[PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
Rafał Miłecki
zajec5 at gmail.com
Tue Feb 27 14:08:03 PST 2018
On 26 February 2018 at 09:44, <s.gottschall at dd-wrt.com> wrote:
> From: Sebastian Gottschall <s.gottschall at newmedia-net.de>
>
> Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 based chipsets with on chipset connected led's
> using WMI Firmware API.
> The LED device will get available named as "ath10k-phyX" at sysfs and can be controlled with various triggers.
> adds also debugfs interface for gpio control.
Hi Sebastian,
I just noticed this patch and have one question. It seems you register
GPIO chip and that WiFi LED is controller by a GPIO. Shouldn't you use
leds-gpio driver and just register platform device with
gpio_led_platform_data? That way you could avoid some code duplication
I think? It seems to be the purpose of leds-gpio driver.
> Signed-off-by: Sebastian Gottschall <s.gottschall at dd-wrt.com>
>
> v2 add correct gpio count per chipset and remove IPQ4019 support since this chipset does not make use of specific gpios)
> v5 fix compiling without LED_CLASS and GPIOLIB support, fix also error by kbuild test robot which does not occur in standard builds. curious
> v6 correct return values and fix comment style
> v7 fix ath10k_unregister_led for compiling without LED_CLASS
> v8 fix various code design issues reported by reviewers
> v9 move led and led code to separate sourcefile (gpio.c)
> v10 compile fix if gpiolib isnt included
> v11 make register_gpio_chip static. advise by krobot
> v12 fix warning
> ---
> drivers/net/wireless/ath/ath10k/Kconfig | 10 ++
> drivers/net/wireless/ath/ath10k/Makefile | 1 +
> drivers/net/wireless/ath/ath10k/core.c | 28 ++++-
> drivers/net/wireless/ath/ath10k/core.h | 62 +++++++++-
> drivers/net/wireless/ath/ath10k/debug.c | 146 ++++++++++++++++++++++
> drivers/net/wireless/ath/ath10k/gpio.c | 196 ++++++++++++++++++++++++++++++
> drivers/net/wireless/ath/ath10k/hw.h | 2 +
> drivers/net/wireless/ath/ath10k/mac.c | 5 +
> drivers/net/wireless/ath/ath10k/wmi-ops.h | 36 +++++-
> drivers/net/wireless/ath/ath10k/wmi-tlv.c | 65 ++++++++++
> drivers/net/wireless/ath/ath10k/wmi.c | 46 +++++++
> drivers/net/wireless/ath/ath10k/wmi.h | 36 ++++++
> 12 files changed, 630 insertions(+), 3 deletions(-)
> create mode 100644 drivers/net/wireless/ath/ath10k/gpio.c
>
> diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
> index deb5ae21a559..5d61d499dca4 100644
> --- a/drivers/net/wireless/ath/ath10k/Kconfig
> +++ b/drivers/net/wireless/ath/ath10k/Kconfig
> @@ -10,6 +10,16 @@ config ATH10K
>
> If you choose to build a module, it'll be called ath10k.
>
> +config ATH10K_LEDS
> + bool "SoftLED Support"
> + depends on ATH10K
> + select MAC80211_LEDS
> + select LEDS_CLASS
> + select NEW_LEDS
> + default y
> + help
> + This option is necessary, if you want LED support for chipset connected led pins
> +
> config ATH10K_PCI
> tristate "Atheros ath10k PCI support"
> depends on ATH10K && PCI
> diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile
> index 6739ac26fd29..eccc9806fa43 100644
> --- a/drivers/net/wireless/ath/ath10k/Makefile
> +++ b/drivers/net/wireless/ath/ath10k/Makefile
> @@ -20,6 +20,7 @@ ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
> ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
> ath10k_core-$(CONFIG_THERMAL) += thermal.o
> ath10k_core-$(CONFIG_MAC80211_DEBUGFS) += debugfs_sta.o
> +ath10k_core-$(CONFIG_ATH10K_LEDS) += gpio.o
> ath10k_core-$(CONFIG_PM) += wow.o
> ath10k_core-$(CONFIG_DEV_COREDUMP) += coredump.o
>
> diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
> index f3ec13b80b20..d7f89ca98c2d 100644
> --- a/drivers/net/wireless/ath/ath10k/core.c
> +++ b/drivers/net/wireless/ath/ath10k/core.c
> @@ -21,6 +21,10 @@
> #include <linux/dmi.h>
> #include <linux/ctype.h>
> #include <asm/byteorder.h>
> +#include <linux/leds.h>
> +#include <linux/platform_device.h>
> +#include <linux/version.h>
> +
>
> #include "core.h"
> #include "mac.h"
> @@ -65,6 +69,8 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> .id = QCA988X_HW_2_0_VERSION,
> .dev_id = QCA988X_2_0_DEVICE_ID,
> .name = "qca988x hw2.0",
> + .led_pin = 1,
> + .gpio_count = 24,
> .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
> .uart_pin = 7,
> .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
> @@ -94,6 +100,8 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> .id = QCA988X_HW_2_0_VERSION,
> .dev_id = QCA988X_2_0_DEVICE_ID_UBNT,
> .name = "qca988x hw2.0 ubiquiti",
> + .led_pin = 1,
> + .gpio_count = 24,
> .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
> .uart_pin = 7,
> .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
> @@ -123,6 +131,8 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> .id = QCA9887_HW_1_0_VERSION,
> .dev_id = QCA9887_1_0_DEVICE_ID,
> .name = "qca9887 hw1.0",
> + .led_pin = 1,
> + .gpio_count = 24,
> .patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR,
> .uart_pin = 7,
> .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
> @@ -267,6 +277,8 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> .id = QCA99X0_HW_2_0_DEV_VERSION,
> .dev_id = QCA99X0_2_0_DEVICE_ID,
> .name = "qca99x0 hw2.0",
> + .led_pin = 17,
> + .gpio_count = 35,
> .patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
> .uart_pin = 7,
> .otp_exe_param = 0x00000700,
> @@ -301,6 +313,8 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> .id = QCA9984_HW_1_0_DEV_VERSION,
> .dev_id = QCA9984_1_0_DEVICE_ID,
> .name = "qca9984/qca9994 hw1.0",
> + .led_pin = 17,
> + .gpio_count = 35,
> .patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
> .uart_pin = 7,
> .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
> @@ -340,6 +354,8 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> .id = QCA9888_HW_2_0_DEV_VERSION,
> .dev_id = QCA9888_2_0_DEVICE_ID,
> .name = "qca9888 hw2.0",
> + .led_pin = 17,
> + .gpio_count = 35,
> .patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
> .uart_pin = 7,
> .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
> @@ -2372,8 +2388,15 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
> if (status)
> goto err_hif_stop;
>
> - return 0;
> +
> + status = ath10k_attach_led(ar);
> + if (status)
> + goto err_no_led;
>
> + ath10k_attach_gpio(ar);
> +
> +err_no_led:
> + return 0;
> err_hif_stop:
> ath10k_hif_stop(ar);
> err_htt_rx_detach:
> @@ -2673,6 +2696,9 @@ void ath10k_core_unregister(struct ath10k *ar)
> ath10k_core_free_board_files(ar);
>
> ath10k_debug_unregister(ar);
> +
> + ath10k_unregister_gpio_chip(ar);
> + ath10k_unregister_led(ar);
> }
> EXPORT_SYMBOL(ath10k_core_unregister);
>
> diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
> index c624b96f8b84..ed1789e716e9 100644
> --- a/drivers/net/wireless/ath/ath10k/core.h
> +++ b/drivers/net/wireless/ath/ath10k/core.h
> @@ -25,6 +25,8 @@
> #include <linux/pci.h>
> #include <linux/uuid.h>
> #include <linux/time.h>
> +#include <linux/gpio.h>
> +#include <linux/leds.h>
>
> #include "htt.h"
> #include "htc.h"
> @@ -812,6 +814,62 @@ struct ath10k_per_peer_tx_stats {
> u32 reserved2;
> };
>
> +struct ath10k_gpiocontrol {
> + struct ath10k *ar;
> +
> + /* since we have no gpio read method, these are the state variables for debugfs. */
> + u32 gpio_set_num;
> + u32 gpio_num;
> + u32 gpio_input;
> + u32 gpio_pull_type;
> + u32 gpio_intr_mode;
> + u32 gpio_set;
> +
> +#if IS_ENABLED(CONFIG_GPIOLIB)
> + struct gpio_chip gchip;
> +#endif /* CONFIG_GPIOLIB */
> + struct gpio_led wifi_led;
> + struct led_classdev cdev;
> + char label[48];
> + u32 gpio_state_dir; /* same as for debugfs, but for gpiochip implementation */
> + u32 gpio_state_pin;
> +};
> +
> +#if IS_ENABLED(CONFIG_ATH10K_LEDS)
> +void ath10k_unregister_led(struct ath10k *ar);
> +void ath10k_reset_led_pin(struct ath10k *ar);
> +int ath10k_attach_led(struct ath10k *ar);
> +#else
> +static inline void ath10k_unregister_led(struct ath10k *ar)
> +{
> +
> +}
> +static inline void ath10k_reset_led_pin(struct ath10k *ar)
> +{
> +
> +}
> +static inline int ath10k_attach_led(struct ath10k *ar)
> +{
> + return -ENODEV;
> +}
> +#endif
> +
> +#if IS_ENABLED(CONFIG_ATH10K_LEDS) && IS_ENABLED(CONFIG_GPIOLIB)
