failed to run otp: -22

[Arvid Picciani]

Hi,

Is it ok to run a QCA9880 with skip_otp=1?
It's working fine with skip_ota, but just want to confirm this is safe.

without skip_otp, mine isn't coming up because of "failed to run otp: -22"

[    9.287905] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[    9.293912] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1
irq_mode 0 reset_mode 0
[    9.568820] ath10k_pci 0000:00:00.0: Direct firmware load for
ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
[    9.579896] ath10k_pci 0000:00:00.0: Falling back to user helper
[    9.737064] firmware ath10k!pre-cal-pci-0000:00:00.0.bin:
firmware_loading_store: map pages failed
[    9.746618] ath10k_pci 0000:00:00.0: Direct firmware load for
ath10k/cal-pci-0000:00:00.0.bin failed with error -2
[    9.757342] ath10k_pci 0000:00:00.0: Falling back to user helper
[    9.909261] firmware ath10k!cal-pci-0000:00:00.0.bin:
firmware_loading_store: map pages failed
[    9.918500] ath10k_pci 0000:00:00.0: Direct firmware load for
ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
[    9.929582] ath10k_pci 0000:00:00.0: Falling back to user helper
[   10.059370] firmware ath10k!QCA988X!hw2.0!firmware-6.bin:
firmware_loading_store: map pages failed
[   10.073667] ath10k_pci 0000:00:00.0: qca988x hw2.0 target
0x4100016c chip_id 0x043202ff sub 0000:0000
[   10.083242] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1
tracing 0 dfs 1 testmode 1
[   10.096229] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00033
api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 c41417d0
[   10.189809] ath10k_pci 0000:00:00.0: Direct firmware load for
ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[   10.200640] ath10k_pci 0000:00:00.0: Falling back to user helper
[   10.271745] firmware ath10k!QCA988X!hw2.0!board-2.bin:
firmware_loading_store: map pages failed
[   10.299633] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A
crc32 bebc7c08
[   10.437761] ath10k_pci 0000:00:00.0: otp calibration failed: 2
[   10.443792] ath10k_pci 0000:00:00.0: failed to run otp: -22
[   10.449551] ath10k_pci 0000:00:00.0: could not init core (-22)
[   10.455680] ath10k_pci 0000:00:00.0: could not probe fw (-22)