Running throughput tests

Kalle Valo kvalo at
Sun May 11 21:37:03 PDT 2014

Ben Greear <greearb at> writes:

> On 04/23/2014 11:44 PM, Kalle Valo wrote:
>> Bart Jooris <bart.jooris at> writes:
>>> I also have a stable 500Mbps ++ link now :-) with peaks up to 520Mbps
>>> (measured with iperf UDP).
>>> I've  made a second AP and STA with the WLE900VX cards I've exchanged
>>> with Ben (Thanks again!).
>> Good!
>>> p.s. The configuration with the sparkLAN WPEA-351AC cards still
>>> doesn't give the same results. Probably my bad, I will double check it
>>> again.
>> This is CUS223 based design, right? If you see the problem still try to
>> get debug logs. For example, debug_mask=0x432 might give some hints.
> We tried with the Sparklan today, and it locks up the system soon after we
> start hostapd, so we just removed it from the system.  The WLE900VX in same
> machine and same config works fine.

Odd. From the website[1] it looks like a normal CUS233 to me. Can you
get any more info? For example, where does it exactly lock up? Enabling
also all kernel debugging (lock debugging etc) might be also useful.

Kalle Valo

More information about the ath10k mailing list