> +void ath10k_unregister_gpio_chip(struct ath10k *ar);
> +#else
> +static inline void ath10k_unregister_gpio_chip(struct ath10k *ar)
> +{
> +
> +}
> +#endif
> +#if IS_ENABLED(CONFIG_ATH10K_LEDS)
> +int ath10k_attach_gpio(struct ath10k *ar);
> +#else
> +static inline int ath10k_attach_gpio(struct ath10k *ar)
> +{
> + return -ENODEV;
> +}
> +#endif
> struct ath10k {
> struct ath_common ath_common;
> struct ieee80211_hw *hw;
> @@ -840,7 +898,9 @@ struct ath10k {
> u32 low_5ghz_chan;
> u32 high_5ghz_chan;
> bool ani_enabled;
> -
> +#if IS_ENABLED(CONFIG_ATH10K_LEDS)
> + struct ath10k_gpiocontrol *gpio;
> +#endif
> bool p2p;
>
> struct {
> diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
> index 1b9c092d210f..a8baa7424633 100644
> --- a/drivers/net/wireless/ath/ath10k/debug.c
> +++ b/drivers/net/wireless/ath/ath10k/debug.c
> @@ -1084,6 +1084,126 @@ static ssize_t ath10k_write_fw_dbglog(struct file *file,
> return ret;
> }
>
> +#if IS_ENABLED(CONFIG_ATH10K_LEDS)
> +static ssize_t ath10k_read_gpio_config(struct file *file, char __user *user_buf,
> + size_t count, loff_t *ppos)
> +{
> + struct ath10k *ar = file->private_data;
> + struct ath10k_gpiocontrol *gpio = ar->gpio;
> + size_t len;
> + char buf[96];
> + if (!gpio)
> + return 0;
> +
> + len = scnprintf(buf, sizeof(buf), "%u %u %u %u\n", gpio->gpio_num, gpio->gpio_input, gpio->gpio_pull_type, gpio->gpio_intr_mode);
> +
> + return simple_read_from_buffer(user_buf, count, ppos, buf, len);
> +}
> +
> +
> +static ssize_t ath10k_write_gpio_config(struct file *file,
> + const char __user *user_buf,
> + size_t count, loff_t *ppos)
> +{
> + struct ath10k *ar = file->private_data;
> + struct ath10k_gpiocontrol *gpio = ar->gpio;
> + int ret;
> + char buf[96];
> + u32 gpio_num, input, pull_type, intr_mode;
> + if (!gpio)
> + return -EINVAL;
> +
> + simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
> +
> + /* make sure that buf is null terminated */
> + buf[sizeof(buf) - 1] = 0;
> +
> + gpio->gpio_num = gpio_num;
> + gpio->gpio_input = input;
> + gpio->gpio_pull_type = pull_type;
> + gpio->gpio_intr_mode = intr_mode;
> + ret = sscanf(buf, "%u %u %u %u", &gpio_num, &input, &pull_type, &intr_mode);
> +
> + if (!ret)
> + return -EINVAL;
> +
> +
> + mutex_lock(&ar->conf_mutex);
> +
> +
> + ret = ath10k_wmi_gpio_config(ar, gpio_num, input, pull_type, intr_mode);
> +
> + if (ret) {
> + ath10k_warn(ar, "gpio_config cfg failed from debugfs: %d\n", ret);
> + goto exit;
> + }
> + ret = count;
> +
> +exit:
> + mutex_unlock(&ar->conf_mutex);
> +
> + return ret;
> +}
> +
> +static ssize_t ath10k_read_gpio_output(struct file *file, char __user *user_buf,
> + size_t count, loff_t *ppos)
> +{
> + struct ath10k *ar = file->private_data;
> + struct ath10k_gpiocontrol *gpio = ar->gpio;
> + size_t len;
> + char buf[96];
> + if (!gpio)
> + return 0;
> +
> + len = scnprintf(buf, sizeof(buf), "%u %u\n", gpio->gpio_num, gpio->gpio_set);
> +
> + return simple_read_from_buffer(user_buf, count, ppos, buf, len);
> +}
> +
> +
> +static ssize_t ath10k_write_gpio_output(struct file *file,
> + const char __user *user_buf,
> + size_t count, loff_t *ppos)
> +{
> + struct ath10k *ar = file->private_data;
> + struct ath10k_gpiocontrol *gpio = ar->gpio;
> + int ret;
> + char buf[96];
> + u32 gpio_num, set;
> + if (!gpio)
> + return -EINVAL;
> +
> + simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
> +
> + /* make sure that buf is null terminated */
> + buf[sizeof(buf) - 1] = 0;
> +
> + gpio->gpio_set_num = gpio_num;
> + gpio->gpio_set = set;
> + ret = sscanf(buf, "%u %u", &gpio_num, &set);
> +
> + if (!ret)
> + return -EINVAL;
> +
> +
> + mutex_lock(&ar->conf_mutex);
> +
> +
> + ret = ath10k_wmi_gpio_output(ar, gpio_num, set);
> +
> + if (ret) {
> + ath10k_warn(ar, "gpio_output cfg failed from debugfs: %d\n", ret);
> + goto exit;
> + }
> + ret = count;
> +
> +exit:
> + mutex_unlock(&ar->conf_mutex);
> +
> + return ret;
> +}
> +#endif
> +
> /* TODO: Would be nice to always support ethtool stats, would need to
> * move the stats storage out of ath10k_debug, or always have ath10k_debug
> * struct available..
> @@ -1252,6 +1372,25 @@ static const struct file_operations fops_fw_dbglog = {
> .llseek = default_llseek,
> };
>
> +
> +#if IS_ENABLED(CONFIG_ATH10K_LEDS)
> +static const struct file_operations fops_gpio_output = {
> + .read = ath10k_read_gpio_output,
> + .write = ath10k_write_gpio_output,
> + .open = simple_open,
> + .owner = THIS_MODULE,
> + .llseek = default_llseek,
> +};
> +
> +static const struct file_operations fops_gpio_config = {
> + .read = ath10k_read_gpio_config,
> + .write = ath10k_write_gpio_config,
> + .open = simple_open,
> + .owner = THIS_MODULE,
> + .llseek = default_llseek,
> +};
> +#endif
> +
> static int ath10k_debug_cal_data_fetch(struct ath10k *ar)
> {
> u32 hi_addr;
> @@ -2259,6 +2398,13 @@ int ath10k_debug_register(struct ath10k *ar)
> debugfs_create_file("fw_dbglog", 0600, ar->debug.debugfs_phy, ar,
> &fops_fw_dbglog);
>
> +#if IS_ENABLED(CONFIG_ATH10K_LEDS)
> + debugfs_create_file("gpio_output", 0600, ar->debug.debugfs_phy, ar,
> + &fops_gpio_output);
> +
> + debugfs_create_file("gpio_config", 0600, ar->debug.debugfs_phy, ar,
> + &fops_gpio_config);
> +#endif
> debugfs_create_file("cal_data", 0400, ar->debug.debugfs_phy, ar,
> &fops_cal_data);
>
> diff --git a/drivers/net/wireless/ath/ath10k/gpio.c b/drivers/net/wireless/ath/ath10k/gpio.c
> new file mode 100644
> index 000000000000..e9ce44bb21b0
> --- /dev/null
> +++ b/drivers/net/wireless/ath/ath10k/gpio.c
> @@ -0,0 +1,196 @@
> +/*
> + * Copyright (c) 2005-2011 Atheros Communications Inc.
> + * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
> + * Copyright (c) 2018 Sebastian Gottschall <s.gottschall at dd-wrt.com>
> + *
> + * Permission to use, copy, modify, and/or distribute this software for any
> + * purpose with or without fee is hereby granted, provided that the above
> + * copyright notice and this permission notice appear in all copies.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
> + */
> +
> +
> +#include <linux/module.h>
> +#include <linux/firmware.h>
> +#include <linux/of.h>
> +#include <linux/dmi.h>
> +#include <linux/ctype.h>
> +#include <asm/byteorder.h>
> +#include <linux/leds.h>
> +#include <linux/platform_device.h>
> +#include <linux/version.h>
> +
> +
> +#include "core.h"
> +#include "wmi.h"
> +#include "wmi-ops.h"
> +
> +#if IS_ENABLED(CONFIG_GPIOLIB)
> +static int ath10k_gpio_pin_cfg_input(struct gpio_chip *chip, unsigned offset)
> +{
> + struct ath10k_gpiocontrol *gpio = container_of(chip, struct ath10k_gpiocontrol, gchip);
> + ath10k_wmi_gpio_config(gpio->ar, offset, 1, WMI_GPIO_PULL_NONE, WMI_GPIO_INTTYPE_DISABLE); /* configure to input */
> + gpio->gpio_state_dir = 1;
> + return 0;
> +}
> +
> +/* gpio_chip handler : set GPIO to output */
> +static int ath10k_gpio_pin_cfg_output(struct gpio_chip *chip, unsigned offset,
> + int value)
> +{
> + struct ath10k_gpiocontrol *gpio = container_of(chip, struct ath10k_gpiocontrol, gchip);
> +
> + ath10k_wmi_gpio_config(gpio->ar, offset, 0, WMI_GPIO_PULL_NONE, WMI_GPIO_INTTYPE_DISABLE); /* configure to output */
> + ath10k_wmi_gpio_output(gpio->ar, offset, value);
> + gpio->gpio_state_dir = 0;
> + gpio->gpio_state_pin = value;
> + return 0;
> +}
> +
> +/* gpio_chip handler : query GPIO direction (0=out, 1=in) */
> +static int ath10k_gpio_pin_get_dir(struct gpio_chip *chip, unsigned offset)
> +{
> + struct ath10k_gpiocontrol *gpio = container_of(chip, struct ath10k_gpiocontrol, gchip);
> +
> + return gpio->gpio_state_dir;
> +}
> +
> +/* gpio_chip handler : get GPIO pin value */
> +static int ath10k_gpio_pin_get(struct gpio_chip *chip, unsigned offset)
> +{
> + struct ath10k_gpiocontrol *gpio = container_of(chip, struct ath10k_gpiocontrol, gchip);
> +
> + return gpio->gpio_state_pin;
> +}
> +
> +/* gpio_chip handler : set GPIO pin to value */
