Bridging problem in ath10k (STA)

[Vu Hai NGUYEN]

>Hi, all

>I just found out that the bridging is not able to work for STA mode
>even for firmware 10.1.467.2-1 if the AP is operating at 80MHz.

>But it is working if the AP is operating at 20MHz or 802.11n instead
>of 802.11ac. But off course, the STA needs to associate with AP first
>before bridging.

>Anyone has the similar problem?

I do have the station with broken firmware in bridge network, the firmware of Ben from CT can fixe it. You can give it a try :D

NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE