[PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets

[Sebastian Gottschall]

Am 27.02.2018 um 18:03 schrieb Steve deRosier:
> On Mon, Feb 26, 2018 at 12:44 AM, <s.gottschall at dd-wrt.com> wrote:
>> From: Sebastian Gottschall <s.gottschall at newmedia-net.de>
>>
>> Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 based chipsets with on chipset connected led's
>> using WMI Firmware API.
>> The LED device will get available named as "ath10k-phyX" at sysfs and can be controlled with various triggers.
>> adds also debugfs interface for gpio control.
>>
>> Signed-off-by: Sebastian Gottschall <s.gottschall at dd-wrt.com>
>>
>> v2  add correct gpio count per chipset and remove IPQ4019 support since this chipset does not make use of specific gpios)
>> v5  fix compiling without LED_CLASS and GPIOLIB support, fix also error by kbuild test robot which does not occur in standard builds. curious
>> v6  correct return values and fix comment style
>> v7  fix ath10k_unregister_led for compiling without LED_CLASS
>> v8  fix various code design issues reported by reviewers
>> v9  move led and led code to separate sourcefile (gpio.c)
>> v10 compile fix if gpiolib isnt included
>> v11 make register_gpio_chip static. advise by krobot
>> v12 fix warning
>> ---
>>   drivers/net/wireless/ath/ath10k/Kconfig   |  10 ++
>>   drivers/net/wireless/ath/ath10k/Makefile  |   1 +
>>   drivers/net/wireless/ath/ath10k/core.c    |  28 ++++-
>>   drivers/net/wireless/ath/ath10k/core.h    |  62 +++++++++-
>>   drivers/net/wireless/ath/ath10k/debug.c   | 146 ++++++++++++++++++++++
>>   drivers/net/wireless/ath/ath10k/gpio.c    | 196 ++++++++++++++++++++++++++++++
>>   drivers/net/wireless/ath/ath10k/hw.h      |   2 +
>>   drivers/net/wireless/ath/ath10k/mac.c     |   5 +
>>   drivers/net/wireless/ath/ath10k/wmi-ops.h |  36 +++++-
>>   drivers/net/wireless/ath/ath10k/wmi-tlv.c |  65 ++++++++++
>>   drivers/net/wireless/ath/ath10k/wmi.c     |  46 +++++++
>>   drivers/net/wireless/ath/ath10k/wmi.h     |  36 ++++++
>>   12 files changed, 630 insertions(+), 3 deletions(-)
>>   create mode 100644 drivers/net/wireless/ath/ath10k/gpio.c
>
> Assuming that kbuild robot doesn't kick back another build-time
> warning, it looks OK to me.
:-) seems so
>
> Reviewed-by: Steve deRosier <derosier at cal-sierra.com>
>
> --
> Steve deRosier
> Cal-Sierra Consulting LLC
> https://www.cal-sierra.com/
>

-- 
Mit freundlichen Grüssen / Regards

Sebastian Gottschall / CTO

NewMedia-NET GmbH - DD-WRT
Firmensitz:  Stubenwaldallee 21a, 64625 Bensheim
Registergericht: Amtsgericht Darmstadt, HRB 25473
Geschäftsführer: Peter Steinhäuser, Christian Scheele
http://www.dd-wrt.com
email: s.gottschall at dd-wrt.com
Tel.: +496251-582650 / Fax: +496251-5826565