> +static void ath10k_gpio_pin_set(struct gpio_chip *chip, unsigned offset,
> + int value)
> +{
> + struct ath10k_gpiocontrol *gpio = container_of(chip, struct ath10k_gpiocontrol, gchip);
> +
> + ath10k_wmi_gpio_output(gpio->ar, offset, value);
> + gpio->gpio_state_pin = value;
> +}
> +
> +/* register GPIO chip */
> +static int ath10k_register_gpio_chip(struct ath10k *ar)
> +{
> +
> + struct ath10k_gpiocontrol *gpio = ar->gpio;
> + if (!gpio) {
> + return -ENODEV;
> + }
> + gpio->gchip.parent = ar->dev;
> + gpio->gchip.base = -1; /* determine base automatically */
> + gpio->gchip.ngpio = ar->hw_params.gpio_count;
> + gpio->gchip.label = gpio->label;
> + gpio->gchip.direction_input = ath10k_gpio_pin_cfg_input;
> + gpio->gchip.direction_output = ath10k_gpio_pin_cfg_output;
> + gpio->gchip.get_direction = ath10k_gpio_pin_get_dir;
> + gpio->gchip.get = ath10k_gpio_pin_get;
> + gpio->gchip.set = ath10k_gpio_pin_set;
> +
> + if (gpiochip_add(&gpio->gchip)) {
> + dev_err(ar->dev, "Error while registering gpio chip\n");
> + return -ENODEV;
> + }
> + gpio->gchip.owner = NULL;
> + gpio->ar = ar;
> + return 0;
> +}
> +
> +/* remove GPIO chip */
> +void ath10k_unregister_gpio_chip(struct ath10k *ar)
> +{
> + struct ath10k_gpiocontrol *gpio = ar->gpio;
> + if (gpio) {
> + gpiochip_remove(&gpio->gchip);
> + }
> +}
> +
> +int ath10k_attach_gpio(struct ath10k *ar)
> +{
> + if (ar->hw_params.led_pin) { /* only attach if non zero since some chipsets are unsupported yet */
> + return ath10k_register_gpio_chip(ar);
> + }
> +
> + return -ENODEV;
> +}
> +
> +#endif
> +
> +
> +static void ath10k_led_brightness(struct led_classdev *led_cdev,
> + enum led_brightness brightness)
> +{
> + struct ath10k_gpiocontrol *gpio = container_of(led_cdev, struct ath10k_gpiocontrol, cdev);
> + struct gpio_led *led = &gpio->wifi_led;
> + if (gpio->ar->state == ATH10K_STATE_ON) {
> + gpio->gpio_state_pin = (brightness != LED_OFF) ^ led->active_low;
> + ath10k_wmi_gpio_output(gpio->ar, led->gpio, gpio->gpio_state_pin);
> + }
> +}
> +
> +static int ath10k_add_led(struct ath10k *ar, struct gpio_led *gpioled)
> +{
> + int ret;
> + struct ath10k_gpiocontrol *gpio = ar->gpio;
> + gpio->cdev.name = gpioled->name;
> + gpio->cdev.default_trigger = gpioled->default_trigger;
> + gpio->cdev.brightness_set = ath10k_led_brightness;
> +
> + ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &gpio->cdev);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +void ath10k_unregister_led(struct ath10k *ar)
> +{
> + struct ath10k_gpiocontrol *gpio = ar->gpio;
> + if (gpio) {
> + led_classdev_unregister(&gpio->cdev);
> + kfree(gpio);
> + }
> +}
> +
> +void ath10k_reset_led_pin(struct ath10k *ar)
> +{
> + /* need to reset gpio state */
> + if (ar->hw_params.led_pin) {
> + ath10k_wmi_gpio_config(ar, ar->hw_params.led_pin, 0, WMI_GPIO_PULL_NONE, WMI_GPIO_INTTYPE_DISABLE);
> + ath10k_wmi_gpio_output(ar, ar->hw_params.led_pin, 1);
> + }
> +}
> +
> +int ath10k_attach_led(struct ath10k *ar)
> +{
> + struct ath10k_gpiocontrol *gpio;
> + if (ar->gpio) { /* already registered, ignore */
> + return -EINVAL;
> + }
> + gpio = kzalloc(sizeof(struct ath10k_gpiocontrol), GFP_KERNEL);
> + if (!gpio) {
> + return -ENOMEM;
> + }
> + ar->gpio = gpio;
> + snprintf(gpio->label, sizeof(gpio->label), "ath10k-%s",
> + wiphy_name(ar->hw->wiphy));
> + gpio->wifi_led.active_low = 1;
> + gpio->wifi_led.gpio = ar->hw_params.led_pin;
> + gpio->wifi_led.name = gpio->label;
> + gpio->wifi_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
> +
> + ath10k_add_led(ar, &gpio->wifi_led);
> + ath10k_reset_led_pin(ar); /* initially we need to configure the led pin to output */
> + return 0;
> +}
> diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
