanisms.
> Kalle, do you have any issues with this series?
Also fails for me on top of commit a116bf2be795:
Applying: wifi: ath: create common testmode_i.h file for ath drivers
Using index info to reconstruct a base tree...
error: patch failed: drivers/net/wireless/ath/ath11k/testmode_i.h:4
error: drivers/net/wireless/ath/ath11k/testmode_i.h: patch does not apply
error: Did you hand edit your patch?
It does not apply to blobs recorded in its index.
Patch failed at 0001 wifi: ath: create common testmode_i.h file for ath drivers
Setting the patchset to Changes Requested.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
More information about the ath12k
mailing list