[PATCH v4 06/11] wifi: ath12k: prepare EHT peer assoc parameters

[Aloka Dixit]

On 7/25/2023 3:07 AM, Wen Gong wrote:
> 
> For station mode of ath12k, the eht_cap->eht_mcs_nss_supp is from the IE 
> "Supported
> EHT-MCS and NSS Set" in assoc resp of AP in function 
> ieee80211_eht_cap_ie_to_sta_eht_cap().
> Now it is "EHT-MCS Map (BW <= 80MHz): 0x222222" for the AP(11BE-EHT mode 
> for 20 MHz
> bandwidth on 6 GHz band) in my test as below IEs.
> 
> The field only_20mhz and field _80 are union in struct 
> ieee80211_eht_mcs_nss_supp, the
> value of field _80 is 0x222222 for this AP, then the value of field 
> only_20mhz is like this:
> rx_tx_mcs7_max_nss=0x22,
> rx_tx_mcs9_max_nss=0x22,
> rx_tx_mcs11_max_nss=0x22,
> rx_tx_mcs13_max_nss=0.
> 
> Then ath12k_mac_set_eht_mcs() will get value 0 fro mcs13 because it used 
> the field only_20mhz
> passed by ath12k_peer_assoc_h_eht().
> 

Understood, I fixed the default case to check for the he_cap field for 
the bandwidth support instead of peer_phymode in v5.