> index 413b1b4321f7..af91d0202e45 100644
> --- a/drivers/net/wireless/ath/ath10k/hw.h
> +++ b/drivers/net/wireless/ath/ath10k/hw.h
> @@ -495,6 +495,8 @@ struct ath10k_hw_params {
> const char *name;
> u32 patch_load_addr;
> int uart_pin;
> + int led_pin; /* 1 for peregrine, 17 for beeliner */
> + int gpio_count; /* 24 for peregrine, 35 for beeliner */
> u32 otp_exe_param;
>
> /* Type of hw cycle counter wraparound logic, for more info
> diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
> index ebb3f1b046f3..6c4925dfcde9 100644
> --- a/drivers/net/wireless/ath/ath10k/mac.c
> +++ b/drivers/net/wireless/ath/ath10k/mac.c
> @@ -4601,6 +4601,11 @@ static int ath10k_start(struct ieee80211_hw *hw)
> switch (ar->state) {
> case ATH10K_STATE_OFF:
> ar->state = ATH10K_STATE_ON;
> + /*
> + * under some circumstances, the gpio pin gets reconfigured to default state by the firmware, so we need to reconfigure it
> + * this behaviour has only ben seen on QCA9984 and QCA99XX devices so far
> + */
> + ath10k_reset_led_pin(ar);
> break;
> case ATH10K_STATE_RESTARTING:
> ar->state = ATH10K_STATE_RESTARTED;
> diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
> index 14093cfdc505..a38d6a8f7ec5 100644
> --- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
> +++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
> @@ -197,8 +197,13 @@ struct wmi_ops {
> (struct ath10k *ar,
> enum wmi_bss_survey_req_type type);
> struct sk_buff *(*gen_echo)(struct ath10k *ar, u32 value);
> +
> + struct sk_buff *(*gen_gpio_config)(struct ath10k *ar, u32 gpio_num, u32 input, u32 pull_type, u32 intr_mode);
> +
> + struct sk_buff *(*gen_gpio_output)(struct ath10k *ar, u32 gpio_num, u32 set);
> };
>
> +
> int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
>
> static inline int
> @@ -957,6 +962,35 @@ ath10k_wmi_force_fw_hang(struct ath10k *ar,
>
> return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->force_fw_hang_cmdid);
> }
> +static inline int
> +ath10k_wmi_gpio_config(struct ath10k *ar, u32 gpio_num, u32 input, u32 pull_type, u32 intr_mode)
> +{
> + struct sk_buff *skb;
> +
> + if (!ar->wmi.ops->gen_gpio_config)
> + return -EOPNOTSUPP;
> +
> + skb = ar->wmi.ops->gen_gpio_config(ar, gpio_num, input, pull_type, intr_mode);
> + if (IS_ERR(skb))
> + return PTR_ERR(skb);
> +
> + return ath10k_wmi_cmd_send_nowait(ar, skb, ar->wmi.cmd->gpio_config_cmdid);
> +}
> +
> +static inline int
> +ath10k_wmi_gpio_output(struct ath10k *ar, u32 gpio_num, u32 set)
> +{
> + struct sk_buff *skb;
> +
> + if (!ar->wmi.ops->gen_gpio_config)
> + return -EOPNOTSUPP;
> +
> + skb = ar->wmi.ops->gen_gpio_output(ar, gpio_num, set);
> + if (IS_ERR(skb))
> + return PTR_ERR(skb);
> +
> + return ath10k_wmi_cmd_send_nowait(ar, skb, ar->wmi.cmd->gpio_output_cmdid);
> +}
>
> static inline int
> ath10k_wmi_dbglog_cfg(struct ath10k *ar, u64 module_enable, u32 log_level)
> @@ -1034,7 +1068,7 @@ ath10k_wmi_pdev_get_temperature(struct ath10k *ar)
> if (IS_ERR(skb))
> return PTR_ERR(skb);
>
> - return ath10k_wmi_cmd_send(ar, skb,
> + return ath10k_wmi_cmd_send_nowait(ar, skb,
> ar->wmi.cmd->pdev_get_temperature_cmdid);
> }
>
> diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
> index ae77a007ae07..2bfba63f1dcf 100644
> --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
> +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
> @@ -3250,6 +3250,69 @@ ath10k_wmi_tlv_op_gen_echo(struct ath10k *ar, u32 value)
> return skb;
> }
>
> +static struct sk_buff *
> +ath10k_wmi_tlv_op_gen_gpio_config(struct ath10k *ar, u32 gpio_num, u32 input, u32 pull_type, u32 intr_mode)
> +{
> + struct wmi_gpio_config_cmd *cmd;
> + struct wmi_tlv *tlv;
> + struct sk_buff *skb;
> + void *ptr;
> + size_t len;
> +
> + len = sizeof(*tlv) + sizeof(*cmd);
