[PATCH v2 0/2] Add WoW support for WCN6750

[Manikanta Pubbisetty]

Add WoW support for WCN6750.

Unlike other chips where WoW exit happens after sending WoW wakeup
WMI command, exit from WoW suspend in the case of WCN6750 happens
upon sending a WoW exit SMP2P (Shared memory point to point) message
to the firmware.

Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1

Manikanta Pubbisetty (2):
  dt: bindings: net: add bindings to add WoW support for WCN6750
  ath11k: Add WoW support for WCN6750
---
V2:
- Replaced shift/mask operation with u32_encode_bits() before sending SMP2P message
- Rebased on ToT COMMIT SHA-ID: f60b230094cbf88c73808709e4f9c1cf09eb0b01

 .../bindings/net/wireless/qcom,ath11k.yaml    |  17 +++
 drivers/net/wireless/ath/ath11k/ahb.c         | 123 +++++++++++++++++-
 drivers/net/wireless/ath/ath11k/ahb.h         |  16 +++
 drivers/net/wireless/ath/ath11k/core.c        |   7 +
 drivers/net/wireless/ath/ath11k/hw.h          |   1 +
 drivers/net/wireless/ath/ath11k/pcic.c        |  32 +++++
 drivers/net/wireless/ath/ath11k/pcic.h        |   4 +
 drivers/net/wireless/ath/ath11k/wow.c         |   8 ++
 8 files changed, 207 insertions(+), 1 deletion(-)

-- 
2.37.1