Bridging problem in ath10k (STA)

[Yeoh Chun-Yeow]

I have tested with the following CT firmware:
http://www.candelatech.com/downloads/firmware-2-ct-community.bin

But seems not working for STA mode. I am having problem if the AP is
configured as 802.11ac. Is this FW that you mentioned?

----
ChunYeow

On Wed, Jun 4, 2014 at 5:20 PM, Vu Hai NGUYEN
<vh.nguyen at actiasodielec.fr> wrote:
>>Hi, all
>
>>I just found out that the bridging is not able to work for STA mode
>>even for firmware 10.1.467.2-1 if the AP is operating at 80MHz.
>
>>But it is working if the AP is operating at 20MHz or 802.11n instead
>>of 802.11ac. But off course, the STA needs to associate with AP first
>>before bridging.
>
>>Anyone has the similar problem?
>
> I do have the station with broken firmware in bridge network, the firmware of Ben from CT can fixe it. You can give it a try :D
>
> NGUYEN Vu Hai
> Acita-Sodielec
> Route de Mayres - B.P. 9
> 12100 St GEORGES DE LUZENCON
> FRANCE
>
>