> + skb = ath10k_wmi_alloc_skb(ar, len);
> + if (!skb)
> + return ERR_PTR(-ENOMEM);
> +
> + ptr = (void *)skb->data;
> + tlv = ptr;
> + tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_GPIO_CONFIG_CMD);
> + tlv->len = __cpu_to_le16(sizeof(*cmd));
> +
> + cmd = (struct wmi_gpio_config_cmd *)skb->data;
> + cmd->pull_type = __cpu_to_le32(pull_type);
> + cmd->gpio_num = __cpu_to_le32(gpio_num);
> + cmd->input = __cpu_to_le32(input);
> + cmd->intr_mode = __cpu_to_le32(intr_mode);
> +
> + ptr += sizeof(*tlv);
> + ptr += sizeof(*cmd);
> +
> + ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv gpio_config gpio_num 0x%08x input 0x%08x pull_type 0x%08x intr_mode 0x%08x\n", gpio_num, input, pull_type, intr_mode);
> + return skb;
> +}
> +
> +static struct sk_buff *
> +ath10k_wmi_tlv_op_gen_gpio_output(struct ath10k *ar, u32 gpio_num, u32 set)
> +{
> + struct wmi_gpio_output_cmd *cmd;
> + struct wmi_tlv *tlv;
> + struct sk_buff *skb;
> + void *ptr;
> + size_t len;
> +
> + len = sizeof(*tlv) + sizeof(*cmd);
> + skb = ath10k_wmi_alloc_skb(ar, len);
> + if (!skb)
> + return ERR_PTR(-ENOMEM);
> +
> + ptr = (void *)skb->data;
> + tlv = ptr;
> + tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_GPIO_OUTPUT_CMD);
> + tlv->len = __cpu_to_le16(sizeof(*cmd));
> +
> + cmd = (struct wmi_gpio_output_cmd *)skb->data;
> + cmd->gpio_num = __cpu_to_le32(gpio_num);
> + cmd->set = __cpu_to_le32(set);
> +
> + ptr += sizeof(*tlv);
> + ptr += sizeof(*cmd);
> +
> + ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv gpio_output gpio_num 0x%08x set 0x%08x\n", gpio_num, set);
> + return skb;
> +}
> +
> +
> static struct sk_buff *
> ath10k_wmi_tlv_op_gen_vdev_spectral_conf(struct ath10k *ar,
> const struct wmi_vdev_spectral_conf_arg *arg)
> @@ -3727,6 +3790,8 @@ static const struct wmi_ops wmi_tlv_ops = {
> .fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
> .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
> .gen_echo = ath10k_wmi_tlv_op_gen_echo,
> + .gen_gpio_config = ath10k_wmi_tlv_op_gen_gpio_config,
> + .gen_gpio_output = ath10k_wmi_tlv_op_gen_gpio_output,
> .gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
> .gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,
> };
> diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
> index 58dc2189ba49..b56e5a673a8c 100644
> --- a/drivers/net/wireless/ath/ath10k/wmi.c
> +++ b/drivers/net/wireless/ath/ath10k/wmi.c
> @@ -6646,6 +6646,41 @@ ath10k_wmi_op_gen_peer_set_param(struct ath10k *ar, u32 vdev_id,
> return skb;
> }
>
> +static struct sk_buff *
> +ath10k_wmi_op_gen_gpio_config(struct ath10k *ar, u32 gpio_num, u32 input, u32 pull_type, u32 intr_mode)
> +{
> + struct wmi_gpio_config_cmd *cmd;
> + struct sk_buff *skb;
> +
> + skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
> + if (!skb)
> + return ERR_PTR(-ENOMEM);
> + cmd = (struct wmi_gpio_config_cmd *)skb->data;
> + cmd->pull_type = __cpu_to_le32(pull_type);
> + cmd->gpio_num = __cpu_to_le32(gpio_num);
> + cmd->input = __cpu_to_le32(input);
> + cmd->intr_mode = __cpu_to_le32(intr_mode);
> +
> + ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_config gpio_num 0x%08x input 0x%08x pull_type 0x%08x intr_mode 0x%08x\n", gpio_num, input, pull_type, intr_mode);
> + return skb;
> +}
> +
> +static struct sk_buff *
> +ath10k_wmi_op_gen_gpio_output(struct ath10k *ar, u32 gpio_num, u32 set)
> +{
> + struct wmi_gpio_output_cmd *cmd;
> + struct sk_buff *skb;
> +
> + skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
> + if (!skb)
> + return ERR_PTR(-ENOMEM);
> + cmd = (struct wmi_gpio_output_cmd *)skb->data;
> + cmd->gpio_num = __cpu_to_le32(gpio_num);
> + cmd->set = __cpu_to_le32(set);
> + ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_output gpio_num 0x%08x set 0x%08x\n", gpio_num, set);
> + return skb;
> +}
> +
> static struct sk_buff *
> ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id,
> enum wmi_sta_ps_mode psmode)
> @@ -8153,6 +8188,9 @@ static const struct wmi_ops wmi_ops = {
> .fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
> .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
> .gen_echo = ath10k_wmi_op_gen_echo,
> + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
> + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
> +
> /* .gen_bcn_tmpl not implemented */
> /* .gen_prb_tmpl not implemented */
> /* .gen_p2p_go_bcn_ie not implemented */
> @@ -8223,6 +8261,8 @@ static const struct wmi_ops wmi_10_1_ops = {
> .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
> .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
> .gen_echo = ath10k_wmi_op_gen_echo,
> + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
> + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
> /* .gen_bcn_tmpl not implemented */
> /* .gen_prb_tmpl not implemented */
> /* .gen_p2p_go_bcn_ie not implemented */
> @@ -8294,6 +8334,8 @@ static const struct wmi_ops wmi_10_2_ops = {
> .gen_delba_send = ath10k_wmi_op_gen_delba_send,
> .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
> .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
> + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
> + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
> /* .gen_pdev_enable_adaptive_cca not implemented */
> };
>
> @@ -8364,6 +8406,8 @@ static const struct wmi_ops wmi_10_2_4_ops = {
> .gen_pdev_enable_adaptive_cca =
> ath10k_wmi_op_gen_pdev_enable_adaptive_cca,
> .get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype,
> + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
> + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
> /* .gen_bcn_tmpl not implemented */
> /* .gen_prb_tmpl not implemented */
> /* .gen_p2p_go_bcn_ie not implemented */
> @@ -8439,6 +8483,8 @@ static const struct wmi_ops wmi_10_4_ops = {
> .gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
> .gen_echo = ath10k_wmi_op_gen_echo,
> .gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config,
> + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
> + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
> };
>
> int ath10k_wmi_attach(struct ath10k *ar)
> diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
> index c7b30ed9015d..dc180a86dc3b 100644
> --- a/drivers/net/wireless/ath/ath10k/wmi.h
> +++ b/drivers/net/wireless/ath/ath10k/wmi.h
> @@ -2906,6 +2906,42 @@ enum wmi_10_4_feature_mask {
>
> };
>
> +/* WMI_GPIO_CONFIG_CMDID */
> +enum {
> + WMI_GPIO_PULL_NONE,
> + WMI_GPIO_PULL_UP,
> + WMI_GPIO_PULL_DOWN,
> +};
> +
> +enum {
> + WMI_GPIO_INTTYPE_DISABLE,
> + WMI_GPIO_INTTYPE_RISING_EDGE,
> + WMI_GPIO_INTTYPE_FALLING_EDGE,
> + WMI_GPIO_INTTYPE_BOTH_EDGE,
> + WMI_GPIO_INTTYPE_LEVEL_LOW,
> + WMI_GPIO_INTTYPE_LEVEL_HIGH
> +};
> +
> +/* WMI_GPIO_CONFIG_CMDID */
> +struct wmi_gpio_config_cmd {
> + __le32 gpio_num; /* GPIO number to be setup */
> + __le32 input; /* 0 - Output/ 1 - Input */
> + __le32 pull_type; /* Pull type defined above */
> + __le32 intr_mode; /* Interrupt mode defined above (Input) */
> +} __packed;
> +
> +/* WMI_GPIO_OUTPUT_CMDID */
> +struct wmi_gpio_output_cmd {
> + __le32 gpio_num; /* GPIO number to be setup */
> + __le32 set; /* Set the GPIO pin*/
> +} __packed;
> +
> +/* WMI_GPIO_INPUT_EVENTID */
> +struct wmi_gpio_input_event {
> + __le32 gpio_num; /* GPIO number which changed state */
> +} __packed;
> +
> +
> struct wmi_ext_resource_config_10_4_cmd {
> /* contains enum wmi_host_platform_type */
> __le32 host_platform_config;
> --
> 2.14.1
>
--
Rafał
More information about the ath10k
mailing list